Bump/patch for security bug #466222.

(Portage version: 2.1.11.55/cvs/Linux x86_64, unsigned Manifest commit)

9 files changed, 1601 insertions, 1 deletions

diff --git a/x11-base/xorg-server/ChangeLog b/x11-base/xorg-server/ChangeLog
index 0cfdc2944c06..b47abe6895e9 100644
--- a/x11-base/xorg-server/ChangeLog
+++ b/x11-base/xorg-server/ChangeLog
@@ -1,6 +1,21 @@
 # ChangeLog for x11-base/xorg-server
 # Copyright 1999-2013 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-server/ChangeLog,v 1.729 2013/03/08 11:00:30 chithanh Exp $
+# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-server/ChangeLog,v 1.730 2013/04/17 22:47:56 chithanh Exp $
+
+*xorg-server-1.10.6-r2 (17 Apr 2013)
+*xorg-server-1.14.1 (17 Apr 2013)
+*xorg-server-1.13.4 (17 Apr 2013)
+*xorg-server-1.11.4-r2 (17 Apr 2013)
+*xorg-server-1.9.5-r2 (17 Apr 2013)
+*xorg-server-1.12.4-r1 (17 Apr 2013)
+
+  17 Apr 2013; Chí-Thanh Christopher Nguyễn <chithanh@gentoo.org>
+  +files/xorg-server-1.12-cve-2013-1940.patch,
+  +files/xorg-server-1.9-cve-2013-1940.patch, +xorg-server-1.10.6-r2.ebuild,
+  +xorg-server-1.11.4-r2.ebuild, +xorg-server-1.12.4-r1.ebuild,
+  +xorg-server-1.13.4.ebuild, +xorg-server-1.14.1.ebuild,
+  +xorg-server-1.9.5-r2.ebuild:
+  Bump/patch for security bug #466222.
 
 *xorg-server-1.13.3 (08 Mar 2013)
 
diff --git a/x11-base/xorg-server/files/xorg-server-1.12-cve-2013-1940.patch b/x11-base/xorg-server/files/xorg-server-1.12-cve-2013-1940.patch
new file mode 100644
index 000000000000..d85494f90293
--- /dev/null
+++ b/x11-base/xorg-server/files/xorg-server-1.12-cve-2013-1940.patch
@@ -0,0 +1,34 @@
+From 6ca03b9161d33b1d2b55a3a1a913cf88deb2343f Mon Sep 17 00:00:00 2001
+From: Dave Airlie <airlied@gmail.com>
+Date: Wed, 10 Apr 2013 06:09:01 +0000
+Subject: xf86: fix flush input to work with Linux evdev devices.
+
+So when we VT switch back and attempt to flush the input devices,
+we don't succeed because evdev won't return part of an event,
+since we were only asking for 4 bytes, we'd only get -EINVAL back.
+
+This could later cause events to be flushed that we shouldn't have
+gotten.
+
+This is a fix for CVE-2013-1940.
+
+Signed-off-by: Dave Airlie <airlied@redhat.com>
+Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
+Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+---
+diff --git a/hw/xfree86/os-support/shared/posix_tty.c b/hw/xfree86/os-support/shared/posix_tty.c
+index ab3757a..4d08c1e 100644
+--- a/hw/xfree86/os-support/shared/posix_tty.c
++++ b/hw/xfree86/os-support/shared/posix_tty.c
+@@ -421,7 +421,8 @@ xf86FlushInput(int fd)
+ {
+     fd_set fds;
+     struct timeval timeout;
+-    char c[4];
++    /* this needs to be big enough to flush an evdev event. */
++    char c[256];
+ 
+     DebugF("FlushingSerial\n");
+     if (tcflush(fd, TCIFLUSH) == 0)
+--
+cgit v0.9.0.2-2-gbebe
diff --git a/x11-base/xorg-server/files/xorg-server-1.9-cve-2013-1940.patch b/x11-base/xorg-server/files/xorg-server-1.9-cve-2013-1940.patch
new file mode 100644
index 000000000000..f06b923f3d92
--- /dev/null
+++ b/x11-base/xorg-server/files/xorg-server-1.9-cve-2013-1940.patch
@@ -0,0 +1,31 @@
+From 6ca03b9161d33b1d2b55a3a1a913cf88deb2343f Mon Sep 17 00:00:00 2001
+From: Dave Airlie <airlied@gmail.com>
+Date: Wed, 10 Apr 2013 06:09:01 +0000
+Subject: xf86: fix flush input to work with Linux evdev devices.
+
+So when we VT switch back and attempt to flush the input devices,
+we don't succeed because evdev won't return part of an event,
+since we were only asking for 4 bytes, we'd only get -EINVAL back.
+
+This could later cause events to be flushed that we shouldn't have
+gotten.
+
+This is a fix for CVE-2013-1940.
+
+Signed-off-by: Dave Airlie <airlied@redhat.com>
+Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
+Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
+diff -ur a/hw/xfree86/os-support/shared/posix_tty.c b/hw/xfree86/os-support/shared/posix_tty.c
+--- a/hw/xfree86/os-support/shared/posix_tty.c	2010-06-11 08:10:22.000000000 +0200
++++ b/hw/xfree86/os-support/shared/posix_tty.c	2013-04-17 22:49:20.389795964 +0200
+@@ -460,7 +460,8 @@
+ {
+ 	fd_set fds;
+ 	struct timeval timeout;
+-	char c[4];
++	/* this needs to be big enough to flush an evdev event. */
++	char c[256];
+ 
+ 	DebugF("FlushingSerial\n");
+ 	if (tcflush(fd, TCIFLUSH) == 0)
diff --git a/x11-base/xorg-server/xorg-server-1.10.6-r2.ebuild b/x11-base/xorg-server/xorg-server-1.10.6-r2.ebuild
new file mode 100644
index 000000000000..e88808ca8dc5
--- /dev/null
+++ b/x11-base/xorg-server/xorg-server-1.10.6-r2.ebuild
@@ -0,0 +1,249 @@
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-server/xorg-server-1.10.6-r2.ebuild,v 1.1 2013/04/17 22:47:56 chithanh Exp $
+
+EAPI=5
+
+XORG_DOC=doc
+inherit flag-o-matic xorg-2 multilib versionator
+EGIT_REPO_URI="git://anongit.freedesktop.org/git/xorg/xserver"
+
+DESCRIPTION="X.Org X servers"
+SLOT="0/${PV}"
+KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ~ppc64 ~sh ~sparc ~x86 ~x86-fbsd"
+
+IUSE_SERVERS="dmx kdrive xnest xorg xvfb"
+IUSE="${IUSE_SERVERS} ipv6 minimal nptl tslib +udev"
+
+RDEPEND=">=app-admin/eselect-opengl-1.0.8
+	dev-libs/openssl
+	media-libs/freetype
+	>=x11-apps/iceauth-1.0.2
+	>=x11-apps/rgb-1.0.3
+	>=x11-apps/xauth-1.0.3
+	x11-apps/xkbcomp
+	>=x11-libs/libpciaccess-0.10.3
+	>=x11-libs/libXau-1.0.4
+	>=x11-libs/libXdmcp-1.0.2
+	>=x11-libs/libXfont-1.4.2
+	>=x11-libs/libxkbfile-1.0.4
+	>=x11-libs/pixman-0.21.8
+	>=x11-libs/xtrans-1.2.2
+	>=x11-misc/xbitmaps-1.0.1
+	>=x11-misc/xkeyboard-config-1.4
+	dmx? (
+		x11-libs/libXt
+		>=x11-libs/libdmx-1.0.99.1
+		>=x11-libs/libX11-1.1.5
+		>=x11-libs/libXaw-1.0.4
+		>=x11-libs/libXext-1.0.99.4
+		>=x11-libs/libXfixes-4.0.3
+		>=x11-libs/libXi-1.2.99.1
+		>=x11-libs/libXmu-1.0.3
+		>=x11-libs/libXres-1.0.3
+		>=x11-libs/libXtst-1.0.99.2
+	)
+	kdrive? (
+		>=x11-libs/libXext-1.0.5
+		x11-libs/libXv
+	)
+	!minimal? (
+		>=x11-libs/libX11-1.1.5
+		>=x11-libs/libXext-1.0.5
+		>=media-libs/mesa-7.8_rc[nptl=]
+	)
+	tslib? ( >=x11-libs/tslib-1.0 x11-proto/xcalibrateproto )
+	udev? ( >=virtual/udev-150 )
+	>=x11-apps/xinit-1.3"
+
+# dmx+doc DEPEND is a hack, a proper solution needs to be implemented in the
+# xorg-2.eclass for next release
+DEPEND="${RDEPEND}
+	sys-devel/flex
+	>=x11-proto/bigreqsproto-1.1.0
+	>=x11-proto/compositeproto-0.4
+	>=x11-proto/damageproto-1.1
+	>=x11-proto/fixesproto-4.1
+	>=x11-proto/fontsproto-2.0.2
+	>=x11-proto/glproto-1.4.11
+	>=x11-proto/inputproto-1.9.99.902
+	>=x11-proto/kbproto-1.0.3
+	>=x11-proto/randrproto-1.2.99.3
+	>=x11-proto/recordproto-1.13.99.1
+	>=x11-proto/renderproto-0.11
+	>=x11-proto/resourceproto-1.0.2
+	>=x11-proto/scrnsaverproto-1.1
+	>=x11-proto/trapproto-3.4.3
+	>=x11-proto/videoproto-2.2.2
+	>=x11-proto/xcmiscproto-1.2.0
+	>=x11-proto/xextproto-7.1.99
+	>=x11-proto/xf86dgaproto-2.0.99.1
+	>=x11-proto/xf86rushproto-1.1.2
+	>=x11-proto/xf86vidmodeproto-2.2.99.1
+	>=x11-proto/xineramaproto-1.1.3
+	>=x11-proto/xproto-7.0.17
+	dmx? (
+		>=x11-proto/dmxproto-2.2.99.1
+		doc? (
+			|| (
+				www-client/links
+				www-client/lynx
+				www-client/w3m
+			)
+		)
+	)
+	!minimal? (
+		>=x11-proto/xf86driproto-2.1.0
+		>=x11-proto/dri2proto-2.3
+		>=x11-libs/libdrm-2.4.20
+	)"
+
+PDEPEND="
+	xorg? ( >=x11-base/xorg-drivers-$(get_version_component_range 1-2) )"
+
+REQUIRED_USE="!minimal? (
+		|| ( ${IUSE_SERVERS} )
+	)"
+
+#UPSTREAMED_PATCHES=(
+#	"${WORKDIR}/patches/"
+#)
+
+PATCHES=(
+	"${UPSTREAMED_PATCHES[@]}"
+	"${FILESDIR}"/${PN}-disable-acpi.patch
+	"${FILESDIR}"/${PN}-1.9-nouveau-default.patch
+	"${FILESDIR}"/${PN}-1.11-log-format-fix.patch
+	"${FILESDIR}"/${PN}-1.9-cve-2013-1940.patch
+)
+
+pkg_pretend() {
+	# older gcc is not supported
+	[[ $(gcc-major-version) -lt 4 ]] && \
+		die "Sorry, but gcc earlier than 4.0 wont work for xorg-server."
