diff options
Diffstat (limited to 'net-print')
| -rw-r--r-- | net-print/brother-colorlaser2/Manifest | 2 | ||||
| -rw-r--r-- | net-print/brother-colorlaser2/brother-colorlaser2-1.0.3.ebuild | 107 | ||||
| -rw-r--r-- | net-print/hl4040cnlpr/Manifest | 2 | ||||
| -rw-r--r-- | net-print/hl4040cnlpr/hl4040cnlpr-1.0.3.ebuild | 64 |
4 files changed, 175 insertions, 0 deletions
diff --git a/net-print/brother-colorlaser2/Manifest b/net-print/brother-colorlaser2/Manifest new file mode 100644 index 0000000..694ca59 --- /dev/null +++ b/net-print/brother-colorlaser2/Manifest @@ -0,0 +1,2 @@ +DIST brother-colorlaser2-gpl-src-1.0.3-1.tar.gz 232787 RMD160 e827b234bc80f5903384cd3ce90cf2e16a3549c1 SHA1 cdc7969fa14316a0626e5007a71e1ac98bdbbced SHA256 cbfd5044fd26a797d344e816aeaf65a81457164683b6db743d5fcdb7e9d56580 +EBUILD brother-colorlaser2-1.0.3.ebuild 2844 RMD160 74db5e6aea405cc90200fe29abaf200a229b5485 SHA1 43317a55d83f6dba0aa45104b0af25d0d99188f6 SHA256 58dc66d824105487cb4805ee045538388ade17e3a37b46e768550a5da980676c diff --git a/net-print/brother-colorlaser2/brother-colorlaser2-1.0.3.ebuild b/net-print/brother-colorlaser2/brother-colorlaser2-1.0.3.ebuild new file mode 100644 index 0000000..9e163a8 --- /dev/null +++ b/net-print/brother-colorlaser2/brother-colorlaser2-1.0.3.ebuild @@ -0,0 +1,107 @@ +# Copyright 1999-2011 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: $ + +EAPI=3 + +DESCRIPTION="Cupswrapper driver for Brother HL4040CN" + +HOMEPAGE="http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/index.html" +SRC_URI="http://www.brother.com/pub/bsc/linux/dlf/${PN}-gpl-src-${PV}-1.tar.gz" + +LICENSE="GPL-2" + +SLOT="0" + +KEYWORDS="~x86" + +IUSE="" + +# Build-time dependencies, such as +# ssl? ( >=dev-libs/openssl-0.9.6b ) +# >=dev-lang/perl-5.6.1-r1 +# It is advisable to use the >= syntax show above, to reflect what you +# had installed on your system when you tested the package. Then +# other users hopefully won't be caught without the right version of +# a dependency. +DEPEND="" + +# Run-time dependencies. Must be defined to whatever this depends on to run. +# The below is valid if the same run-time depends are required to compile. +RDEPEND="net-print/cups" + +PDEPEND=">=net-print/hl4040cnlpr-1.0.3 + app-text/a2ps + app-text/psutils" + +# Source directory; the dir where the sources can be found (automatically +# unpacked) inside ${WORKDIR}. The default value for S is ${WORKDIR}/${P} +# If you don't need to change it, leave the S= line out of the ebuild +# to keep it tidy. +S="${WORKDIR}/${PN}-gpl-src-${PV}-1" + +#AVAILABLE_MODELS="dcp9040cn dcp9042cdn dcp9045cdn hl4040cdn hl4040cn hl4040cnj hl4050cdn hl4070cdw mfc9440cn mfc9450cdn mfc9640cw mfc9840cdw" +AVAILABLE_MODELS="hl4040cn" + +src_unpack() { + unpack ${A} + cd ${S} + for f in ${AVAILABLE_MODELS} + do + tar xfz ${f}cupswrapper-${PV}-1.tar.gz + done + echo ${AVAILABLE_MODELS}| ( read d + mv ${d}cupswrapper-${PV}-1/brcupsconfig . || die "cupswrapper not found" ) + mkdir ${WORKDIR}/tmp +} + +src_configure() { +# Don't do anything + : +} + +src_compile() { + #Compile the config app + gcc ${CFLAGS} -o brcupsconfig2 brcupsconfig/brcupsconfig.c || die "Compilation failed" + + + #Create the filters + for m in ${AVAILABLE_MODELS} + do + SETUP=${m}cupswrapper-${PV}-1/cupswrapper/cupswrapperSetup_${m} + ppd_file_name=/usr/share/cups/model/br${m}.ppd + + SETUP2=brlpdwrapper${m} + SETUP3=brlpdwrapper${m}.tmp + + echo "cat <<MYEOF >$SETUP2" > $SETUP3 + grep -n ENDOFWFILTER $SETUP |cut -d ":" -f 1 | ( + read begin + read end + let end=end-1 + let