Removed Files: vmware-mod.eclass vmware.eclass

3 files changed, 5 insertions, 543 deletions

diff --git a/eclass/ChangeLog b/eclass/ChangeLog
index f8369b269e9d..492cfd4218bc 100644
--- a/eclass/ChangeLog
+++ b/eclass/ChangeLog
@@ -1,6 +1,10 @@
 # ChangeLog for eclass directory
 # Copyright 1999-2012 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/eclass/ChangeLog,v 1.385 2012/09/01 09:39:07 ulm Exp $
+# $Header: /var/cvsroot/gentoo-x86/eclass/ChangeLog,v 1.386 2012/09/01 20:49:01 vadimk Exp $
+
+  01 Sep 2012; Vadim Kuznetsov vadimk@gentoo.org -vmware.eclass,
+  -vmware-mod.eclass:
+  removed vmware and vmware-mod elsasses
 
   01 Sep 2012; Ulrich Müller <ulm@gentoo.org> elisp-common.eclass:
   Suppress warning message in elisp-site-regen for initial installation.
diff --git a/eclass/vmware-mod.eclass b/eclass/vmware-mod.eclass
deleted file mode 100644
index 116111a0433b..000000000000
--- a/eclass/vmware-mod.eclass
+++ /dev/null
@@ -1,128 +0,0 @@
-# Copyright 1999-2012 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/eclass/vmware-mod.eclass,v 1.21 2012/08/11 14:04:11 ssuominen Exp $
-
-# @DEAD
-
-# Ensure vmware comes before linux-mod since we want linux-mod's pkg_preinst and
-# pkg_postinst, along with our own pkg_setup, src_unpack and src_compile
-inherit flag-o-matic eutils vmware linux-mod toolchain-funcs
-
-DESCRIPTION="Modules for Vmware Programs"
-HOMEPAGE="http://www.vmware.com/"
-SRC_URI="http://platan.vc.cvut.cz/ftp/pub/vmware/${ANY_ANY}.tar.gz
-	http://platan.vc.cvut.cz/ftp/pub/vmware/obsolete/${ANY_ANY}.tar.gz
-	http://knihovny.cvut.cz/ftp/pub/vmware/${ANY_ANY}.tar.gz
-	http://knihovny.cvut.cz/ftp/pub/vmware/obsolete/${ANY_ANY}.tar.gz
-	http://ftp.cvut.cz/vmware/${ANY_ANY}.tar.gz
-	http://ftp.cvut.cz/vmware/obsolete/${ANY_ANY}.tar.gz"
-LICENSE="vmware"
-SLOT="0"
-IUSE=""
-
-RDEPEND=""
-DEPEND="${RDEPEND}
-	virtual/pkgconfig"
-
-# Provide vaguely sensible defaults
-[[ -z "${VMWARE_VER}" ]] && VMWARE_VER="VME_V55"
-VMWARE_MOD_DIR="${ANY_ANY}"
-
-S="${WORKDIR}"
-
-# We needn't restrict this since it was only required to read
-# /etc/vmware/locations to determine the version (which is now fixed by
-# VMWARE_VER)
-# RESTRICT="userpriv"
-
-EXPORT_FUNCTIONS pkg_setup src_unpack src_install
-
-vmware-mod_pkg_setup() {
-	linux-mod_pkg_setup
-	# Must define VMWARE_VER to make, otherwise it'll try and run getversion.pl
-	BUILD_TARGETS="auto-build VMWARE_VER=${VMWARE_VER} KERNEL_DIR=${KERNEL_DIR} KBUILD_OUTPUT=${KV_OUT_DIR}"
-
-	vmware_determine_product
-	# We create a group for VMware users due to bugs #104480 and #106170
-	enewgroup "${VMWARE_GROUP}"
-
-	if [[ -z "${VMWARE_MODULE_LIST}" ]]; then