+}
+
+pkg_setup() {
+	xorg-2_pkg_setup
+
+	# localstatedir is used for the log location; we need to override the default
+	#	from ebuild.sh
+	# sysconfdir is used for the xorg.conf location; same applies
+	#	--enable-install-setuid needed because sparcs default off
+	# NOTE: fop is used for doc generating ; and i have no idea if gentoo
+	#	package it somewhere
+	XORG_CONFIGURE_OPTIONS=(
+		$(use_enable ipv6)
+		$(use_enable dmx)
+		$(use_enable kdrive)
+		$(use_enable kdrive kdrive-kbd)
+		$(use_enable kdrive kdrive-mouse)
+		$(use_enable kdrive kdrive-evdev)
+		$(use_enable tslib)
+		$(use_enable tslib xcalibrate)
+		$(use_enable !minimal record)
+		$(use_enable !minimal xfree86-utils)
+		$(use_enable !minimal install-libxf86config)
+		$(use_enable !minimal dri)
+		$(use_enable !minimal dri2)
+		$(use_enable !minimal glx)
+		$(use_enable xnest)
+		$(use_enable xorg)
+		$(use_enable xvfb)
+		$(use_enable nptl glx-tls)
+		$(use_enable udev config-udev)
+		$(use_with doc doxygen)
+		$(use_with doc xmlto)
+		--sysconfdir=/etc/X11
+		--localstatedir=/var
+		--enable-install-setuid
+		--with-fontrootdir=/usr/share/fonts
+		--with-xkb-output=/var/lib/xkb
+		--disable-config-hal
+		--without-dtrace
+		--without-fop
+		--with-os-vendor=Gentoo
+	)
+
+	# Xorg-server requires includes from OS mesa which are not visible for
+	# users of binary drivers.
+	mkdir -p "${T}/mesa-symlinks/GL"
+	for i in gl glx glxmd glxproto glxtokens; do
+		ln -s "${EROOT}usr/$(get_libdir)/opengl/xorg-x11/include/$i.h" "${T}/mesa-symlinks/GL/$i.h" || die
+	done
+	for i in glext glxext; do
+		ln -s "${EROOT}usr/$(get_libdir)/opengl/global/include/$i.h" "${T}/mesa-symlinks/GL/$i.h" || die
+	done
+	append-cppflags "-I${T}/mesa-symlinks"
+}
+
+src_install() {
+	xorg-2_src_install
+
+	dynamic_libgl_install
+
+	server_based_install
+
+	if ! use minimal &&	use xorg; then
+		# Install xorg.conf.example into docs
+		dodoc "${AUTOTOOLS_BUILD_DIR}"/hw/xfree86/xorg.conf.example
+	fi
+
+	newinitd "${FILESDIR}"/xdm-setup.initd-1 xdm-setup
+	newinitd "${FILESDIR}"/xdm.initd-9 xdm
+	newconfd "${FILESDIR}"/xdm.confd-4 xdm
+
+	# install the @x11-module-rebuild set for Portage
+	insinto /usr/share/portage/config/sets
+	newins "${FILESDIR}"/xorg-sets.conf xorg.conf
+}
+
+pkg_postinst() {
+	# sets up libGL and DRI2 symlinks if needed (ie, on a fresh install)
+	eselect opengl set xorg-x11 --use-old
+
+	if [[ ${PV} != 9999 && $(get_version_component_range 2 ${REPLACING_VERSIONS}) != $(get_version_component_range 2 ${PV}) ]]; then
+		elog "You should consider reading upgrade guide for this release:"
+		elog "	http://www.gentoo.org/proj/en/desktop/x/x11/xorg-server-$(get_version_component_range 1-2)-upgrade-guide.xml"
+		echo
+		ewarn "You must rebuild all drivers if upgrading from <xorg-server-$(get_version_component_range 1-2)"
+		ewarn "because the ABI changed. If you cannot start X because"
+		ewarn "of module version mismatch errors, this is your problem."
+
+		echo
+		ewarn "You can generate a list of all installed packages in the x11-drivers"
+		ewarn "category using this command:"
+		ewarn "	emerge portage-utils; qlist -I -C x11-drivers/"
+		ewarn "or using sets from portage-2.2:"
+		ewarn "	emerge @x11-module-rebuild"
+	fi
+}
+
+pkg_postrm() {
+	# Get rid of module dir to ensure opengl-update works properly
+	if [[ -z ${REPLACED_BY_VERSION} && -e ${ROOT}/usr/$(get_libdir)/xorg/modules ]]; then
+		rm -rf "${ROOT}"/usr/$(get_libdir)/xorg/modules
+	fi
+}
+
+dynamic_libgl_install() {
+	# next section is to setup the dynamic libGL stuff
+	ebegin "Moving GL files for dynamic switching"
+		dodir /usr/$(get_libdir)/opengl/xorg-x11/extensions
+		local x=""
+		for x in "${D}"/usr/$(get_libdir)/xorg/modules/extensions/lib{glx,dri,dri2}*; do
+			if [ -f ${x} -o -L ${x} ]; then
+				mv -f ${x} "${D}"/usr/$(get_libdir)/opengl/xorg-x11/extensions
+			fi
+		done
+	eend 0
+}
+
+server_based_install() {
+	if ! use xorg; then
+		rm "${D}"/usr/share/man/man1/Xserver.1x \
+			"${D}"/usr/$(get_libdir)/xserver/SecurityPolicy \
+			"${D}"/usr/$(get_libdir)/pkgconfig/xorg-server.pc \
+			"${D}"/usr/share/man/man1/Xserver.1x
+	fi
+}
diff --git a/x11-base/xorg-server/xorg-server-1.11.4-r2.ebuild b/x11-base/xorg-server/xorg-server-1.11.4-r2.ebuild
new file mode 100644
index 000000000000..e1f523b33d82
--- /dev/null
+++ b/x11-base/xorg-server/xorg-server-1.11.4-r2.ebuild
@@ -0,0 +1,257 @@
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-server/xorg-server-1.11.4-r2.ebuild,v 1.1 2013/04/17 22:47:56 chithanh Exp $
+
+EAPI=5
+
+XORG_DOC=doc
+XORG_EAUTORECONF=yes
+inherit flag-o-matic xorg-2 multilib versionator
+EGIT_REPO_URI="git://anongit.freedesktop.org/git/xorg/xserver"
+
+DESCRIPTION="X.Org X servers"
+SLOT="0/${PV}"
+KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ~ppc64 ~sh ~sparc ~x86 ~x86-fbsd"
+
+IUSE_SERVERS="dmx kdrive xnest xorg xvfb"
+IUSE="${IUSE_SERVERS} ipv6 minimal nptl selinux tslib +udev"
+
+RDEPEND=">=app-admin/eselect-opengl-1.0.8
+	dev-libs/openssl
+	media-libs/freetype
+	>=x11-apps/iceauth-1.0.2
+	>=x11-apps/rgb-1.0.3
+	>=x11-apps/xauth-1.0.3
+	x11-apps/xkbcomp
+	>=x11-libs/libpciaccess-0.10.3
+	>=x11-libs/libXau-1.0.4
+	>=x11-libs/libXdmcp-1.0.2
+	>=x11-libs/libXfont-1.4.2
+	>=x11-libs/libxkbfile-1.0.4
+	>=x11-libs/pixman-0.21.8
+	>=x11-libs/xtrans-1.2.2
+	>=x11-misc/xbitmaps-1.0.1
+	>=x11-misc/xkeyboard-config-2.4.1-r3
+	dmx? (
+		x11-libs/libXt
+		>=x11-libs/libdmx-1.0.99.1
+		>=x11-libs/libX11-1.1.5
+		>=x11-libs/libXaw-1.0.4
+		>=x11-libs/libXext-1.0.99.4
