# Copyright 1999-2005 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/sys-devel/libperl/libperl-5.8.7.ebuild,v 1.16 2005/11/14 21:42:02 mcummings Exp $

# The basic theory based on comments from Daniel Robbins <drobbins@gentoo.org>.
#
# We split the perl ebuild into libperl and perl.  The layout is as follows:
#
# libperl:
#
#  This is a slotted (SLOT=[0-9]*) ebuild, meaning we should be able to have a
#  few versions that are not binary compadible installed.
#
#  How we get libperl.so multi-versioned, is by adding to the link command:
#
#    -Wl,-soname -Wl,libperl.so.`echo $(LIBPERL) | cut -d. -f3`
#
#  This gives us:
#
#    $(LIBPERL): $& perl$(OBJ_EXT) $(obj) $(LIBPERLEXPORT)
#        $(LD) -o $@ $(SHRPLDFLAGS) perl$(OBJ_EXT) $(obj) \
#              -Wl,-soname -Wl,libperl.so.`echo $(LIBPERL) | cut -d. -f3`
#
#  We then configure perl with LIBPERL set to:
#
#    LIBPERL="libperl.so.${SLOT}.`echo ${PV} | cut -d. -f1,2`"
#
#  Or with the variables defined in this ebuild:
#
#    LIBPERL="libperl.so.${PERLSLOT}.${SHORT_PV}"
#
#  The result is that our 'soname' is 'libperl.so.${PERLSLOT}' (at the time of
#  writing this for perl-5.8.0, 'libperl.so.1'), causing all apps that is linked
#  to libperl to link to 'libperl.so.${PERLSLOT}'.
#
#  If a new perl version, perl-z.y.z comes out that have a libperl not binary
#  compatible with the previous version, we just keep the previous libperl
#  installed, and all apps linked to it will still be able to use:
#
#    libperl.so.${PERLSLOT}'
#
#  while the new ones will link to:
#
#    libperl.so.$((PERLSLOT+1))'
#
# perl:
#
#  Not much to this one.  It compiles with a static libperl.a, and are unslotted
#  (meaning SLOT=0).  We thus always have the latest *stable* perl version
#  installed, with corrisponding version of libperl.  The perl ebuild will of
#  course DEPEND on libperl.
#
# Martin Schlemmer <azarah@gentoo.org> (28 Dec 2002).

IUSE="berkdb debug gdbm ithreads"

inherit eutils flag-o-matic toolchain-funcs multilib

# The slot of this binary compat version of libperl.so
PERLSLOT="1"

SHORT_PV="${PV%.*}"
MY_P="perl-${PV/_rc/-RC}"
S="${WORKDIR}/${MY_P}"
DESCRIPTION="Larry Wall's Practical Extraction and Reporting Language"
SRC_URI="ftp://ftp.cpan.org/pub/CPAN/src/${MY_P}.tar.bz2"
HOMEPAGE="http://www.perl.org"
SLOT="${PERLSLOT}"
LIBPERL="libperl$(get_libname ${PERLSLOT}.${SHORT_PV})"
LICENSE="Artistic GPL-2"
KEYWORDS="alpha ~amd64 ~arm ~hppa ia64 ~m68k ~mips ~ppc ~ppc-macos ppc64 ~s390 ~sh sparc ~x86"

# rac 2004.08.06

# i am not kidding here. you will forkbomb yourself out of existence
# because make check -n wants to make miniperl, which runs itself at
# the very end to make sure it's working right. this behaves very
# badly when you -n it, because it won't exist and will therefore try
# to build itself again ad infinitum.

RESTRICT="test"

DEPEND="!elibc_uclibc? ( sys-apps/groff )
	berkdb? ( sys-libs/db )
	gdbm? ( >=sys-libs/gdbm-1.8.0 )"

RDEPEND="
	berkdb? ( sys-libs/db )
	gdbm? ( >=sys-libs/gdbm-1.8.0 )"

PDEPEND=">=dev-lang/perl-${PV}"

pkg_setup() {
	# I think this should rather be displayed if you *have* 'ithreads'
	# in USE if it could break things ...
	if use ithreads
	then
		ewarn ""
		ewarn "PLEASE NOTE: You are compiling perl-5.8 with"
		ewarn "interpreter-level threading enabled."
		ewarn "Threading is not supported by all applications "
		ewarn "that compile against perl. You use threading at "
		ewarn "your own discretion. "
		ewarn ""
		epause 10
	else
		ewarn ""
		ewarn "PLEASE NOTE: If you want to compile perl-5.8 with"
		ewarn "threading enabled , you must restart this emerge"
		ewarn "with USE=ithreads emerge...."
		ewarn "Threading is not supported by all applications "
		ewarn "that compile against perl. You use threading at "
		ewarn "your own discretion. "
		ewarn ""
		epause 10
	fi
}

src_unpack() {

	unpack ${A}

	# Fix the build scripts to create libperl with a soname of ${SLOT}.
	# We basically add:
	#
	#   -Wl,-soname -Wl,libperl.so.`echo $(LIBPERL) | cut -d. -f3`
	#
	# to the line that links libperl.so, and then set LIBPERL to:
	#
	#   LIBPERL=libperl.so.${SLOT}.`echo ${PV} | cut -d. -f1,2`
	#
	cd ${S};
	use userland_Darwin || epatch ${FILESDIR}/${PN}-create-libperl-soname.patch