-		case ${product} in
-			vmware-tools)
-				VMWARE_MODULE_LIST="${VMWARE_MODULE_LIST} vmxnet"
-				[ "$shortname" != "server-tools" ] && VMWARE_MODULE_LIST="${VMWARE_MODULE_LIST} vmhgfs vmmemctl"
-				use amd64 || VMWARE_MODULE_LIST="${VMWARE_MODULE_LIST} vmdesched"
-				;;
-			*)
-				VMWARE_MODULE_LIST="${VMWARE_MODULE_LIST} vmmon vmnet"
-				;;
-		esac
-	fi
-
-	filter-flags -mfpmath=sse
-
-	for mod in ${VMWARE_MODULE_LIST}; do
-	MODULE_NAMES="${MODULE_NAMES}
-				  ${mod}(misc:${S}/${mod}-only)"
-	done
-}
-
-vmware-mod_src_unpack() {
-	case ${product} in
-		vmware-tools)
-			# Do nothing, this should be dealt with by vmware.eclass unpack
-			;;
-		*)
-			unpack ${A}
-			;;
-	esac
-
-	for mod in ${VMWARE_MODULE_LIST}; do
-		cd "${S}"
-		unpack ./"${VMWARE_MOD_DIR}"/${mod}.tar
-		cd "${S}"/${mod}-only
-		# Ensure it's not used
-		# rm getversion.pl
-		if [[ "${VMWARE_MOD_DIR}" = "${ANY_ANY}" ]] ; then
-			EPATCH_SUFFIX="patch"
-			epatch "${FILESDIR}"/patches
-			[[ -d "${FILESDIR}"/patches/${mod} ]] && epatch "${FILESDIR}"/patches/${mod}
-		fi
-		convert_to_m "${S}"/${mod}-only/Makefile
-	done
-}
-
-vmware-mod_src_install() {
-	# this adds udev rules for vmmon*
-	if [[ -n "`echo ${VMWARE_MODULE_LIST} | grep vmmon`" ]];
-	then
-		local udevdir=/lib/udev
-		has_version sys-fs/udev && udevdir="$($(tc-getPKG_CONFIG) --variable=udevdir udev)"
-		dodir "${udevdir}"/rules.d
-		echo 'KERNEL=="vmmon*", GROUP="'$VMWARE_GROUP'" MODE=660' >> "${D}/${udevdir}"/rules.d/60-vmware.rules || die
-		echo 'KERNEL=="vmnet*", GROUP="'$VMWARE_GROUP'" MODE=660' >> "${D}/${udevdir}"/rules.d/60-vmware.rules || die
-	fi
-
-	linux-mod_src_install
-}
-
-# Current VMWARE product mappings
-# 'VME_TOT'		= .0
-# 'VME_GSX1'	= .1
-# 'VME_GSX2'	= .2
-# 'VME_GSX251'	= .3
-# 'VME_GSX25'	= .4
-# 'VME_GSX32'	= .5
-# 'VME_V3'		= .6
-# 'VME_V32'		= .7
-# 'VME_V321'	= .8
-# 'VME_V4'		= .9
-# 'VME_V45'		= .10
-# 'VME_V452'	= .11
-# 'VME_V5'		= .12
-# 'VME_V55'		= .13
-# 'VME_S1B1'	= .14
-# 'VME_S1??'	= .15
-# 'VME_V6'      = .16
-# 'VME_V6'      = .17  (6.0.2)
-# 'VME_S2B1'    = .18
diff --git a/eclass/vmware.eclass b/eclass/vmware.eclass
deleted file mode 100644
index 0980aabfc90b..000000000000
--- a/eclass/vmware.eclass
+++ /dev/null
@@ -1,414 +0,0 @@
-# Copyright 1999-2012 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/eclass/vmware.eclass,v 1.36 2012/07/01 19:43:30 vadimk Exp $
-
-# @DEAD
-
-# This eclass is for all vmware-* ebuilds in the tree and should contain all
-# of the common components across the multiple packages.
-
-# Only one package per "product" is allowed to be installed at any given time.