+		>=x11-libs/libXfixes-5.0
+		>=x11-libs/libXi-1.2.99.1
+		>=x11-libs/libXmu-1.0.3
+		x11-libs/libXrender
+		>=x11-libs/libXres-1.0.3
+		>=x11-libs/libXtst-1.0.99.2
+	)
+	kdrive? (
+		>=x11-libs/libXext-1.0.5
+		x11-libs/libXv
+	)
+	!minimal? (
+		>=x11-libs/libX11-1.1.5
+		>=x11-libs/libXext-1.0.5
+		>=media-libs/mesa-7.8_rc[nptl=]
+	)
+	tslib? ( >=x11-libs/tslib-1.0 )
+	udev? ( >=virtual/udev-150 )
+	>=x11-apps/xinit-1.3
+	selinux? ( sec-policy/selinux-xserver )"
+
+DEPEND="${RDEPEND}
+	sys-devel/flex
+	>=x11-proto/bigreqsproto-1.1.0
+	>=x11-proto/compositeproto-0.4
+	>=x11-proto/damageproto-1.1
+	>=x11-proto/fixesproto-5.0
+	>=x11-proto/fontsproto-2.0.2
+	>=x11-proto/glproto-1.4.14
+	>=x11-proto/inputproto-1.9.99.902
+	>=x11-proto/kbproto-1.0.3
+	>=x11-proto/randrproto-1.2.99.3
+	>=x11-proto/recordproto-1.13.99.1
+	>=x11-proto/renderproto-0.11
+	>=x11-proto/resourceproto-1.0.2
+	>=x11-proto/scrnsaverproto-1.1
+	>=x11-proto/trapproto-3.4.3
+	>=x11-proto/videoproto-2.2.2
+	>=x11-proto/xcmiscproto-1.2.0
+	>=x11-proto/xextproto-7.1.99
+	>=x11-proto/xf86dgaproto-2.0.99.1
+	>=x11-proto/xf86rushproto-1.1.2
+	>=x11-proto/xf86vidmodeproto-2.2.99.1
+	>=x11-proto/xineramaproto-1.1.3
+	>=x11-proto/xproto-7.0.22
+	dmx? (
+		>=x11-proto/dmxproto-2.2.99.1
+		doc? (
+			|| (
+				www-client/links
+				www-client/lynx
+				www-client/w3m
+			)
+		)
+	)
+	!minimal? (
+		>=x11-proto/xf86driproto-2.1.0
+		>=x11-proto/dri2proto-2.6
+		>=x11-libs/libdrm-2.4.20
+	)"
+
+PDEPEND="
+	xorg? ( >=x11-base/xorg-drivers-$(get_version_component_range 1-2) )"
+
+REQUIRED_USE="!minimal? (
+		|| ( ${IUSE_SERVERS} )
+	)"
+
+#UPSTREAMED_PATCHES=(
+#	"${WORKDIR}/patches/"
+#)
+
+PATCHES=(
+	"${UPSTREAMED_PATCHES[@]}"
+	"${FILESDIR}"/${PN}-disable-acpi.patch
+	"${FILESDIR}"/${PN}-1.9-nouveau-default.patch
+	"${FILESDIR}"/${PN}-1.11-disable-tests-without-ddx.patch
+	"${FILESDIR}"/${PN}-1.11-dix-pointerrootwin-send-focusin.patch
+	"${FILESDIR}"/${PN}-1.11-dix-send-focus-events.patch
+	"${FILESDIR}"/${PN}-1.11-log-format-fix.patch
+	"${FILESDIR}"/${PN}-1.9-cve-2013-1940.patch
+)
+
+pkg_pretend() {
+	# older gcc is not supported
+	[[ "${MERGE_TYPE}" != "binary" && $(gcc-major-version) -lt 4 ]] && \
+		die "Sorry, but gcc earlier than 4.0 wont work for xorg-server."
+}
+
+pkg_setup() {
+	xorg-2_pkg_setup
+
+	# localstatedir is used for the log location; we need to override the default
+	#	from ebuild.sh
+	# sysconfdir is used for the xorg.conf location; same applies
+	#	--enable-install-setuid needed because sparcs default off
+	# NOTE: fop is used for doc generating ; and i have no idea if gentoo
+	#	package it somewhere
+	XORG_CONFIGURE_OPTIONS=(
+		$(use_enable ipv6)
+		$(use_enable dmx)
+		$(use_enable kdrive)
+		$(use_enable kdrive kdrive-kbd)
+		$(use_enable kdrive kdrive-mouse)
+		$(use_enable kdrive kdrive-evdev)
+		$(use_enable tslib)
+		$(use_enable !minimal record)
+		$(use_enable !minimal xfree86-utils)
+		$(use_enable !minimal install-libxf86config)
+		$(use_enable !minimal dri)
+		$(use_enable !minimal dri2)
+		$(use_enable !minimal glx)
+		$(use_enable xnest)
+		$(use_enable xorg)
+		$(use_enable xvfb)
+		$(use_enable nptl glx-tls)
+		$(use_enable udev config-udev)
+		$(use_with doc doxygen)
+		$(use_with doc xmlto)
+		--sysconfdir=/etc/X11
+		--localstatedir=/var
+		--enable-install-setuid
+		--with-fontrootdir=/usr/share/fonts
+		--with-xkb-output=/var/lib/xkb
+		--disable-config-hal
+		--without-dtrace
+		--without-fop
+		--with-os-vendor=Gentoo
+	)
+
+	# Xorg-server requires includes from OS mesa which are not visible for
+	# users of binary drivers.
+	mkdir -p "${T}/mesa-symlinks/GL"
+	for i in gl glx glxmd glxproto glxtokens; do
+		ln -s "${EROOT}usr/$(get_libdir)/opengl/xorg-x11/include/$i.h" "${T}/mesa-symlinks/GL/$i.h" || die
+	done
+	for i in glext glxext; do
+		ln -s "${EROOT}usr/$(get_libdir)/opengl/global/include/$i.h" "${T}/mesa-symlinks/GL/$i.h" || die
+	done
+	append-cppflags "-I${T}/mesa-symlinks"
+
+	# Make breakage less obvious, bug #402285.
+	replace-flags -O3 -O2
+}
+
+src_install() {
+	xorg-2_src_install
+
+	dynamic_libgl_install
+
+	server_based_install
+
+	if ! use minimal &&	use xorg; then
+		# Install xorg.conf.example into docs
+		dodoc "${AUTOTOOLS_BUILD_DIR}"/hw/xfree86/xorg.conf.example
+	fi
+
+	newinitd "${FILESDIR}"/xdm-setup.initd-1 xdm-setup
+	newinitd "${FILESDIR}"/xdm.initd-9 xdm
+	newconfd "${FILESDIR}"/xdm.confd-4 xdm
+
+	# install the @x11-module-rebuild set for Portage
+	insinto /usr/share/portage/config/sets
+	newins "${FILESDIR}"/xorg-sets.conf xorg.conf
+}
+
+pkg_postinst() {
+	# sets up libGL and DRI2 symlinks if needed (ie, on a fresh install)
+	eselect opengl set xorg-x11 --use-old
+
+	if [[ ${PV} != 9999 && $(get_version_component_range 2 ${REPLACING_VERSIONS}) != $(get_version_component_range 2 ${PV}) ]]; then
+		ewarn "You must rebuild all drivers if upgrading from <xorg-server-$(get_version_component_range 1-2)"
+		ewarn "because the ABI changed. If you cannot start X because"
+		ewarn "of module version mismatch errors, this is your problem."
+
+		echo
+		ewarn "You can generate a list of all installed packages in the x11-drivers"
+		ewarn "category using this command:"
+		ewarn "	emerge portage-utils; qlist -I -C x11-drivers/"
+		ewarn "or using sets from portage-2.2:"
+		ewarn "	emerge @x11-module-rebuild"
+	fi
+
+	if use udev && has_version virtual/udev[-keymap]; then
+		ewarn "virtual/udev was built without keymap support. This may cause input device"
+		ewarn "autoconfiguration to fail."
