dev-db/mysql-connector-c++: remove unused patch

Closes: https://github.com/gentoo/gentoo/pull/22344
Package-Manager: Portage-3.0.23, Repoman-3.0.3
Signed-off-by: Michael Mair-Keimberger <mmk@levelnine.at>
Signed-off-by: Conrad Kostecki <conikost@gentoo.org>

1 files changed, 0 insertions, 307 deletions

diff --git a/dev-db/mysql-connector-c++/files/mysql-connector-c++-8.0.19-fix-build.patch b/dev-db/mysql-connector-c++/files/mysql-connector-c++-8.0.19-fix-build.patch
deleted file mode 100644
index b8976199afc5..000000000000
--- a/dev-db/mysql-connector-c++/files/mysql-connector-c++-8.0.19-fix-build.patch
+++ /dev/null
@@ -1,307 +0,0 @@
---- a/CMakeLists.txt
-+++ b/CMakeLists.txt
-@@ -475,7 +475,7 @@ set_target_properties(connector PROPERTIES
- 
- 
- install(TARGETS connector
--  CONFIGURATIONS Release RelWithDebInfo
-+  CONFIGURATIONS Release RelWithDebInfo Gentoo
-   ARCHIVE DESTINATION "${INSTALL_LIB_DIR_STATIC}" COMPONENT XDevAPIDev
-   RUNTIME DESTINATION "${INSTALL_LIB_DIR}" COMPONENT XDevAPIDll
-   LIBRARY DESTINATION "${INSTALL_LIB_DIR}" COMPONENT XDevAPIDll
---- a/cdk/cmake/DepFindProtobuf.cmake
-+++ b/cdk/cmake/DepFindProtobuf.cmake
-@@ -48,229 +48,7 @@ if(TARGET Protobuf::pb)
-   return()
- endif()
- 
--message(STATUS "Setting up Protobuf.")
--
--set(PB_SOURCE_DIR "${PROJECT_SOURCE_DIR}/protobuf")
--set(PB_BINARY_DIR "${PROJECT_BINARY_DIR}/protobuf")
--set(config_stamp "${PB_BINARY_DIR}/config.stamp")
--set(build_stamp "${PB_BINARY_DIR}/build.stamp")
--
--
--#
--# Pick build configuration for the protobuf build. Normally we build using the
--# same build configuration that is used for building CDK (Release/Debug/etc.).
--# But we also support building CDK under non-standard build configuration
--# named 'Static' (this is a dirty trick we use to simplify building our MSIs).
--# Since protobuf does not know 'Static' build configuration, we build protobuf
--# under 'Release' configuration in that case.
--#
--# We need to handle two cases. For some build systems, like Makefiles,
--# the build configuration is specified at cmake time using CMAKE_BUILD_TYPE
--# variable. In that case we also set it during protobuf build configuration.
--# Another case is a multi-configuration build system like MSVC. In this case
--# we use generator expression to pick correct  configuration when the build
--# command is invoked below.
--#
--
--set(build_type)
--if(CMAKE_BUILD_TYPE)
--  if(CMAKE_BUILD_TYPE MATCHES "[Ss][Tt][Aa][Tt][Ii][Cc]")
--    set(set_build_type -DCMAKE_BUILD_TYPE=Release)
--  else()
--    set(set_build_type -DCMAKE_BUILD_TYPE=${CMAKE_BUILD_TYPE})
--  endif()
--endif()
--
--set(CONFIG_EXPR
--  $<$<CONFIG:Static>:Release>$<$<NOT:$<CONFIG:Static>>:$<CONFIG>>
--)
--
--set(set_arch)
--if(CMAKE_GENERATOR_PLATFORM)
--  set(set_arch -A ${CMAKE_GENERATOR_PLATFORM})
--endif()
--
--set(set_toolset)
--if(CMAKE_GENERATOR_TOOLSET)
--  set(set_toolset -T ${CMAKE_GENERATOR_TOOLSET})
--endif()
--
--if(NOT EXISTS "${PB_BINARY_DIR}/exports.cmake")
--
--  message("==== Configuring Protobuf build using cmake generator: ${CMAKE_GENERATOR} ${set_arch} ${set_toolset}")
--
--  file(REMOVE "${PB_BINARY_DIR}/CMakeCache.txt")