-
-inherit pax-utils eutils cdrom
-
-EXPORT_FUNCTIONS pkg_preinst pkg_postinst pkg_setup src_install src_unpack pkg_postrm
-
-DEPEND="x11-misc/shared-mime-info"
-
-export ANY_ANY="vmware-any-any-update115"
-#export TOOLS_ANY="vmware-tools-any-update1"
-export VMWARE_GROUP=${VMWARE_GROUP:-vmware}
-export VMWARE_INSTALL_DIR=/opt/${PN//-//}
-
-vmware_create_initd() {
-	dodir "${config_dir}"/init.d/rc{0,1,2,3,4,5,6}.d
-	# This is to fix a problem where if someone merges vmware and then
-	# before configuring vmware they upgrade or re-merge the vmware
-	# package which would rmdir the /etc/vmware/init.d/rc?.d directories.
-	keepdir "${config_dir}"/init.d/rc{0,1,2,3,4,5,6}.d
-}
-
-vmware_run_questions() {
-	vmware_determine_product
-	# Questions:
-	einfo "Adding answers to ${config_dir}/locations"
-	locations="${D}${config_dir}/locations"
-	echo "answer BINDIR ${VMWARE_INSTALL_DIR}/bin" >> ${locations}
-	echo "answer LIBDIR ${VMWARE_INSTALL_DIR}/lib" >> ${locations}
-	echo "answer MANDIR ${VMWARE_INSTALL_DIR}/man" >> ${locations}
-	echo "answer DOCDIR ${VMWARE_INSTALL_DIR}/doc" >> ${locations}
-	if [ "${product}" == "vmware" -o "${product}" == "vmware-tools" ]
-	then
-		echo "answer SBINDIR ${VMWARE_INSTALL_DIR}/sbin" >> ${locations}
-		echo "answer RUN_CONFIGURATOR no" >> ${locations}
-		echo "answer INITDIR ${config_dir}/init.d" >> ${locations}
-		echo "answer INITSCRIPTSDIR ${config_dir}/init.d" >> ${locations}
-	fi
-}
-
-vmware_determine_product() {
-	# Set the product category, and the category options
-	shortname=$(echo ${PN} | cut -d- -f2-)
-	case "${shortname}" in
-		workstation|server|player)
-			product="vmware"
-			config_program="vmware-config.pl"
-			;;
-		server-console|esx-console|gsx-console)
-			product="vmware-console"
-			config_program="vmware-config-console.pl"
-			;;
-		workstation-tools|esx-tools|gsx-tools|server-tools)
-			product="vmware-tools"
-			config_program="vmware-config-tools.pl"
-			;;
-		*)
-			product="unknown"
-			;;
-	esac
-	config_dir="/etc/${product}"
-
-	# Set per package options
-	case "${shortname}" in
-		workstation)
-			FULL_NAME="Workstation"
-			;;
-		player)
-			FULL_NAME="Player"
-			;;
-		server)
-			FULL_NAME="Server"
-			;;
-		server-console)
-			FULL_NAME="Server Console"
-			config_program="vmware-config-server-console.pl"
-			config_dir="/etc/${PN}"
-			;;
-		esx-console)
-			FULL_NAME="ESX Console"
-			;;
-	esac
-}
-
-vmware_pkg_setup() {
-	vmware_determine_product
-}
-
-vmware_src_unpack() {
-	vmware_determine_product
-	case "${product}" in
-		vmware-tools)
-			# We grab our tarball from "CD"
-			einfo "You will need ${TARBALL} from the VMware installation."
-			einfo "Select VM->Install VMware Tools from VMware's menu."
-			cdrom_get_cds ${TARBALL}
-			;;
-	esac
-	# If there is anything to unpack, at all, then we should be using MY_P.
-	if [[ -n "${MY_P}" ]]
-	then
-		if [[ -e "${CDROM_ROOT}"/${MY_P}.tar.gz ]]
-		then
-			tar xzf "${CDROM_ROOT}"/${MY_P}.tar.gz || die
-		else
-			unpack "${MY_P}".tar.gz
-		fi
-
-		if [[ -n "${ANY_ANY}" ]]
-		then
-			unpack "${ANY_ANY}".tar.gz
-			# Move the relevant ANY_ANY files now, so that they can be patched later...