+	fi
+}
+
+pkg_postrm() {
+	# Get rid of module dir to ensure opengl-update works properly
+	if [[ -z ${REPLACED_BY_VERSION} && -e ${ROOT}/usr/$(get_libdir)/xorg/modules ]]; then
+		rm -rf "${ROOT}"/usr/$(get_libdir)/xorg/modules
+	fi
+}
+
+dynamic_libgl_install() {
+	# next section is to setup the dynamic libGL stuff
+	ebegin "Moving GL files for dynamic switching"
+		dodir /usr/$(get_libdir)/opengl/xorg-x11/extensions
+		local x=""
+		for x in "${D}"/usr/$(get_libdir)/xorg/modules/extensions/lib{glx,dri,dri2}*; do
+			if [ -f ${x} -o -L ${x} ]; then
+				mv -f ${x} "${D}"/usr/$(get_libdir)/opengl/xorg-x11/extensions
+			fi
+		done
+	eend 0
+}
+
+server_based_install() {
+	if ! use xorg; then
+		rm "${D}"/usr/share/man/man1/Xserver.1x \
+			"${D}"/usr/$(get_libdir)/xserver/SecurityPolicy \
+			"${D}"/usr/$(get_libdir)/pkgconfig/xorg-server.pc \
+			"${D}"/usr/share/man/man1/Xserver.1x
+	fi
+}
diff --git a/x11-base/xorg-server/xorg-server-1.12.4-r1.ebuild b/x11-base/xorg-server/xorg-server-1.12.4-r1.ebuild
new file mode 100644
index 000000000000..07309aeb3031
--- /dev/null
+++ b/x11-base/xorg-server/xorg-server-1.12.4-r1.ebuild
@@ -0,0 +1,248 @@
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-server/xorg-server-1.12.4-r1.ebuild,v 1.1 2013/04/17 22:47:56 chithanh Exp $
+
+EAPI=5
+
+XORG_DOC=doc
+inherit xorg-2 multilib versionator flag-o-matic
+EGIT_REPO_URI="git://anongit.freedesktop.org/git/xorg/xserver"
+
+DESCRIPTION="X.Org X servers"
+SLOT="0/${PV}"
+KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ~ppc64 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+
+IUSE_SERVERS="dmx kdrive xnest xorg xvfb"
+IUSE="${IUSE_SERVERS} ipv6 minimal nptl selinux tslib +udev"
+
+RDEPEND=">=app-admin/eselect-opengl-1.0.8
+	dev-libs/openssl
+	media-libs/freetype
+	>=x11-apps/iceauth-1.0.2
+	>=x11-apps/rgb-1.0.3
+	>=x11-apps/xauth-1.0.3
+	x11-apps/xkbcomp
+	>=x11-libs/libpciaccess-0.12.901
+	>=x11-libs/libXau-1.0.4
+	>=x11-libs/libXdmcp-1.0.2
+	>=x11-libs/libXfont-1.4.2
+	>=x11-libs/libxkbfile-1.0.4
+	>=x11-libs/pixman-0.21.8
+	>=x11-libs/xtrans-1.2.2
+	>=x11-misc/xbitmaps-1.0.1
+	>=x11-misc/xkeyboard-config-2.4.1-r3
+	dmx? (
+		x11-libs/libXt
+		>=x11-libs/libdmx-1.0.99.1
+		>=x11-libs/libX11-1.1.5
+		>=x11-libs/libXaw-1.0.4
+		>=x11-libs/libXext-1.0.99.4
+		>=x11-libs/libXfixes-5.0
+		>=x11-libs/libXi-1.2.99.1
+		>=x11-libs/libXmu-1.0.3
+		x11-libs/libXrender
+		>=x11-libs/libXres-1.0.3
+		>=x11-libs/libXtst-1.0.99.2
+	)
+	kdrive? (
+		>=x11-libs/libXext-1.0.5
+		x11-libs/libXv
+	)
+	!minimal? (
+		>=x11-libs/libX11-1.1.5
+		>=x11-libs/libXext-1.0.5
+		>=media-libs/mesa-7.8_rc[nptl=]
+	)
+	tslib? ( >=x11-libs/tslib-1.0 )
+	udev? ( >=virtual/udev-150 )
+	>=x11-apps/xinit-1.3
+	selinux? ( sec-policy/selinux-xserver )"
+
+DEPEND="${RDEPEND}
+	sys-devel/flex
+	>=x11-proto/bigreqsproto-1.1.0
+	>=x11-proto/compositeproto-0.4
+	>=x11-proto/damageproto-1.1
+	>=x11-proto/fixesproto-5.0
+	>=x11-proto/fontsproto-2.0.2
+	>=x11-proto/glproto-1.4.14
+	>=x11-proto/inputproto-2.1.99.3
+	>=x11-proto/kbproto-1.0.3
+	>=x11-proto/randrproto-1.2.99.3
+	>=x11-proto/recordproto-1.13.99.1
+	>=x11-proto/renderproto-0.11
+	>=x11-proto/resourceproto-1.0.2
+	>=x11-proto/scrnsaverproto-1.1
+	>=x11-proto/trapproto-3.4.3
+	>=x11-proto/videoproto-2.2.2
+	>=x11-proto/xcmiscproto-1.2.0
+	>=x11-proto/xextproto-7.1.99
+	>=x11-proto/xf86dgaproto-2.0.99.1
+	>=x11-proto/xf86rushproto-1.1.2
+	>=x11-proto/xf86vidmodeproto-2.2.99.1
+	>=x11-proto/xineramaproto-1.1.3
+	>=x11-proto/xproto-7.0.22
+	dmx? (
+		>=x11-proto/dmxproto-2.2.99.1
+		doc? (
+			|| (
+				www-client/links
+				www-client/lynx
+				www-client/w3m
+			)
+		)
+	)
+	!minimal? (
+		>=x11-proto/xf86driproto-2.1.0
+		>=x11-proto/dri2proto-2.6
+		>=x11-libs/libdrm-2.4.20
+	)"
+
+PDEPEND="
+	xorg? ( >=x11-base/xorg-drivers-$(get_version_component_range 1-2) )"
+
+REQUIRED_USE="!minimal? (
+		|| ( ${IUSE_SERVERS} )
+	)"
+
+#UPSTREAMED_PATCHES=(
+#	"${WORKDIR}/patches/"
+#)
+
+PATCHES=(
+	"${UPSTREAMED_PATCHES[@]}"
+	"${FILESDIR}"/${PN}-1.12-disable-acpi.patch
+	"${FILESDIR}"/${PN}-1.12-cve-2013-1940.patch
+)
+
+pkg_pretend() {
+	# older gcc is not supported
+	[[ "${MERGE_TYPE}" != "binary" && $(gcc-major-version) -lt 4 ]] && \
+		die "Sorry, but gcc earlier than 4.0 wont work for xorg-server."
+}
+
+src_configure() {
+	# localstatedir is used for the log location; we need to override the default
+	#	from ebuild.sh
+	# sysconfdir is used for the xorg.conf location; same applies
+	#	--enable-install-setuid needed because sparcs default off
+	# NOTE: fop is used for doc generating ; and i have no idea if gentoo
+	#	package it somewhere
+	XORG_CONFIGURE_OPTIONS=(
+		$(use_enable ipv6)
+		$(use_enable dmx)
+		$(use_enable kdrive)
+		$(use_enable kdrive kdrive-kbd)
+		$(use_enable kdrive kdrive-mouse)
+		$(use_enable kdrive kdrive-evdev)
+		$(use_enable tslib)
+		$(use_enable !minimal record)
+		$(use_enable !minimal xfree86-utils)
+		$(use_enable !minimal install-libxf86config)
+		$(use_enable !minimal dri)
+		$(use_enable !minimal dri2)
+		$(use_enable !minimal glx)
+		$(use_enable xnest)
+		$(use_enable xorg)
+		$(use_enable xvfb)
+		$(use_enable nptl glx-tls)
+		$(use_enable udev config-udev)
+		$(use_with doc doxygen)
+		$(use_with doc xmlto)
+		--sysconfdir=/etc/X11
+		--localstatedir=/var
+		--enable-install-setuid
+		--with-fontrootdir=/usr/share/fonts
+		--with-xkb-output=/var/lib/xkb
+		--disable-config-hal
+		--without-dtrace
+		--without-fop
+		--with-os-vendor=Gentoo
+	)
+
+	# Xorg-server requires includes from OS mesa which are not visible for
+	# users of binary drivers.
+	mkdir -p "${T}/mesa-symlinks/GL"
+	for i in gl glx glxmd glxproto glxtokens; do
+		ln -s "${EROOT}usr/$(get_libdir)/opengl/xorg-x11/include/$i.h" "${T}/mesa-symlinks/GL/$i.h" || die
+	done
+	for i in glext glxext; do
+		ln -s "${EROOT}usr/$(get_libdir)/opengl/global/include/$i.h" "${T}/mesa-symlinks/GL/$i.h" || die
+	done
+	append-cppflags "-I${T}/mesa-symlinks"
+
+	xorg-2_src_configure
+}
+
+src_install() {
+	xorg-2_src_install
+
+	dynamic_libgl_install
+
+	server_based_install
+
+	if ! use minimal &&	use xorg; then
+		# Install xorg.conf.example into docs
+		dodoc "${AUTOTOOLS_BUILD_DIR}"/hw/xfree86/xorg.conf.example
+	fi
+
+	newinitd "${FILESDIR}"/xdm-setup.initd-1 xdm-setup
+	newinitd "${FILESDIR}"/xdm.initd-9 xdm
+	newconfd "${FILESDIR}"/xdm.confd-4 xdm
+
+	# install the @x11-module-rebuild set for Portage
+	insinto /usr/share/portage/config/sets
+	newins "${FILESDIR}"/xorg-sets.conf xorg.conf
+}
+
+pkg_postinst() {
+	# sets up libGL and DRI2 symlinks if needed (ie, on a fresh install)
+	eselect opengl set xorg-x11 --use-old
+
+	if [[ ${PV} != 9999 && $(get_version_component_range 2 ${REPLACING_VERSIONS}) != $(get_version_component_range 2 ${PV}) ]]; then
+		ewarn "You must rebuild all drivers if upgrading from <xorg-server-$(get_version_component_range 1-2)"
+		ewarn "because the ABI changed. If you cannot start X because"
+		ewarn "of module version mismatch errors, this is your problem."
