Backported by Tom Wijsman for http://forums.gentoo.org/viewtopic-p-7421356.html --- From 63b66e5ba54b15a6592be00555d762db6db739ce Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 08 Aug 2013 13:12:06 +0000 Subject: drm/i915: Don't deref pipe->cpu_transcoder in the hangcheck code If we get an error event really early in the driver setup sequence, which gen3 is especially prone to with various display GTT faults we Oops. So try to avoid this. Additionally with Haswell the transcoders are a separate bank of registers from the pipes (4 transcoders, 3 pipes). In event of an error, we want to be sure we have a complete and accurate picture of the machine state, so record all the transcoders in addition to all the active pipes. This regression has been introduced in commit 702e7a56af3780d8b3a717f698209bef44187bb0 Author: Paulo Zanoni Date: Tue Oct 23 18:29:59 2012 -0200 drm/i915: convert PIPECONF to use transcoder instead of pipe Based on the patch "drm/i915: Dump all transcoder registers on error" from Chris Wilson: v2: Rebase so that we don't try to be clever and try to figure out the cpu transcoder from hw state. That exercise should be done when we analyze the error state offline. The actual bugfix is to not call intel_pipe_to_cpu_transcoder in the error state capture code in case the pipes aren't fully set up yet. v3: Simplifiy the err->num_transcoders computation a bit. While at it make the error capture stuff save on systems without a display block. v4: Fix fail, spotted by Jani. v5: Completely new commit message, cc: stable. Cc: Paulo Zanoni Cc: Damien Lespiau Cc: Jani Nikula Cc: Chris Wilson Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60021 Cc: stable@vger.kernel.org Tested-by: Dustin King Reviewed-by: Jani Nikula Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index e38b457..be79f47 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10042,6 +10042,8 @@ #include struct intel_display_error_state { + int num_transcoders; + struct intel_cursor_error_state { u32 control; u32 position; @@ -10050,15 +10052,7 @@ struct intel_display_error_state { } cursor[I915_MAX_PIPES]; struct intel_pipe_error_state { - u32 conf; u32 source; - - u32 htotal; - u32 hblank; - u32 hsync; - u32 vtotal; - u32 vblank; - u32 vsync; } pipe[I915_MAX_PIPES]; struct intel_plane_error_state { @@ -10071,6 +10064,19 @@ struct intel_display_error_state { u32 surface; u32 tile_offset; } plane[I915_MAX_PIPES]; + + struct intel_transcoder_error_state { + enum transcoder cpu_transcoder; + + u32 conf; + + u32 htotal; + u32 hblank; + u32 hsync; + u32 vtotal; + u32 vblank; + u32 vsync; + } transcoder[4]; }; struct intel_display_error_state * @@ -10078,9 +10084,17 @@ intel_display_capture_error_state(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; struct intel_display_error_state *error; - enum transcoder cpu_transcoder; + int transcoders[] = { + TRANSCODER_A, + TRANSCODER_B, + TRANSCODER_C, + TRANSCODER_EDP, + }; int i; + if (INTEL_INFO(dev)->num_pipes == 0) + return NULL; + error = kmalloc(sizeof(*error), GFP_ATOMIC); if (error == NULL) return NULL; @@ -10089,8 +10103,6 @@ intel_display_capture_error_state(struct drm_device *dev) return NULL; for_each_pipe(i) { - cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, i); - if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev)) { error->cursor[i].control = I915_READ(CURCNTR(i)); error->cursor[i].position = I915_READ(CURPOS(i)); @@ -10115,14 +10126,25 @@ intel_display_capture_error_state(struct drm_device *dev) error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i)); } - error->pipe[i].conf = I915_READ(PIPECONF(cpu_transcoder)); error->pipe[i].source = I915_READ(PIPESRC(i)); - error->pipe[i].htotal = I915_READ(HTOTAL(cpu_transcoder)); - error->pipe[i].hblank = I915_READ(HBLANK(cpu_transcoder)); - error->pipe[i].hsync = I915_READ(HSYNC(cpu_transcoder)); - error->pipe[i].vtotal = I915_READ(VTOTAL(cpu_transcoder)); - error->pipe[i].vblank = I915_READ(VBLANK(cpu_transcoder)); - error->pipe[i].vsync = I915_READ(VSYNC(cpu_transcoder)); + } + + error->num_transcoders = INTEL_INFO(dev)->num_pipes; + if (HAS_DDI(dev_priv->dev)) + error->num_transcoders++; /* Account for eDP. */ + + for (i = 0; i < error->num_transcoders; i++) { + enum transcoder cpu_transcoder = transcoders[i]; + + error->transcoder[i].cpu_transcoder = cpu_transcoder; + + error->transcoder[i].conf = I915_READ(PIPECONF(cpu_transcoder)); + error->transcoder[i].htotal = I915_READ(HTOTAL(cpu_transcoder)); + error->transcoder[i].hblank = I915_READ(HBLANK(cpu_transcoder)); + error->transcoder[i].hsync = I915_READ(HSYNC(cpu_transcoder)); + error->transcoder[i].vtotal = I915_READ(VTOTAL(cpu_transcoder)); + error->transcoder[i].vblank = I915_READ(VBLANK(cpu_transcoder)); + error->transcoder[i].vsync = I915_READ(VSYNC(cpu_transcoder)); } /* In the code above we read the registers without checking if the power @@ -10144,17 +10166,13 @@ intel_display_print_error_state(struct seq_file *m, { int i; + if (!error) + return; + seq_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes); for_each_pipe(i) { seq_printf(m, "Pipe [%d]:\n", i); - seq_printf(m, " CONF: %08x\n", error->pipe[i].conf); seq_printf(m, " SRC: %08x\n", error->pipe[i].source); - seq_printf(m, " HTOTAL: %08x\n", error->pipe[i].htotal); - seq_printf(m, " HBLANK: %08x\n", error->pipe[i].hblank); - seq_printf(m, " HSYNC: %08x\n", error->pipe[i].hsync); - seq_printf(m, " VTOTAL: %08x\n", error->pipe[i].vtotal); - seq_printf(m, " VBLANK: %08x\n", error->pipe[i].vblank); - seq_printf(m, " VSYNC: %08x\n", error->pipe[i].vsync); seq_printf(m, "Plane [%d]:\n", i); seq_printf(m, " CNTR: %08x\n", error->plane[i].control); @@ -10180,5 +10196,17 @@ intel_display_print_error_state(struct seq_file *m, seq_printf(m, " POS: %08x\n", error->cursor[i].position); seq_printf(m, " BASE: %08x\n", error->cursor[i].base); } + + for (i = 0; i < error->num_transcoders; i++) { + seq_printf(m, " CPU transcoder: %c\n", + transcoder_name(error->transcoder[i].cpu_transcoder)); + seq_printf(m, " CONF: %08x\n", error->transcoder[i].conf); + seq_printf(m, " HTOTAL: %08x\n", error->transcoder[i].htotal); + seq_printf(m, " HBLANK: %08x\n", error->transcoder[i].hblank); + seq_printf(m, " HSYNC: %08x\n", error->transcoder[i].hsync); + seq_printf(m, " VTOTAL: %08x\n", error->transcoder[i].vtotal); + seq_printf(m, " VBLANK: %08x\n", error->transcoder[i].vblank); + seq_printf(m, " VSYNC: %08x\n", error->transcoder[i].vsync); + } } #endif -- cgit v0.9.2