-			mv -f "${ANY_ANY}"/services.sh "${S}"/installer/services.sh
-			# We should be able to get rid of this eventually,
-			# since we'll be using vmware-modules in future...
-			[[ "${product}" == "vmware" ]] && \
-				mv -f "${ANY_ANY}"/*.tar "${S}"/lib/modules/source
-			[[ -e lib/bin/vmware ]] && \
-				chmod 755 lib/bin/vmware
-			[[ -e bin/vmnet-bridge ]] && \
-				chmod 755 bin/vmnet-bridge
-			[[ -e lib/bin/vmware-vmx ]] && \
-				chmod 755 lib/bin/vmware-vmx
-			[[ -e lib/bin-debug/vmware-vmx ]] && \
-				chmod 755 lib/bin-debug/vmware-vmx
-			if [[ "${RUN_UPDATE}" == "yes" ]]
-			then
-				cd "${S}"/"${ANY_ANY}"
-				./update vmware ../lib/bin/vmware || die
-				./update bridge ../bin/vmnet-bridge || die
-				./update vmx ../lib/bin/vmware-vmx || die
-				./update vmxdebug ../lib/bin-debug/vmware-vmx || die
-			fi
-		fi
-
-		# Remove PAX MPROTECT flag from all applicable files in /bin, /sbin for
-		# the vmware package only (since modules, tools and console should not
-		# need to generate code on the fly in memory).
-		[[ "${product}" == "vmware" ]] && pax-mark -m \
-		$(list-paxables ${S}/{bin{,-debug},sbin}/{vmware-serverd,vmware-vmx})
-
-		# Run through any patches that might need to be applied
-		cd "${S}"
-		if [[ -d "${FILESDIR}/${PV}" ]]
-		then
-			EPATCH_SUFFIX="patch"
-			epatch "${FILESDIR}"/${PV}
-		fi
-		if [[ -n "${PATCHES}" ]]
-		then
-			for patch in ${PATCHES}
-			do
-				epatch "${FILESDIR}"/${patch}
-			done
-		fi
-		# Unpack our new libs
-		for a in ${A}
-		do
-			case ${a} in
-				vmware-libssl.so.0.9.7l.tar.bz2)
-					unpack vmware-libssl.so.0.9.7l.tar.bz2
-					;;
-				vmware-libcrypto.so.0.9.7l.tar.bz2)
-					unpack vmware-libcrypto.so.0.9.7l.tar.bz2
-					;;
-			esac
-		done
-	fi
-}
-
-vmware_src_install() {
-	# We won't want any perl scripts from VMware once we've finally got all
-	# of the configuration done, but for now, they're necessary.
-	#rm -f bin/*.pl
-
-	# As backwards as this seems, we're installing our icons first.
-	if [[ -e lib/share/icons/48x48/apps/${PN}.png ]]
-	then
-		doicon lib/share/icons/48x48/apps/${PN}.png
-	elif [[ -e doc/icon48x48.png ]]
-	then
-		newicon doc/icon48x48.png ${PN}.png
-	elif [[ -e "${DISTDIR}/${product}.png" ]]
-	then
-		newicon "${DISTDIR}"/${product}.png ${PN}.png
-	fi
-
-	# Since with Gentoo we compile everthing it doesn't make sense to keep
-	# the precompiled modules arround. Saves about 4 megs of disk space too.
-	rm -rf "${S}"/lib/modules/binary
-	# We also don't need to keep the icons around, or do we?
-	#rm -rf ${S}/lib/share/icons
-
-	# Just like any good monkey, we install the documentation and man pages.