+
+		echo
+		ewarn "You can generate a list of all installed packages in the x11-drivers"
+		ewarn "category using this command:"
+		ewarn "	emerge portage-utils; qlist -I -C x11-drivers/"
+		ewarn "or using sets from portage-2.2:"
+		ewarn "	emerge @x11-module-rebuild"
+	fi
+
+	if use udev && has_version virtual/udev[-keymap]; then
+		ewarn "virtual/udev was built without keymap support. This may cause input device"
+		ewarn "autoconfiguration to fail."
+	fi
+}
+
+pkg_postrm() {
+	# Get rid of module dir to ensure opengl-update works properly
+	if [[ -z ${REPLACED_BY_VERSION} && -e ${ROOT}/usr/$(get_libdir)/xorg/modules ]]; then
+		rm -rf "${ROOT}"/usr/$(get_libdir)/xorg/modules
+	fi
+}
+
+dynamic_libgl_install() {
+	# next section is to setup the dynamic libGL stuff
+	ebegin "Moving GL files for dynamic switching"
+		dodir /usr/$(get_libdir)/opengl/xorg-x11/extensions
+		local x=""
+		for x in "${D}"/usr/$(get_libdir)/xorg/modules/extensions/lib{glx,dri,dri2}*; do
+			if [ -f ${x} -o -L ${x} ]; then
+				mv -f ${x} "${D}"/usr/$(get_libdir)/opengl/xorg-x11/extensions
+			fi
+		done
+	eend 0
+}
+
+server_based_install() {
+	if ! use xorg; then
+		rm "${D}"/usr/share/man/man1/Xserver.1x \
+			"${D}"/usr/$(get_libdir)/xserver/SecurityPolicy \
+			"${D}"/usr/$(get_libdir)/pkgconfig/xorg-server.pc \
+			"${D}"/usr/share/man/man1/Xserver.1x
+	fi
+}
diff --git a/x11-base/xorg-server/xorg-server-1.13.4.ebuild b/x11-base/xorg-server/xorg-server-1.13.4.ebuild
new file mode 100644
index 000000000000..3abbc4e43941
--- /dev/null
+++ b/x11-base/xorg-server/xorg-server-1.13.4.ebuild
@@ -0,0 +1,248 @@
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-server/xorg-server-1.13.4.ebuild,v 1.1 2013/04/17 22:47:56 chithanh Exp $
+
+EAPI=5
+
+XORG_DOC=doc
+inherit xorg-2 multilib versionator flag-o-matic
+EGIT_REPO_URI="git://anongit.freedesktop.org/git/xorg/xserver"
+
+DESCRIPTION="X.Org X servers"
+SLOT="0/${PV}"
+KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd ~amd64-linux ~arm-linux ~x86-linux"
+
+IUSE_SERVERS="dmx kdrive xnest xorg xvfb"
+IUSE="${IUSE_SERVERS} ipv6 minimal nptl selinux +suid tslib +udev"
+
+RDEPEND=">=app-admin/eselect-opengl-1.0.8
+	dev-libs/openssl
+	media-libs/freetype
+	>=x11-apps/iceauth-1.0.2
+	>=x11-apps/rgb-1.0.3
+	>=x11-apps/xauth-1.0.3
+	x11-apps/xkbcomp
+	>=x11-libs/libdrm-2.4.20
+	>=x11-libs/libpciaccess-0.12.901
+	>=x11-libs/libXau-1.0.4
+	>=x11-libs/libXdmcp-1.0.2
+	>=x11-libs/libXfont-1.4.2
+	>=x11-libs/libxkbfile-1.0.4
+	>=x11-libs/pixman-0.21.8
+	>=x11-libs/xtrans-1.2.2
+	>=x11-misc/xbitmaps-1.0.1
+	>=x11-misc/xkeyboard-config-2.4.1-r3
+	dmx? (
+		x11-libs/libXt
+		>=x11-libs/libdmx-1.0.99.1
+		>=x11-libs/libX11-1.1.5
+		>=x11-libs/libXaw-1.0.4
+		>=x11-libs/libXext-1.0.99.4
+		>=x11-libs/libXfixes-5.0
+		>=x11-libs/libXi-1.2.99.1
+		>=x11-libs/libXmu-1.0.3
+		x11-libs/libXrender
+		>=x11-libs/libXres-1.0.3
+		>=x11-libs/libXtst-1.0.99.2
+	)
+	kdrive? (
+		>=x11-libs/libXext-1.0.5
+		x11-libs/libXv
+	)
+	!minimal? (
+		>=x11-libs/libX11-1.1.5
+		>=x11-libs/libXext-1.0.5
+		>=media-libs/mesa-8[nptl=]
+	)
+	tslib? ( >=x11-libs/tslib-1.0 )
+	udev? ( >=virtual/udev-150 )
+	>=x11-apps/xinit-1.3
+	selinux? ( sec-policy/selinux-xserver )"
+
+DEPEND="${RDEPEND}
+	sys-devel/flex
+	>=x11-proto/bigreqsproto-1.1.0
+	>=x11-proto/compositeproto-0.4
+	>=x11-proto/damageproto-1.1
+	>=x11-proto/fixesproto-5.0
+	>=x11-proto/fontsproto-2.0.2
+	>=x11-proto/glproto-1.4.16
+	>=x11-proto/inputproto-2.1.99.3
+	>=x11-proto/kbproto-1.0.3
+	>=x11-proto/randrproto-1.4.0
+	>=x11-proto/recordproto-1.13.99.1
+	>=x11-proto/renderproto-0.11
+	>=x11-proto/resourceproto-1.2.0
+	>=x11-proto/scrnsaverproto-1.1
+	>=x11-proto/trapproto-3.4.3
+	>=x11-proto/videoproto-2.2.2
+	>=x11-proto/xcmiscproto-1.2.0
+	>=x11-proto/xextproto-7.1.99
+	>=x11-proto/xf86dgaproto-2.0.99.1
+	>=x11-proto/xf86rushproto-1.1.2
+	>=x11-proto/xf86vidmodeproto-2.2.99.1
+	>=x11-proto/xineramaproto-1.1.3
+	>=x11-proto/xproto-7.0.22
+	dmx? (
+		>=x11-proto/dmxproto-2.2.99.1
+		doc? (
+			|| (
+				www-client/links
+				www-client/lynx
+				www-client/w3m
+			)
+		)
+	)
+	!minimal? (
+		>=x11-proto/xf86driproto-2.1.0
+		>=x11-proto/dri2proto-2.8
+	)"
+
+PDEPEND="
+	xorg? ( >=x11-base/xorg-drivers-$(get_version_component_range 1-2) )"
+
+REQUIRED_USE="!minimal? (
+		|| ( ${IUSE_SERVERS} )
+	)"
+
+#UPSTREAMED_PATCHES=(
+#	"${WORKDIR}/patches/"
+#)
+
+PATCHES=(
+	"${UPSTREAMED_PATCHES[@]}"
+	"${FILESDIR}"/${PN}-1.12-disable-acpi.patch
+	"${FILESDIR}"/${PN}-1.13-ia64-asm.patch
+)
+
+pkg_pretend() {
+	# older gcc is not supported
+	[[ "${MERGE_TYPE}" != "binary" && $(gcc-major-version) -lt 4 ]] && \
+		die "Sorry, but gcc earlier than 4.0 will not work for xorg-server."
+}
+
+src_configure() {
+	# localstatedir is used for the log location; we need to override the default
+	#	from ebuild.sh
+	# sysconfdir is used for the xorg.conf location; same applies
+	# NOTE: fop is used for doc generating ; and i have no idea if gentoo
+	#	package it somewhere
+	XORG_CONFIGURE_OPTIONS=(
+		$(use_enable ipv6)
+		$(use_enable dmx)
+		$(use_enable kdrive)
+		$(use_enable kdrive kdrive-kbd)
+		$(use_enable kdrive kdrive-mouse)
+		$(use_enable kdrive kdrive-evdev)
+		$(use_enable suid install-setuid)
+		$(use_enable tslib)
+		$(use_enable !minimal record)
+		$(use_enable !minimal xfree86-utils)
+		$(use_enable !minimal install-libxf86config)
+		$(use_enable !minimal dri)
+		$(use_enable !minimal dri2)
+		$(use_enable !minimal glx)
+		$(use_enable xnest)
+		$(use_enable xorg)
+		$(use_enable xvfb)
+		$(use_enable nptl glx-tls)
+		$(use_enable udev config-udev)
+		$(use_with doc doxygen)
+		$(use_with doc xmlto)
+		--enable-libdrm
+		--sysconfdir="${EPREFIX}"/etc/X11
+		--localstatedir="${EPREFIX}"/var
+		--with-fontrootdir="${EPREFIX}"/usr/share/fonts
+		--with-xkb-output="${EPREFIX}"/var/lib/xkb
+		--disable-config-hal
+		--without-dtrace
+		--without-fop
+		--with-os-vendor=Gentoo
+	)
+
+	# Xorg-server requires includes from OS mesa which are not visible for
+	# users of binary drivers.