begin=begin+1 + head -n $end $SETUP | tail -n +$begin \ + | sed -e "s,\${printer_model},$m,g" \ + -e "s,/usr/local/Brother,/usr/lib/Brother," >>$SETUP3 \ + || die "Creating filter failed" + ) || die "Creating filter failed" + echo "MYEOF" >>$SETUP3 + . $SETUP3 + + chmod a+x ${SETUP2} + + done +} + +src_install() { + dobin brcupsconfig2 || die "Install failed" + + for m in ${AVAILABLE_MODELS} + do + insinto /usr/share/cups/model/ + doins ${m}cupswrapper-${PV}-1/PPD/br${m}.ppd || die "Install failed" + + exeinto /usr/libexec/cups/filter/ + doexe brlpdwrapper${m} || die "Install failed" + done +} diff --git a/net-print/hl4040cnlpr/Manifest b/net-print/hl4040cnlpr/Manifest new file mode 100644 index 0000000..554d2bb --- /dev/null +++ b/net-print/hl4040cnlpr/Manifest @@ -0,0 +1,2 @@ +DIST hl4040cnlpr-1.0.3-1.i386.rpm 341331 RMD160 9c42f3c6d8cbe517f4d7bf45452508a5b51f02e7 SHA1 e91e67e4b1691f2663c7513dc336d967a7f064ac SHA256 f39350eb1002e2c65e7302adaf627af99c644fd58b8a8daa70aaf28f9672d67a +EBUILD hl4040cnlpr-1.0.3.ebuild 2124 RMD160 6b2c4ae63e3768a272fb3b6f4dec90b67457ec3e SHA1 fe224f2e3da16495a6038ca8d642d4927b70f3ee SHA256 1fe63ea2c6cdafdd07e2852f1808aa284ca0db93050437722cdee495fb826275 diff --git a/net-print/hl4040cnlpr/hl4040cnlpr-1.0.3.ebuild b/net-print/hl4040cnlpr/hl4040cnlpr-1.0.3.ebuild new file mode 100644 index 0000000..6c152f0 --- /dev/null +++ b/net-print/hl4040cnlpr/hl4040cnlpr-1.0.3.ebuild @@ -0,0 +1,64 @@ +# Copyright 1999-2011 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: $ + +EAPI=3 + +inherit rpm + +DESCRIPTION="Cupswrapper driver for Brother HL4040CN" + +HOMEPAGE="http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/index.html" +SRC_URI="http://www.brother.com/pub/bsc/linux/dlf/${P}-1.i386.rpm" + +LICENSE="as-is" + +SLOT="0" + +KEYWORDS="~x86" + +IUSE="" + +# Build-time dependencies, such as +# ssl? ( >=dev-libs/openssl-0.9.6b ) +# >=dev-lang/perl-5.6.1-r1 +# It is advisable to use the >= syntax show above, to reflect what you +# had installed on your system when you tested the package. Then +# other users hopefully won't be caught without the right version of +# a dependency. + +# Run-time dependencies. Must be defined to whatever this depends on to run. +# The below is valid if the same run-time depends are required to compile. +RDEPEND="net-print/cups" + +# Source directory; the dir where the sources can be found (automatically +# unpacked) inside ${WORKDIR}. The default value for S is ${WORKDIR}/${P} +# If you don't need to change it, leave the S= line out of the ebuild +# to keep it tidy. +S="${WORKDIR}/${P}-1" + +#AVAILABLE_MODELS="dcp9040cn dcp9042cdn dcp9045cdn hl4040cdn hl4040cn hl4040cnj +#hl4050cdn hl4070cdw mfc9440cn mfc9450cdn mfc9640cw mfc9840cdw" + +src_configure() { +# Don't do anything + sed -i -b -e "s,/usr/local/\(Brother[^\x00]*\),/usr/lib/\1\x00\x00,g" \ + usr/bin/brprintconf_hl4040cn ||die "Relocate resource dir" + sed -i -b -e "s,/usr/local/Brother,/usr/lib/Brother,g" usr/local/Brother/Printer/hl4040cn/inf/setupPrintcapij + sed -i -b -e "s,/usr/local/Brother,/usr/lib/Brother,g" usr/local/Brother/Printer/hl4040cn/lpd/filterhl4040cn +} + +src_compile() { + #Compile the config app + : +} + +src_install() { + dobin usr/bin/brprintconf_hl4040cn ||die "Binary not found" + + insinto /usr/lib/Brother/Printer/hl4040cn + doins -r usr/local/Brother/Printer/hl4040cn/inf ||die "data not found" + + exeinto /usr/lib/Brother/Printer/hl4040cn/lpd + doexe usr/local/Brother/Printer/hl4040cn/lpd/{brhl4040cnfilter,psconvertij2,filterhl4040cn} ||die "Executables not found" +} |