-	[[ -d doc ]] && dodoc doc/*
-	if [[ -d man ]]
-	then
-		cd man
-		for x in *
-		do
-			doman ${x}/* || die "doman"
-		done
-	fi
-	cd "${S}"
-
-	# We remove the shipped libssl for bug #148682
-	if [ -d "${S}"/libssl.so.0.9.7 ]
-	then
-		rm -rf "${S}"/lib/lib/libssl.so.0.9.7
-		# Now, we move in our own
-		cp -pPR "${S}"/libssl.so.0.9.7 "${S}"/lib/lib
-	fi
-	# We remove the shipped libcrypto for bug #148682
-	if [ -d "${S}"/libcrypto.so.0.9.7 ]
-	then
-		rm -rf "${S}"/lib/lib/libcrypto.so.0.9.7
-		# Now, we move in our own
-		cp -pPR "${S}"/libcrypto.so.0.9.7 "${S}"/lib/lib
-	fi
-
-	# We loop through our directories and copy everything to our system.
-	for x in bin lib sbin
-	do
-		if [[ -e "${S}/${x}" ]]
-		then
-			dodir "${VMWARE_INSTALL_DIR}"/${x}
-			cp -pPR "${S}"/${x}/* "${D}""${VMWARE_INSTALL_DIR}"/${x} \
-				|| die "copying ${x}"
-		fi
-	done
-
-	# If we have an /etc directory, we copy it.
-	if [[ -e "${S}/etc" ]]
-	then
-		dodir "${config_dir}"
-		cp -pPR "${S}"/etc/* "${D}""${config_dir}"
-		fowners root:${VMWARE_GROUP} "${config_dir}"
-		fperms 770 "${config_dir}"
-	fi
-
-	# If we have any helper files, we install them.  First, we check for an
-	# init script.
-	if [[ -e "${FILESDIR}/${PN}.rc" ]]
-	then
-		newinitd "${FILESDIR}"/${PN}.rc ${product} || die "newinitd"
-	fi
-	# Then we check for an environment file.
-	if [[ -e "${FILESDIR}/90${PN}" ]]
-	then
-		doenvd "${FILESDIR}"/90${PN} || die "doenvd"
-	fi
-	# Last, we check for any mime files.
-	if [[ -e "${FILESDIR}/${PN}.xml" ]]
-	then
-		insinto /usr/share/mime/packages
-		doins "${FILESDIR}"/${PN}.xml || die "mimetypes"
-	fi
-
-	# Blame bug #91191 for this one.
-	if [[ -e doc/EULA ]]
-	then
-		insinto "${VMWARE_INSTALL_DIR}"/doc
-		doins doc/EULA || die "copying EULA"
-	fi
-
-	# Do we have vmware-ping/vmware-vmx?  If so, make them setuid.
-	for p in /bin/vmware-ping /lib/bin/vmware-vmx /lib/bin-debug/vmware-vmx /lib/bin/vmware-vmx-debug /sbin/vmware-authd;
-	do
-		if [ -x "${D}${VMWARE_INSTALL_DIR}${p}" ]
-		then
-			fowners root:${VMWARE_GROUP} "${VMWARE_INSTALL_DIR}"${p}
-			fperms 4750 "${VMWARE_INSTALL_DIR}"${p}
-		fi
-	done
-
-	# This removed the user/group warnings
-	# But also broke vmware-server with FEATURES="userpriv" since it removes
-	# the set-UID bit
-	#chown -R root:${VMWARE_GROUP} ${D} || die
-
-	# We like desktop icons.
-	# TODO: Fix up the icon creation, across the board.
-	#make_desktop_entry ${PN} "VMware ${FULL_NAME}"
-
-	# We like symlinks for console users.
-	# TODO: Fix up the symlink creation, across the board.
-	# dosym ${VMWARE_INSTALL_DIR}/bin/${PN} /usr/bin/${PN}
-
-	# TODO: Replace this junk
-	# Everything after this point will hopefully go away once we can rid
-	# ourselves of the evil perl configuration scripts.