+	mkdir -p "${T}/mesa-symlinks/GL"
+	for i in gl glx glxmd glxproto glxtokens; do
+		ln -s "${EROOT}usr/$(get_libdir)/opengl/xorg-x11/include/$i.h" "${T}/mesa-symlinks/GL/$i.h" || die
+	done
+	for i in glext glxext; do
+		ln -s "${EROOT}usr/$(get_libdir)/opengl/global/include/$i.h" "${T}/mesa-symlinks/GL/$i.h" || die
+	done
+	append-cppflags "-I${T}/mesa-symlinks"
+
+	xorg-2_src_configure
+}
+
+src_install() {
+	xorg-2_src_install
+
+	dynamic_libgl_install
+
+	server_based_install
+
+	if ! use minimal &&	use xorg; then
+		# Install xorg.conf.example into docs
+		dodoc "${AUTOTOOLS_BUILD_DIR}"/hw/xfree86/xorg.conf.example
+	fi
+
+	newinitd "${FILESDIR}"/xdm-setup.initd-1 xdm-setup
+	newinitd "${FILESDIR}"/xdm.initd-9 xdm
+	newconfd "${FILESDIR}"/xdm.confd-4 xdm
+
+	# install the @x11-module-rebuild set for Portage
+	insinto /usr/share/portage/config/sets
+	newins "${FILESDIR}"/xorg-sets.conf xorg.conf
+}
+
+pkg_postinst() {
+	# sets up libGL and DRI2 symlinks if needed (ie, on a fresh install)
+	eselect opengl set xorg-x11 --use-old
+
+	if [[ ${PV} != 9999 && $(get_version_component_range 2 ${REPLACING_VERSIONS}) != $(get_version_component_range 2 ${PV}) ]]; then
+		ewarn "You must rebuild all drivers if upgrading from <xorg-server-$(get_version_component_range 1-2)"
+		ewarn "because the ABI changed. If you cannot start X because"
+		ewarn "of module version mismatch errors, this is your problem."
+
+		echo
+		ewarn "You can generate a list of all installed packages in the x11-drivers"
+		ewarn "category using this command:"
+		ewarn "	emerge portage-utils; qlist -I -C x11-drivers/"
+		ewarn "or using sets from portage-2.2:"
+		ewarn "	emerge @x11-module-rebuild"
+	fi
+
+	if use udev && has_version virtual/udev[-keymap]; then
+		ewarn "virtual/udev was built without keymap support. This may cause input device"
+		ewarn "autoconfiguration to fail."
+	fi
+}
+
+pkg_postrm() {
+	# Get rid of module dir to ensure opengl-update works properly
+	if [[ -z ${REPLACED_BY_VERSION} && -e ${EROOT}/usr/$(get_libdir)/xorg/modules ]]; then
+		rm -rf "${EROOT}"/usr/$(get_libdir)/xorg/modules
+	fi
+}
+
+dynamic_libgl_install() {
+	# next section is to setup the dynamic libGL stuff
+	ebegin "Moving GL files for dynamic switching"
+		dodir /usr/$(get_libdir)/opengl/xorg-x11/extensions
+		local x=""
+		for x in "${ED}"/usr/$(get_libdir)/xorg/modules/extensions/lib{glx,dri,dri2}*; do
+			if [ -f ${x} -o -L ${x} ]; then
+				mv -f ${x} "${ED}"/usr/$(get_libdir)/opengl/xorg-x11/extensions
+			fi
+		done
+	eend 0
+}
+
+server_based_install() {
+	if ! use xorg; then
+		rm "${ED}"/usr/share/man/man1/Xserver.1x \
+			"${ED}"/usr/$(get_libdir)/xserver/SecurityPolicy \
+			"${ED}"/usr/$(get_libdir)/pkgconfig/xorg-server.pc \
+			"${ED}"/usr/share/man/man1/Xserver.1x
+	fi
+}
diff --git a/x11-base/xorg-server/xorg-server-1.14.1.ebuild b/x11-base/xorg-server/xorg-server-1.14.1.ebuild
new file mode 100644
index 000000000000..3eff59213d52
--- /dev/null
+++ b/x11-base/xorg-server/xorg-server-1.14.1.ebuild
@@ -0,0 +1,246 @@
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-server/xorg-server-1.14.1.ebuild,v 1.1 2013/04/17 22:47:56 chithanh Exp $
+
+EAPI=5
+
+XORG_DOC=doc
+XORG_EAUTORECONF=yes
+inherit xorg-2 multilib versionator flag-o-matic
+EGIT_REPO_URI="git://anongit.freedesktop.org/git/xorg/xserver"
+
+DESCRIPTION="X.Org X servers"
+SLOT="0/${PV}"
+KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd ~amd64-linux ~arm-linux ~x86-linux"
+
+IUSE_SERVERS="dmx kdrive xnest xorg xvfb"
+IUSE="${IUSE_SERVERS} ipv6 minimal nptl selinux +suid tslib +udev"
+
+RDEPEND=">=app-admin/eselect-opengl-1.0.8
+	dev-libs/openssl
+	media-libs/freetype
+	>=x11-apps/iceauth-1.0.2
+	>=x11-apps/rgb-1.0.3
+	>=x11-apps/xauth-1.0.3
+	x11-apps/xkbcomp
+	>=x11-libs/libdrm-2.4.20
+	>=x11-libs/libpciaccess-0.12.901
+	>=x11-libs/libXau-1.0.4
+	>=x11-libs/libXdmcp-1.0.2
+	>=x11-libs/libXfont-1.4.2
+	>=x11-libs/libxkbfile-1.0.4
+	>=x11-libs/pixman-0.27.2
+	>=x11-libs/xtrans-1.2.2
+	>=x11-misc/xbitmaps-1.0.1
+	>=x11-misc/xkeyboard-config-2.4.1-r3
+	dmx? (
+		x11-libs/libXt
+		>=x11-libs/libdmx-1.0.99.1
+		>=x11-libs/libX11-1.1.5
+		>=x11-libs/libXaw-1.0.4
+		>=x11-libs/libXext-1.0.99.4
+		>=x11-libs/libXfixes-5.0
+		>=x11-libs/libXi-1.2.99.1
+		>=x11-libs/libXmu-1.0.3
+		x11-libs/libXrender
+		>=x11-libs/libXres-1.0.3
+		>=x11-libs/libXtst-1.0.99.2
+	)
+	kdrive? (
+		>=x11-libs/libXext-1.0.5
+		x11-libs/libXv
+	)
+	!minimal? (
+		>=x11-libs/libX11-1.1.5
+		>=x11-libs/libXext-1.0.5
+		>=media-libs/mesa-8[nptl=]
+	)
+	tslib? ( >=x11-libs/tslib-1.0 )
+	udev? ( >=virtual/udev-150 )
+	>=x11-apps/xinit-1.3
+	selinux? ( sec-policy/selinux-xserver )"
+
+DEPEND="${RDEPEND}
+	sys-devel/flex
+	>=x11-proto/bigreqsproto-1.1.0
+	>=x11-proto/compositeproto-0.4
+	>=x11-proto/damageproto-1.1
+	>=x11-proto/fixesproto-5.0
+	>=x11-proto/fontsproto-2.0.2
+	>=x11-proto/glproto-1.4.16
+	>=x11-proto/inputproto-2.2.99.1
+	>=x11-proto/kbproto-1.0.3
+	>=x11-proto/randrproto-1.4.0
+	>=x11-proto/recordproto-1.13.99.1
+	>=x11-proto/renderproto-0.11
+	>=x11-proto/resourceproto-1.2.0
+	>=x11-proto/scrnsaverproto-1.1
+	>=x11-proto/trapproto-3.4.3
+	>=x11-proto/videoproto-2.2.2
+	>=x11-proto/xcmiscproto-1.2.0
+	>=x11-proto/xextproto-7.1.99
+	>=x11-proto/xf86dgaproto-2.0.99.1
+	>=x11-proto/xf86rushproto-1.1.2
+	>=x11-proto/xf86vidmodeproto-2.2.99.1
+	>=x11-proto/xineramaproto-1.1.3
+	>=x11-proto/xproto-7.0.22
+	dmx? (
+		>=x11-proto/dmxproto-2.2.99.1
+		doc? (
+			|| (
+				www-client/links
+				www-client/lynx
+				www-client/w3m
+			)
+		)
+	)
+	!minimal? (
+		>=x11-proto/xf86driproto-2.1.0
+		>=x11-proto/dri2proto-2.8
+	)"
+
+PDEPEND="
+	xorg? ( >=x11-base/xorg-drivers-$(get_version_component_range 1-2) )"
+
+REQUIRED_USE="!minimal? (
+		|| ( ${IUSE_SERVERS} )
+	)"
+
+#UPSTREAMED_PATCHES=(
+#	"${WORKDIR}/patches/"
+#)
+
+PATCHES=(
+	"${UPSTREAMED_PATCHES[@]}"
+	"${FILESDIR}"/${PN}-1.12-disable-acpi.patch
+)
+
+pkg_pretend() {
+	# older gcc is not supported
+	[[ "${MERGE_TYPE}" != "binary" && $(gcc-major-version) -lt 4 ]] && \
+		die "Sorry, but gcc earlier than 4.0 will not work for xorg-server."
