# Copyright 1999-2005 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 # $Header: /var/cvsroot/gentoo-x86/eclass/vdr-plugin.eclass,v 1.53 2008/02/13 19:44:44 zzam Exp $ # # Author: # Matthias Schwarzott # Joerg Bornkessel # vdr-plugin.eclass # # eclass to create ebuilds for vdr plugins # # Example ebuild (vdr-femon): # # inherit vdr-plugin # IUSE="" # SLOT="0" # DESCRIPTION="vdr Plugin: DVB Frontend Status Monitor (signal strengt/noise)" # HOMEPAGE="http://www.saunalahti.fi/~rahrenbe/vdr/femon/" # SRC_URI="http://www.saunalahti.fi/~rahrenbe/vdr/femon/files/${P}.tgz" # LICENSE="GPL-2" # KEYWORDS="~x86" # DEPEND=">=media-video/vdr-1.3.27" # # # Installation of a config file for the plugin # # If ${VDR_CONFD_FILE} is set install this file # else install ${FILESDIR}/confd if it exists. # Gets installed as /etc/conf.d/vdr.${VDRPLUGIN}. # For the plugin vdr-femon this would be /etc/conf.d/vdr.femon # Installation of an rc-addon file for the plugin # # If ${VDR_RCADDON_FILE} is set install this file # else install ${FILESDIR}/rc-addon.sh if it exists. # # Gets installed under ${VDR_RC_DIR}/plugin-${VDRPLUGIN}.sh # (in example vdr-femon this would be /usr/share/vdr/rcscript/plugin-femon.sh) # # This file is sourced by the startscript when plugin is activated in /etc/conf.d/vdr # It could be used for special startup actions for this plugins, or to create the # plugin command line options from a nicer version of a conf.d file. # HowTo use own local patches; Example # # Add to your /etc/make.conf: # VDR_LOCAL_PATCHES_DIR="/usr/local/patch" # # Add two DIR's in your local patch dir, ${PN}/${PV}, # e.g for vdr-burn-0.1.0 should be: # /usr/local/patch/vdr-burn/0.1.0/ # # all patches which ending on diff or patch in this DIR will automatically applied # inherit base multilib eutils flag-o-matic IUSE="" # Name of the plugin stripped from all vdrplugin-, vdr- and -cvs pre- and postfixes VDRPLUGIN="${PN/#vdrplugin-/}" VDRPLUGIN="${VDRPLUGIN/#vdr-/}" VDRPLUGIN="${VDRPLUGIN/%-cvs/}" DESCRIPTION="vdr Plugin: ${VDRPLUGIN} (based on vdr-plugin.eclass)" # works in most cases S="${WORKDIR}/${VDRPLUGIN}-${PV}" # depend on headers for DVB-driver DEPEND=">=media-tv/gentoo-vdr-scripts-0.3.8 || ( >=media-tv/gentoo-vdr-scripts-0.4.2 >=media-tv/vdrplugin-rebuild-0.2 ) >=app-admin/eselect-vdr-0.0.2 media-tv/linuxtv-dvb-headers" # New method of storing plugindb # Called from src_install # file maintained by normal portage-methods create_plugindb_file() { local NEW_VDRPLUGINDB_DIR=/usr/share/vdr/vdrplugin-rebuild/ local DB_FILE="${NEW_VDRPLUGINDB_DIR}/${CATEGORY}-${PF}" insinto "${NEW_VDRPLUGINDB_DIR}" # BUG: portage-2.1.4_rc9 will delete the EBUILD= line, so we cannot use this code. # cat <<-EOT > "${D}/${DB_FILE}" # VDRPLUGIN_DB=1 # CREATOR=ECLASS # EBUILD=${CATEGORY}/${PN} # EBUILD_V=${PVR} # EOT { echo "VDRPLUGIN_DB=1" echo "CREATOR=ECLASS" echo "EBUILD=${CATEGORY}/${PN}" echo "EBUILD_V=${PVR}" } > "${D}/${DB_FILE}" } # Delete files created outside of vdr-plugin.eclass # vdrplugin-rebuild.ebuild converted plugindb and files are # not deleted by portage itself - should only be needed as # long as not every system has switched over to # vdrplugin-rebuild-0.2 / gentoo-vdr-scripts-0.4.2 delete_orphan_plugindb_file() { #elog Testing for orphaned plugindb file local NEW_VDRPLUGINDB_DIR=/usr/share/vdr/vdrplugin-rebuild/ local DB_FILE="${ROOT}/${NEW_VDRPLUGINDB_DIR}/${CATEGORY}-${PF}" # file exists [[ -f ${DB_FILE} ]] || return # will portage handle the file itself if grep -q CREATOR=ECLASS "${DB_FILE}"; then #elog file owned by eclass - don't touch it return fi elog "Removing orphaned plugindb-file." elog "\t#rm ${DB_FILE}" rm "${DB_FILE}" } create_header_checksum_file() { # Danger: Not using $ROOT here, as compile will also not use it !!! # If vdr in $ROOT and / differ, plugins will not run anyway insinto "${VDR_CHECKSUM_DIR}" if [[ -f ${VDR_CHECKSUM_DIR}/header-md5-vdr ]]; then newins "${VDR_CHECKSUM_DIR}/header-md5-vdr header-md5-${PN}" else if type -p md5sum >/dev/null 2>&1; then cd "${S}" ( cd "${VDR_INCLUDE_DIR}" md5sum *.h libsi/*.h|LC_ALL=C sort --key=2 ) > header-md5-${PN} doins header-md5-${PN} fi fi } vdr-plugin_pkg_setup() { # -fPIC is needed for shared objects on some platforms (amd64 and others) append-flags -fPIC # Where should the plugins live in the filesystem VDR_PLUGIN_DIR="/usr/$(get_libdir)/vdr/plugins" VDR_CHECKSUM_DIR="${VDR_PLUGIN_DIR%/plugins}/checksums" # was /usr/lib/... some time ago # since gentoo-vdr-scripts-0.3.6 it works with /usr/share/... VDR_RC_DIR="/usr/share/vdr/rcscript" # Pathes to includes VDR_INCLUDE_DIR="/usr/include/vdr" DVB_INCLUDE_DIR="/usr/include" TMP_LOCALE_DIR="${WORKDIR}/tmp-locale" LOCDIR="/usr/share/vdr/locale" if has_version ">=media-video/vdr-1.5.7"; then USE_GETTEXT=1 else USE_GETTEXT=0 fi VDRVERSION=$(awk -F'"' '/define VDRVERSION/ {print $2}' "${VDR_INCLUDE_DIR}"/config.h) APIVERSION=$(awk -F'"' '/define APIVERSION/ {print $2}' "${VDR_INCLUDE_DIR}"/config.h) [[ -z ${APIVERSION} ]] && APIVERSION="${VDRVERSION}" einfo "Building ${PF} against vdr-${VDRVERSION}" einfo "APIVERSION: ${APIVERSION}" } vdr-plugin_src_unpack() { if [[ -z ${VDR_INCLUDE_DIR} ]]; then eerror "Wrong use of vdr-plugin.eclass." eerror "An ebuild for a vdr-plugin will not work without calling vdr-plugin_pkg_setup." echo eerror "Please report this at bugs.gentoo.org." die "vdr-plugin_pkg_setup not called!" fi [ -z "$1" ] && vdr-plugin_src_unpack unpack add_local_patch patchmakefile i18n while [ "$1" ]; do case "$1" in all_but_unpack) vdr-plugin_src_unpack add_local_patch patchmakefile i18n ;; unpack) base_src_unpack ;; patchmakefile) if ! cd "${S}"; then ewarn "There seems to be no plugin-directory with the name ${S##*/}" ewarn "Perhaps you find one among these:" cd "${WORKDIR}" ewarn "$(/bin/ls -1 "${WORKDIR}")" die "Could not change to plugin-source-directory!" fi einfo "Patching Makefile" [[ -e Makefile ]] || die "Makefile of plugin can not be found!" cp Makefile "${WORKDIR}"/Makefile.before sed -i Makefile \ -e '1i\#Makefile was patched by vdr-plugin.eclass' ebegin " Setting Pathes" sed -i Makefile \ -e "s:^VDRDIR.*$:VDRDIR = ${VDR_INCLUDE_DIR}:" \ -e "s:^DVBDIR.*$:DVBDIR = ${DVB_INCLUDE_DIR}:" \ -e "s:^LIBDIR.*$:LIBDIR = ${S}:" \ -e "s:^TMPDIR.