-
-	if [ "${product}" == "vmware" -o "${product}" == "vmware-tools" ]
-	then
-
-		# We have to create a bunch of rc directories for the init script
-		vmware_create_initd || die "creating rc directories"
-
-		# Now, we copy in our services.sh file
-		exeinto "${config_dir}"/init.d
-		newexe installer/services.sh ${product} || die "services.sh"
-
-		# Set the name
-		dosed "s:%LONGNAME%:Vmware ${FULL_NAME}:" \
-			"${config_dir}"/init.d/${product}
-		[ "${shortname}" == "server" ] && dosed "s:%SHORTNAME%:wgs:" \
-			"${config_dir}"/init.d/${product}
-	fi
-
-	# Finally, we run the "questions"
-	vmware_run_questions || die "running questions"
-}
-
-vmware_pkg_preinst() {
-	# This is run here due to bug #143150
-	[ -z "${product}" ] && vmware_determine_product
-
-	# This must be done after the install to get the mtimes on each file
-	# right.
-
-	#Note: it's a bit weird to use ${D} in a preinst script but it should work
-	#(drobbins, 1 Feb 2002)
-
-	einfo "Generating ${config_dir}/locations file."
-	d=`echo ${D} | wc -c`
-	for x in `find ${D}${VMWARE_INSTALL_DIR} ${D}${config_dir}` ; do
-		x="`echo ${x} | cut -c ${d}-`"
-		if [ -d "${D}/${x}" ] ; then
-			echo "directory ${x}" >> "${D}${config_dir}"/locations
-		else
-			echo -n "file ${x}" >> "${D}${config_dir}"/locations
-			if [ "${x}" == "${config_dir}/locations" ] ; then
-				echo "" >> "${D}${config_dir}"/locations
-			elif [ "${x}" == "${config_dir}/not_configured" ] ; then
-				echo "" >> "${D}${config_dir}"/locations
-			else
-				echo -n " " >> "${D}${config_dir}"/locations
-				find ${D}${x} -printf %T@ >> "${D}${config_dir}"/locations
-				echo "" >> "${D}${config_dir}"/locations
-			fi
-		fi
-	done
-}
-
-vmware_pkg_postinst() {
-	update-mime-database /usr/share/mime
-	[[ -d "${config_dir}" ]] && chown -R root:${VMWARE_GROUP} ${config_dir}
-
-	# This is to fix the problem where the not_configured file doesn't get
-	# removed when the configuration is run. This doesn't remove the file
-	# It just tells the vmware-config.pl script it can delete it.
-	einfo "Updating ${config_dir}/locations"
-	for x in "${config_dir}"/._cfg????_locations ; do
-		if [ -f $x ] ; then
-			cat $x >> "${config_dir}"/locations
-			rm $x
-		fi
-	done
-
-	echo
-	elog "You need to run "
-	elog "    ${VMWARE_INSTALL_DIR}/bin/${config_program}"
-	elog "to complete the install."
-	echo
-	einfo "For VMware Add-Ons just visit"
-	einfo "http://www.vmware.com/download/downloadaddons.html"
-	echo
-	if [ "${PN}" == "vmware-player" ]
-	then
-		elog "After configuring, run vmplayer to launch"
-	else
-		elog "After configuring, run ${PN} to launch"
-	fi
-	echo
-	if [ "${product}" == "vmware" -o "${product}" == "vmware-tools" ]
-	then
-		elog "Also note that when you reboot you should run:"
-		elog "    /etc/init.d/${product} start"
-		elog "before trying to run ${product}.  Or you could just add it to"
-		elog "the default runlevel:"
-		elog "    rc-update add ${product} default"
-		echo
-		ewarn "VMWare allows for the potential of overwriting files as root.  Only"
-		ewarn "give VMWare access to trusted individuals."
-		echo
-	fi
-	ewarn "Remember, in order to run VMware ${FULL_NAME}, you have to"
-	ewarn "be in the '${VMWARE_GROUP}' group."
-	echo
-}
-
-vmware_pkg_postrm() {
-	[ -z "${product}" ] && vmware_determine_product
-	local product_extras
-	if [ "${product}" == "vmware" ]
-	then
-		product_extras=" and /etc/init.d/${product}"
-	fi
-	if ! has_version app-emulation/${PN}; then
-		echo
-		elog "To remove all traces of ${product} you will need to remove the files"
-		elog "in ${config_dir}${product_extras}."
-		elog "If the vmware-modules package is installed, you may no longer need it."
-		echo
-	fi
-}