+}
+
+src_configure() {
+	# localstatedir is used for the log location; we need to override the default
+	#	from ebuild.sh
+	# sysconfdir is used for the xorg.conf location; same applies
+	# NOTE: fop is used for doc generating ; and i have no idea if gentoo
+	#	package it somewhere
+	XORG_CONFIGURE_OPTIONS=(
+		$(use_enable ipv6)
+		$(use_enable dmx)
+		$(use_enable kdrive)
+		$(use_enable kdrive kdrive-kbd)
+		$(use_enable kdrive kdrive-mouse)
+		$(use_enable kdrive kdrive-evdev)
+		$(use_enable suid install-setuid)
+		$(use_enable tslib)
+		$(use_enable !minimal record)
+		$(use_enable !minimal xfree86-utils)
+		$(use_enable !minimal install-libxf86config)
+		$(use_enable !minimal dri)
+		$(use_enable !minimal dri2)
+		$(use_enable !minimal glx)
+		$(use_enable xnest)
+		$(use_enable xorg)
+		$(use_enable xvfb)
+		$(use_enable nptl glx-tls)
+		$(use_enable udev config-udev)
+		$(use_with doc doxygen)
+		$(use_with doc xmlto)
+		--enable-libdrm
+		--sysconfdir="${EPREFIX}"/etc/X11
+		--localstatedir="${EPREFIX}"/var
+		--with-fontrootdir="${EPREFIX}"/usr/share/fonts
+		--with-xkb-output="${EPREFIX}"/var/lib/xkb
+		--disable-config-hal
+		--without-dtrace
+		--without-fop
+		--with-os-vendor=Gentoo
+	)
+
+	# Xorg-server requires includes from OS mesa which are not visible for
+	# users of binary drivers.
+	mkdir -p "${T}/mesa-symlinks/GL"
+	for i in gl glx glxmd glxproto glxtokens; do
+		ln -s "${EROOT}usr/$(get_libdir)/opengl/xorg-x11/include/$i.h" "${T}/mesa-symlinks/GL/$i.h" || die
+	done
+	for i in glext glxext; do
+		ln -s "${EROOT}usr/$(get_libdir)/opengl/global/include/$i.h" "${T}/mesa-symlinks/GL/$i.h" || die
+	done
+	append-cppflags "-I${T}/mesa-symlinks"
+
+	xorg-2_src_configure
+}
+
+src_install() {
+	xorg-2_src_install
+
+	dynamic_libgl_install
+
+	server_based_install
+
+	if ! use minimal &&	use xorg; then
+		# Install xorg.conf.example into docs
+		dodoc "${AUTOTOOLS_BUILD_DIR}"/hw/xfree86/xorg.conf.example
+	fi
+
+	newinitd "${FILESDIR}"/xdm-setup.initd-1 xdm-setup
+	newinitd "${FILESDIR}"/xdm.initd-9 xdm
+	newconfd "${FILESDIR}"/xdm.confd-4 xdm
+
+	# install the @x11-module-rebuild set for Portage
+	insinto /usr/share/portage/config/sets
+	newins "${FILESDIR}"/xorg-sets.conf xorg.conf
+}
+
+pkg_postinst() {
+	# sets up libGL and DRI2 symlinks if needed (ie, on a fresh install)
+	eselect opengl set xorg-x11 --use-old
+
+	if [[ ${PV} != 9999 && $(get_version_component_range 2 ${REPLACING_VERSIONS}) != $(get_version_component_range 2 ${PV}) ]]; then
+		ewarn "You must rebuild all drivers if upgrading from <xorg-server-$(get_version_component_range 1-2)"
+		ewarn "because the ABI changed. If you cannot start X because"
+		ewarn "of module version mismatch errors, this is your problem."
+
+		echo
+		ewarn "You can rebuild all installed packages in the x11-drivers"
+		ewarn "category using this command:"
+		ewarn "	emerge @x11-module-rebuild"
+	fi
+
+	if use udev && has_version virtual/udev[-keymap]; then
+		ewarn "virtual/udev was built without keymap support. This may cause input device"
+		ewarn "autoconfiguration to fail."
+	fi
+}
+
+pkg_postrm() {
+	# Get rid of module dir to ensure opengl-update works properly
+	if [[ -z ${REPLACED_BY_VERSION} && -e ${EROOT}/usr/$(get_libdir)/xorg/modules ]]; then
+		rm -rf "${EROOT}"/usr/$(get_libdir)/xorg/modules
+	fi
+}
+
+dynamic_libgl_install() {
+	# next section is to setup the dynamic libGL stuff
+	ebegin "Moving GL files for dynamic switching"
+		dodir /usr/$(get_libdir)/opengl/xorg-x11/extensions
+		local x=""
+		for x in "${ED}"/usr/$(get_libdir)/xorg/modules/extensions/lib{glx,dri,dri2}*; do
+			if [ -f ${x} -o -L ${x} ]; then
+				mv -f ${x} "${ED}"/usr/$(get_libdir)/opengl/xorg-x11/extensions
+			fi
+		done
+	eend 0
+}
+
+server_based_install() {
+	if ! use xorg; then
+		rm "${ED}"/usr/share/man/man1/Xserver.1x \
+			"${ED}"/usr/$(get_libdir)/xserver/SecurityPolicy \
+			"${ED}"/usr/$(get_libdir)/pkgconfig/xorg-server.pc \
+			"${ED}"/usr/share/man/man1/Xserver.1x
+	fi
+}
diff --git a/x11-base/xorg-server/xorg-server-1.9.5-r2.ebuild b/x11-base/xorg-server/xorg-server-1.9.5-r2.ebuild
new file mode 100644
index 000000000000..0de05fee8896
--- /dev/null
+++ b/x11-base/xorg-server/xorg-server-1.9.5-r2.ebuild
@@ -0,0 +1,272 @@
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-server/xorg-server-1.9.5-r2.ebuild,v 1.1 2013/04/17 22:47:56 chithanh Exp $
+
+EAPI=5
+inherit flag-o-matic xorg-2 multilib versionator
+
+EGIT_REPO_URI="git://anongit.freedesktop.org/git/xorg/xserver"
+
+OPENGL_DIR="xorg-x11"
+
+DESCRIPTION="X.Org X servers"
+SLOT="0/${PV}"
+KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ~ppc64 ~sh ~sparc ~x86 ~x86-fbsd"
+
+IUSE_SERVERS="dmx kdrive xnest xorg xvfb"
+IUSE="${IUSE_SERVERS} doc ipv6 minimal nptl tslib +udev"
+RDEPEND=">=app-admin/eselect-opengl-1.0.8
+	dev-libs/openssl
+	media-libs/freetype
+	>=x11-apps/iceauth-1.0.2
+	>=x11-apps/rgb-1.0.3
+	>=x11-apps/xauth-1.0.3
+	x11-apps/xkbcomp
+	>=x11-libs/libpciaccess-0.10.3
+	>=x11-libs/libXau-1.0.4
+	>=x11-libs/libXdmcp-1.0.2
+	>=x11-libs/libXfont-1.4.2
+	>=x11-libs/libxkbfile-1.0.4
+	>=x11-libs/pixman-0.15.20
+	>=x11-libs/xtrans-1.2.2
+	>=x11-misc/xbitmaps-1.0.1
+	>=x11-misc/xkeyboard-config-1.4
+	dmx? (
+		x11-libs/libXt
+		>=x11-libs/libdmx-1.0.99.1
+		>=x11-libs/libX11-1.1.5
+		>=x11-libs/libXaw-1.0.4
+		>=x11-libs/libXext-1.0.5
+		>=x11-libs/libXfixes-4.0.3
+		>=x11-libs/libXi-1.2.99.1
+		>=x11-libs/libXmu-1.0.3
+		>=x11-libs/libXres-1.0.3
+		>=x11-libs/libXtst-1.0.3
+	)
+	kdrive? (
+		>=x11-libs/libXext-1.0.5
+		x11-libs/libXv
+	)
+	!minimal? (
+		>=x11-libs/libX11-1.1.5
+		>=x11-libs/libXext-1.0.5
+		>=media-libs/mesa-7.8_rc[nptl=]
+	)
+	tslib? ( >=x11-libs/tslib-1.0 x11-proto/xcalibrateproto )
+	udev? ( >=virtual/udev-150 )"
+
+DEPEND="${RDEPEND}
+	sys-devel/flex
+	>=x11-proto/bigreqsproto-1.1.0
+	>=x11-proto/compositeproto-0.4
+	>=x11-proto/damageproto-1.1
+	>=x11-proto/fixesproto-4.1
+	>=x11-proto/fontsproto-2.0.2
+	>=x11-proto/glproto-1.4.11
+	>=x11-proto/inputproto-1.9.99.902
+	>=x11-proto/kbproto-1.0.3
+	>=x11-proto/randrproto-1.2.99.3
+	>=x11-proto/recordproto-1.13.99.1
+	>=x11-proto/renderproto-0.11
+	>=x11-proto/resourceproto-1.0.2