	# uclibc support - dragonheart 2004.06.16
	# Now upstreamed - MPC 2005.06.28
	#cd ${S}; epatch ${FILESDIR}/${PN}-uclibc.patch

	# Configure makes an unwarranted assumption that /bin/ksh is a
	# good shell. This patch makes it revert to using /bin/sh unless
	# /bin/ksh really is executable. Should fix bug 42665.
	# rac 2004.06.09
	cd ${S}; epatch ${FILESDIR}/${PN}-noksh.patch

	# we need the same @INC-inversion magic here we do in perl
	cd ${S}; epatch ${FILESDIR}/${PN}-reorder-INC.patch
}

src_compile() {
	# Perl has problems compiling with -Os in your flags
	use elibc_uclibc || replace-flags "-Os" "-O2"
	# This flag makes compiling crash in interesting ways
	filter-flags "-malign-double"

	export LC_ALL="C"
	local myconf=""

	if [[ ${KERNEL} == "FreeBSD" && "${ELIBC}" = "FreeBsd" ]]; then
		osname="freebsd"
	elif [[ ${KERNEL} == "NetBSD" ]]; then
		osname="netbsd"
	elif [[ ${USERLAND} == "Darwin" ]]; then
		osname="darwin"
	else
		osname="linux"
	fi

	if use ithreads
	then
		einfo "using ithreads"
		mythreading="-multi"
		myconf="-Dusethreads ${myconf}"
		myarch=$(get_abi_CHOST)
		myarch="${myarch%%-*}-${osname}-thread"
	else
		myarch=$(get_abi_CHOST)
		myarch="${myarch%%-*}-${osname}"
	fi

	ewarn "myarch: ${myarch}"

	if use gdbm
	then
		myconf="${myconf} -Di_gdbm"
	fi
	if use berkdb
	then
		myconf="${myconf} -Di_db -Di_ndbm"
	else
		myconf="${myconf} -Ui_db -Ui_ndbm"
	fi
	if use mips
	then
		# this is needed because gcc 3.3-compiled kernels will hang
		# the machine trying to run this test - check with `Kumba
		# <rac@gentoo.org> 2003.06.26
		myconf="${myconf} -Dd_u32align"
	fi

	if use debug
	then
		CFLAGS="${CFLAGS} -g"
	fi

	if use sparc
	then
		myconf="${myconf} -Ud_longdbl"
	fi

	rm -f config.sh Policy.sh

	[ -n "${ABI}" ] && myconf="${myconf} -Dusrinc=$(get_ml_incdir)"

	[[ ${ELIBC} == "FreeBSD" ]] && myconf="${myconf} -Dlibc=/usr/lib/libc.a"

	if [[ $(get_libdir) != "lib" ]] ; then
		myconf="${myconf} -Dlibpth='/usr/local/$(get_libdir) /$(get_libdir) \
		/usr/$(get_libdir)'"
	fi

	sh Configure -des \
		-Darchname="${myarch}" \
		-Dcccdlflags='-fPIC' \
		-Dccdlflags='-rdynamic' \
		-Dcc="$(tc-getCC)" \
		-Dprefix='/usr' \
		-Dvendorprefix='/usr' \
		-Dsiteprefix='/usr' \
		-Dlocincpth=' ' \
		-Doptimize="${CFLAGS}" \
		-Duselargefiles \
		-Duseshrplib \
		-Dman3ext='3pm' \
		-Dlibperl="${LIBPERL}" \
		-Dd_dosuid \
		-Dd_semctl_semun \
		-Dcf_by='Gentoo' \
		-Ud_csh \
		${myconf} || die

	emake -j1 -f Makefile depend || die "Couldn't make libperl$(get_libname) depends"
	emake -j1 -f Makefile LIBPERL=${LIBPERL} ${LIBPERL} || die "Unable to make libperl$(get_libname)"
	mv ${LIBPERL} ${WORKDIR}
}

src_install() {

	export LC_ALL="C"

	if [ "${PN}" = "libperl" ]
	then
		dolib.so ${WORKDIR}/${LIBPERL}
		if [[ ${USERLAND} == "Darwin" ]]; then
			install_name_tool -id /usr/$(get_libdir)/${LIBPERL} ${D}/usr/$(get_libdir)/${LIBPERL}
		else
			preplib
		fi
	else
		# Need to do this, else apps do not link to dynamic version of
		# the library ...
		local coredir="/usr/lib/perl5/${PV}/${myarch}${mythreading}/CORE"
		dodir ${coredir}
		dosym ../../../../../$(get_libdir)/${LIBPERL} ${coredir}/${LIBPERL}
		dosym ../../../../../$(get_libdir)/${LIBPERL} ${coredir}/libperl$(get_libname ${PERLSLOT})
		dosym ../../../../../$(get_libdir)/${LIBPERL} ${coredir}/libperl$(get_libname)