*$:TMPDIR = ${T}:" \ -e 's:-I$(VDRDIR)/include -I$(DVBDIR)/include:-I$(DVBDIR)/include -I$(VDRDIR)/include:' \ -e 's:-I$(VDRDIR)/include:-I'"${VDR_INCLUDE_DIR%vdr}"':' \ -e 's:-I$(DVBDIR)/include:-I$(DVBDIR):' eend $? ebegin " Converting to APIVERSION" sed -i Makefile \ -e 's:^APIVERSION = :APIVERSION ?= :' \ -e 's:$(LIBDIR)/$@.$(VDRVERSION):$(LIBDIR)/$@.$(APIVERSION):' \ -e '2i\APIVERSION = '"${APIVERSION}" eend $? ebegin " Correcting Compile-Flags" sed -i Makefile \ -e 's:^CXXFLAGS:#CXXFLAGS:' \ -e '/LDFLAGS/!s:-shared:$(LDFLAGS) -shared:' eend $? ebegin " Disabling file stripping" sed -i Makefile \ -e '/@.*strip/d' \ -e '/strip \$(LIBDIR)\/\$@/d' \ -e '/^STRIP =/d' \ -e '/@.*\$(STRIP)/d' eend $? # Use a file instead of an variable as single-stepping via ebuild # destroys environment. touch "${WORKDIR}"/.vdr-plugin_makefile_patched ;; add_local_patch) cd "${S}" if test -d "${VDR_LOCAL_PATCHES_DIR}/${PN}"; then echo einfo "Applying local patches" for LOCALPATCH in "${VDR_LOCAL_PATCHES_DIR}/${PN}/${PV}"/*.{diff,patch}; do test -f "${LOCALPATCH}" && epatch "${LOCALPATCH}" done fi ;; i18n) cd "${S}" if [[ ${USE_GETTEXT} = 0 ]]; then # Remove i18n Target if using older vdr sed -i Makefile \ -e '/^all:/s/ i18n//' elif [[ ${USE_GETTEXT} = 1 && ! -d po && ${NO_GETTEXT_HACK} != 1 ]]; then einfo "Converting translations to gettext" local i18n_tool="${ROOT}/usr/share/vdr/bin/i18n-to-gettext.pl" if [[ ! -x ${i18n_tool} ]]; then eerror "Missing ${i18n_tool}" eerror "Please re-emerge vdr" die "Missing ${i18n_tool}" fi # call i18n-to-gettext tool # take all texts missing tr call into special file "${i18n_tool}" 2>/dev/null \ |sed -e '/^"/!d' \ -e '/^""$/d' \ -e 's/\(.*\)/trNOOP(\1)/' \ > dummy-translations-trNOOP.c # if there were untranslated texts just run it again # now the missing calls are listed in # dummy-translations-trNOOP.c if [[ -s dummy-translations-trNOOP.c ]]; then "${i18n_tool}" &>/dev/null fi # now use the modified Makefile mv Makefile.new Makefile fi esac shift done } vdr-plugin_copy_source_tree() { pushd . >/dev/null cp -r "${S}" "${T}"/source-tree cd "${T}"/source-tree cp "${WORKDIR}"/Makefile.before Makefile sed -i Makefile \ -e "s:^DVBDIR.*$:DVBDIR = ${DVB_INCLUDE_DIR}:" \ -e 's:^CXXFLAGS:#CXXFLAGS:' \ -e 's:-I$(DVBDIR)/include:-I$(DVBDIR):' \ -e 's:-I$(VDRDIR) -I$(DVBDIR):-I$(DVBDIR) -I$(VDRDIR):' popd >/dev/null } vdr-plugin_install_source_tree() { einfo "Installing sources" destdir="${VDRSOURCE_DIR}/vdr-${VDRVERSION}/PLUGINS/src/${VDRPLUGIN}" insinto "${destdir}-${PV}" doins -r "${T}"/source-tree/* dosym "${VDRPLUGIN}-${PV}" "${destdir}" } vdr-plugin_src_compile() { [ -z "$1" ] && vdr-plugin_src_compile prepare compile while [ "$1" ]; do case "$1" in prepare) [[ -n "${VDRSOURCE_DIR}" ]] && vdr-plugin_copy_source_tree ;; compile) if [[ ! -f ${WORKDIR}/.vdr-plugin_makefile_patched ]]; then eerror "Wrong use of vdr-plugin.eclass." eerror "An ebuild for a vdr-plugin will not work without" eerror "calling vdr-plugin_src_unpack to patch the Makefile." echo eerror "Please report this at bugs.gentoo.org." die "vdr-plugin_src_unpack not called!" fi cd "${S}" emake ${BUILD_PARAMS} \ ${VDRPLUGIN_MAKE_TARGET:-all} \ LOCALEDIR="${TMP_LOCALE_DIR}" \ || die "emake failed" ;; esac shift done } vdr-plugin_src_install() { [[ -n "${VDRSOURCE_DIR}" ]] && vdr-plugin_install_source_tree cd "${WORKDIR}" if [[ -n ${VDR_MAINTAINER_MODE} ]]; then local mname="${P}-Makefile" cp "${S}"/Makefile "${mname}.patched" cp Makefile.before "${mname}.before" diff -u "${mname}.before" "${mname}.patched" > "${mname}.diff" insinto "/usr/share/vdr/maintainer-data/makefile-changes" doins "${mname}.diff" insinto "/usr/share/vdr/maintainer-data/makefile-before" doins "${mname}.before" insinto "/usr/share/vdr/maintainer-data/makefile-patched" doins "${mname}.patched" fi cd "${S}" insinto "${VDR_PLUGIN_DIR}" doins libvdr-*.so.* if [[ ${USE_GETTEXT} = 1 && -d ${TMP_LOCALE_DIR} ]]; then einfo "Installing locales" cd "${TMP_LOCALE_DIR}" insinto "${LOCDIR}" doins -r * fi cd "${S}" local docfile for docfile in README* HISTORY CHANGELOG; do [[ -f ${docfile} ]] && dodoc ${docfile} done # if VDR_CONFD_FILE is empty and ${FILESDIR}/confd exists take it [[ -z ${VDR_CONFD_FILE} ]] && [[ -e ${FILESDIR}/confd ]] && VDR_CONFD_FILE=${FILESDIR}/confd if [[ -n ${VDR_CONFD_FILE} ]]; then newconfd "${VDR_CONFD_FILE}" vdr.${VDRPLUGIN} fi # if VDR_RCADDON_FILE is empty and ${FILESDIR}/rc-addon.sh exists take it [[ -z ${VDR_RCADDON_FILE} ]] && [[ -e ${FILESDIR}/rc-addon.sh ]] && VDR_RCADDON_FILE=${FILESDIR}/rc-addon.sh if [[ -n ${VDR_RCADDON_FILE} ]]; then insinto "${VDR_RC_DIR}" newins "${VDR_RCADDON_FILE}" plugin-${VDRPLUGIN}.sh fi create_header_checksum_file create_plugindb_file } vdr-plugin_print_enable_command() { ewarn "emerge --config ${PN} is deprecated" elog elog "To activate this vdr-plugin execute the following command:" elog "\teselect vdr-plugin enable ${PN#vdr-}" elog } vdr-plugin_pkg_postinst() { vdr-plugin_print_enable_command if [[ -n "${VDR_CONFD_FILE}" ]]; then elog "Please have a look at the config-file" elog "\t/etc/conf.d/vdr.${VDRPLUGIN}" elog fi } vdr-plugin_pkg_postrm() { delete_orphan_plugindb_file } vdr-plugin_pkg_config_legacy() { elog "Using old interface to gentoo-vdr-scripts-0.3.7" if [[ -z "${INSTALLPLUGIN}" ]]; then INSTALLPLUGIN="${VDRPLUGIN}" fi active=0 # First test if plugin is already inside PLUGINS local conf=/etc/conf.d/vdr.plugins exec 3<${conf} while read -u 3 line; do [[ ${line} == "" ]] && continue [[ ${line:0:1} == "#" ]] && continue set -- ${line} [[ ${1} == ${INSTALLPLUGIN} ]] && active=1 done exec 3<&- if [[ $active == 0 ]]; then elog "Adding ${INSTALLPLUGIN} to active plugins." # The pure edit process. echo "${INSTALLPLUGIN}" >> "${conf}" else elog "${INSTALLPLUGIN} already activated" echo read -p "Do you want to deactivate ${INSTALLPLUGIN} (yes/no) " answer if [[ "${answer}" != "yes" ]]; then elog "aborted" return fi elog "Removing ${INSTALLPLUGIN} from active plugins." # The pure edit process sed -i "${conf}" -e "/^[[:space:]]*${INSTALLPLUGIN}[[:space:]]*\$/d" fi } vdr-plugin_pkg_config() { vdr-plugin_print_enable_command einfo "Calling this now" eselect vdr-plugin enable "${PN#vdr-}" } fix_vdr_libsi_include() { einfo "Fixing include of libsi-headers" local f for f; do sed -i "${f}" \ -e '/#include/s:"\(.*libsi.*\)":<\1>:' \ -e '/#include/s:<.*\(libsi/.*\)>::' done } EXPORT_FUNCTIONS pkg_setup src_unpack src_compile src_install pkg_postinst pkg_postrm pkg_config