+	>=x11-proto/scrnsaverproto-1.1
+	>=x11-proto/trapproto-3.4.3
+	>=x11-proto/videoproto-2.2.2
+	>=x11-proto/xcmiscproto-1.2.0
+	>=x11-proto/xextproto-7.0.99.3
+	>=x11-proto/xf86dgaproto-2.0.99.1
+	>=x11-proto/xf86rushproto-1.1.2
+	>=x11-proto/xf86vidmodeproto-2.2.99.1
+	>=x11-proto/xineramaproto-1.1.3
+	>=x11-proto/xproto-7.0.17
+	dmx? ( >=x11-proto/dmxproto-2.2.99.1 )
+	doc? (
+		>=app-doc/doxygen-1.6.1
+		app-text/xmlto
+	)
+	!minimal? (
+		>=x11-proto/xf86driproto-2.1.0
+		>=x11-proto/dri2proto-2.3
+		>=x11-libs/libdrm-2.4.20
+	)
+	>=x11-apps/xinit-1.3"
+
+PDEPEND="
+	xorg? ( >=x11-base/xorg-drivers-$(get_version_component_range 1-2) )"
+
+EPATCH_FORCE="yes"
+EPATCH_SUFFIX="patch"
+
+# These have been sent upstream
+UPSTREAMED_PATCHES=(
+#	"${WORKDIR}/patches/"
+	)
+
+PATCHES=(
+	"${UPSTREAMED_PATCHES[@]}"
+	"${FILESDIR}"/${PN}-disable-acpi.patch
+	"${FILESDIR}"/${PN}-1.9-nouveau-default.patch
+	"${FILESDIR}"/xorg-cve-2011-4028+4029.patch
+	"${FILESDIR}"/${PN}-1.9-cve-2013-1940.patch
+	)
+
+pkg_setup() {
+	xorg-2_pkg_setup
+
+	use minimal || ensure_a_server_is_building
+
+	# localstatedir is used for the log location; we need to override the default
+	#	from ebuild.sh
+	# sysconfdir is used for the xorg.conf location; same applies
+	#	--enable-install-setuid needed because sparcs default off
+	# NOTE: fop is used for doc generating ; and i have no idea if gentoo
+	#	package it somewhere
+	XORG_CONFIGURE_OPTIONS=(
+		$(use_enable ipv6)
+		$(use_enable dmx)
+		$(use_enable kdrive)
+		$(use_enable kdrive kdrive-kbd)
+		$(use_enable kdrive kdrive-mouse)
+		$(use_enable kdrive kdrive-evdev)
+		$(use_enable tslib)
+		$(use_enable tslib xcalibrate)
+		$(use_enable !minimal record)
+		$(use_enable !minimal xfree86-utils)
+		$(use_enable !minimal install-libxf86config)
+		$(use_enable !minimal dri)
+		$(use_enable !minimal dri2)
+		$(use_enable !minimal glx)
+		$(use_enable xnest)
+		$(use_enable xorg)
+		$(use_enable xvfb)
+		$(use_enable nptl glx-tls)
+		$(use_enable udev config-udev)
+		$(use_with doc doxygen)
+		$(use_with doc xmlto)
+		--sysconfdir=/etc/X11
+		--localstatedir=/var
+		--enable-install-setuid
+		--with-fontrootdir=/usr/share/fonts
+		--with-xkb-output=/var/lib/xkb
+		--disable-config-hal
+		--without-dtrace
+		--without-fop
+		--with-os-vendor=Gentoo
+		${conf_opts}
+	)
+
+	# Xorg-server requires includes from OS mesa which are not visible for
+	# users of binary drivers.
+	# Due to the limitations of CONFIGURE_OPTIONS, we have to export this
+	mkdir -p "${T}/mesa-symlinks/GL"
+	for i in gl glx glxmd glxproto glxtokens; do
+		ln -s "${EROOT}usr/$(get_libdir)/opengl/xorg-x11/include/$i.h" "${T}/mesa-symlinks/GL/$i.h" || die
+	done
+	for i in glext glxext; do
+		ln -s "${EROOT}usr/$(get_libdir)/opengl/global/include/$i.h" "${T}/mesa-symlinks/GL/$i.h" || die
+	done
+	append-cppflags "-I${T}/mesa-symlinks"
+
+	# (#121394) Causes window corruption
+	filter-flags -fweb
+
+	# Incompatible with GCC 3.x SSP on x86, bug #244352
+	if use x86 ; then
+		if [[ $(gcc-major-version) -lt 4 ]]; then
+			filter-flags -fstack-protector
+		fi
+	fi
+
+	# Incompatible with GCC 3.x CPP, bug #314615
+	if [[ $(gcc-major-version) -lt 4 ]]; then
+		ewarn "GCC 3.x C preprocessor may cause build failures. Use GCC 4.x"
+		ewarn "or set CPP=cpp-4.3.4 (replace with the actual installed version)"
+	fi
+
+	# detect if we should inform user about ebuild breakage
+	if ! has_version "x11-base/xorg-server" ||
+			has_version "<x11-base/xorg-server-$(get_version_component_range 1-2)"; then
+		INFO="yes"
+	fi
+}
+
+src_install() {
+	xorg-2_src_install
+
+	dynamic_libgl_install
+
+	server_based_install
+
+	if ! use minimal &&	use xorg; then
+		# Install xorg.conf.example into docs
+		dodoc "${WORKDIR}"/${P}_build/hw/xfree86/xorg.conf.example \
+			|| die "couldn't install xorg.conf.example"
+	fi
+
+	newinitd "${FILESDIR}"/xdm.initd-9 xdm || die "initd file install failed"
+	newinitd "${FILESDIR}"/xdm-setup.initd-1 xdm-setup || die
+	newconfd "${FILESDIR}"/xdm.confd-4 xdm || die
+
+	# install the @x11-module-rebuild set for Portage
+	insinto /usr/share/portage/config/sets
+	newins "${FILESDIR}"/xorg-sets.conf xorg.conf || die
+}
+
+pkg_postinst() {
+	# sets up libGL and DRI2 symlinks if needed (ie, on a fresh install)
+	eselect opengl set --use-old xorg-x11
+
+	if [[ ${INFO} = yes ]]; then
+		elog "You should consider reading upgrade guide for this release:"
+		elog "	http://www.gentoo.org/proj/en/desktop/x/x11/xorg-server-$(get_version_component_range 1-2)-upgrade-guide.xml"
+		echo
+		ewarn "You must rebuild all drivers if upgrading from <xorg-server-$(get_version_component_range 1-2)"
+		ewarn "because the ABI changed. If you cannot start X because"
+		ewarn "of module version mismatch errors, this is your problem."
+
+		echo
+		ewarn "You can generate a list of all installed packages in the x11-drivers"
+		ewarn "category using this command:"
+		ewarn "	emerge portage-utils; qlist -I -C x11-drivers/"
+	fi
+}
+
+pkg_postrm() {
+	# Get rid of module dir to ensure opengl-update works properly
+	if ! has_version x11-base/xorg-server; then
+		if [[ -e ${ROOT}/usr/$(get_libdir)/xorg/modules ]]; then
+			rm -rf "${ROOT}"/usr/$(get_libdir)/xorg/modules
+		fi
+	fi
+}
+
+dynamic_libgl_install() {
+	# next section is to setup the dynamic libGL stuff
+	ebegin "Moving GL files for dynamic switching"
+		dodir /usr/$(get_libdir)/opengl/${OPENGL_DIR}/extensions
+		local x=""
+		for x in "${D}"/usr/$(get_libdir)/xorg/modules/extensions/lib{glx,dri,dri2}*; do
+			if [ -f ${x} -o -L ${x} ]; then
+				mv -f ${x} "${D}"/usr/$(get_libdir)/opengl/${OPENGL_DIR}/extensions
+			fi
+		done
+	eend 0
+}
+
+server_based_install() {
+	if ! use xorg; then
+		rm "${D}"/usr/share/man/man1/Xserver.1x \
+			"${D}"/usr/$(get_libdir)/xserver/SecurityPolicy \
+			"${D}"/usr/$(get_libdir)/pkgconfig/xorg-server.pc \
+			"${D}"/usr/share/man/man1/Xserver.1x
+	fi
+}
+
+ensure_a_server_is_building() {
+	for server in ${IUSE_SERVERS}; do
+		use ${server} && return;
+	done
+	eerror "You need to specify at least one server to build."
+	eerror "Valid servers are: ${IUSE_SERVERS}."
+	die "No servers were specified to build."
+}