		# Fix for "stupid" modules and programs
		dodir /usr/lib/perl5/site_perl/${PV}/${myarch}${mythreading}

		make DESTDIR="${D}" \
			INSTALLMAN1DIR="${D}/usr/share/man/man1" \
			INSTALLMAN3DIR="${D}/usr/share/man/man3" \
			install || die "Unable to make install"

		cp -f utils/h2ph utils/h2ph_patched

		LD_LIBRARY_PATH=. ./perl -Ilib utils/h2ph_patched \
			-a -d ${D}/usr/lib/perl5/${PV}/${myarch}${mythreading} <<EOF
asm/termios.h
syscall.h
syslimits.h
syslog.h
sys/ioctl.h
sys/socket.h
sys/time.h
wait.h
EOF

		# This is to fix a missing c flag for backwards compat
		for i in `find ${D}/usr/lib/perl5 -iname "Config.pm"`;do
			sed -e "s:ccflags=':ccflags='-DPERL5 :" \
			    -e "s:cppflags=':cppflags='-DPERL5 :" \
				${i} > ${i}.new &&\
				mv ${i}.new ${i} || die "Sed failed"
		done

		# A poor fix for the miniperl issues
		dosed 's:./miniperl:/usr/bin/perl:' /usr/lib/perl5/${PV}/ExtUtils/xsubpp
		fperms 0444 /usr/lib/perl5/${PV}/ExtUtils/xsubpp
		dosed 's:./miniperl:/usr/bin/perl:' /usr/bin/xsubpp
		fperms 0755 /usr/bin/xsubpp

		./perl installman \
			--man1dir="${D}/usr/share/man/man1" --man1ext='1' \
			--man3dir="${D}/usr/share/man/man3" --man3ext='3'

		# This removes ${D} from Config.pm and .packlist
		for i in `find ${D} -iname "Config.pm"` `find ${D} -iname ".packlist"`;do
			einfo "Removing ${D} from ${i}..."
			sed -e "s:${D}::" ${i} > ${i}.new &&\
				mv ${i}.new ${i} || die "Sed failed"
		done
	fi

	dodoc Changes* Artistic Copying README Todo* AUTHORS

	if [ "${PN}" = "perl" ]
	then
		# HTML Documentation
		# We expect errors, warnings, and such with the following.

		dodir /usr/share/doc/${PF}/html
		./perl installhtml \
			--podroot='.' \
			--podpath='lib:ext:pod:vms' \
			--recurse \
			--htmldir="${D}/usr/share/doc/${PF}/html" \
			--libpods='perlfunc:perlguts:perlvar:perlrun:perlop'
	fi
}

pkg_postinst() {

	# Make sure we do not have stale/invalid libperl.so 's ...
	if [ -f "${ROOT}usr/$(get_libdir)/libperl$(get_libname)" -a ! -L "${ROOT}usr/$(get_libdir)/libperl$(get_libname)" ]
	then
		mv -f ${ROOT}usr/$(get_libdir)/libperl$(get_libname) ${ROOT}usr/$(get_libdir)/libperl$(get_libname).old
	fi

	# Next bit is to try and setup the /usr/lib/libperl.so symlink
	# properly ...
	local libnumber="`ls -1 ${ROOT}usr/$(get_libdir)/libperl$(get_libname ?.*) | grep -v '\.old' | wc -l`"
	if [ "${libnumber}" -eq 1 ]
	then
		# Only this version of libperl is installed, so just link libperl.so
		# to the *soname* version of it ...
		ln -snf libperl$(get_libname ${PERLSLOT}) ${ROOT}usr/$(get_libdir)/libperl$(get_libname)
	else
		if [ -x "${ROOT}/usr/bin/perl" ]
		then
			# OK, we have more than one version .. first try to figure out
			# if there are already a perl installed, if so, link libperl.so
			# to that *soname* version of libperl.so ...
			local perlversion="`${ROOT}/usr/bin/perl -V:version | cut -d\' -f2 | cut -d. -f1,2`"

			cd ${ROOT}usr/$(get_libdir)
			# Link libperl.so to the *soname* versioned lib ...
			ln -snf `echo libperl$(get_libname ?.${perlversion}) | cut -d.  -f1,2,3` libperl$(get_libname)
		else
			local x latest

			# Nope, we are not so lucky ... try to figure out what version
			# is the latest, and keep fingers crossed ...
			for x in `ls -1 ${ROOT}usr/$(get_libdir)/libperl$(get_libname ?.*)`
			do
				latest="${x}"
			done

			cd ${ROOT}usr/$(get_libdir)
			# Link libperl.so to the *soname* versioned lib ...
			ln -snf `echo ${latest##*/} | cut -d. -f1,2,3` libperl$(get_libname)
		fi
	fi
}