--  file(MAKE_DIRECTORY "${PB_BINARY_DIR}")
--
--  # Dirty trick to speed up cmake set up time.
--  #file(
--  #  COPY "${CMAKE_BINARY_DIR}/CMakeFiles/${CMAKE_VERSION}"
--  #  DESTINATION "${PB_BINARY_DIR}/CMakeFiles"
--  #)
--
--  execute_process(
--    COMMAND ${CMAKE_COMMAND}
--      -G "${CMAKE_GENERATOR}"
--      ${set_arch}
--      ${set_toolset}
--      ${set_build_type}
--      -DSTATIC_MSVCRT=${STATIC_MSVCRT}
--      -DCMAKE_POSITION_INDEPENDENT_CODE=${CMAKE_POSITION_INDEPENDENT_CODE}
--      -DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER}
--      -DCMAKE_CXX_FLAGS=${CMAKE_CXX_FLAGS}
--      -DCMAKE_CXX_FLAGS_DEBUG=${CMAKE_CXX_FLAGS_DEBUG}
--      -DCMAKE_CXX_FLAGS_RELEASE=${CMAKE_CXX_FLAGS_RELEASE}
--      -DCMAKE_CXX_FLAGS_RELWITHDEBINFO=${CMAKE_CXX_FLAGS_RELWITHDEBINFO}
--      -DCMAKE_CXX_FLAGS_MINSIZEREL=${CMAKE_CXX_FLAGS_MINSIZEREL}
--      -DCMAKE_STATIC_LINKER_FLAGS=${CMAKE_STATIC_LINKER_FLAGS}
--      ${PB_SOURCE_DIR}
--    WORKING_DIRECTORY ${PB_BINARY_DIR}
--    RESULT_VARIABLE protobuf_config
--  )
--
--  if(protobuf_config)
--    message(FATAL_ERROR "Could not configure Protobuf build: ${protobuf_config}")
--  endif()
--
--  message("==== Protobuf build configured.")
--
--endif()
--
--
--include(${PB_BINARY_DIR}/exports.cmake)
--
--#
--# Protobuf library targets imported above (pb_protobuf
--# and pb_protobuf-lite) are local to the directory from which
--# they were imported. This is not good if cdk is used as
--# a sub-project of a parent project, because the parent project
--# must have access to these targets.
--#
--# For that reason below we create global protobuf/protobuf-lite targets
--# and copy their locations from the imported targets.
--#
--# Note: we can't use ALIAS library because it does not work with imported
--# targets
--#
--
--add_library(Protobuf::pb-full STATIC IMPORTED GLOBAL)
--add_library(Protobuf::pb-lite STATIC IMPORTED GLOBAL)
--add_executable(Protobuf::protoc IMPORTED GLOBAL)
--
--set(TGT_protobuf Protobuf::pb-full)
--set(TGT_protobuf-lite Protobuf::pb-lite)
--set(TGT_protoc Protobuf::protoc)
--
--foreach(tgt protobuf protobuf-lite protoc)
--
--  #message("processing: ${tgt}")
--
--  set(loc_list)
--
--  foreach(CONF NOCONFIG DEBUG RELEASE MINSIZEREL RELWITHDEBINFO)
--
--    #message("- CONF: ${CONF}")
--
--    get_target_property(LOC pb_${tgt} IMPORTED_LOCATION_${CONF})
--
--    if(LOC)
--
--      #message("- setting imported location to: ${LOC}")
--      list(APPEND loc_list "${LOC}")
--
--      set_target_properties(${TGT_${tgt}} PROPERTIES
--        IMPORTED_LOCATION_${CONF} "${LOC}"
--      )
--
--      set_property(TARGET ${TGT_${tgt}} APPEND PROPERTY
--        IMPORTED_CONFIGURATIONS ${CONF}
--      )
--
--    endif()
--
--  endforeach(CONF)
--
--  #
--  # To support 'Static' build configuration the targets imported from the
--  # Protobuf project need to have IMPORTED_LOCATION_STATIC defined. We use
--  # 'Release' locations as Protobuf is built using 'Release' configuration in
--  # that case.
--  #
--
--  get_target_property(LOC ${TGT_${tgt}} IMPORTED_LOCATION_RELEASE)
--  set_property(TARGET ${TGT_${tgt}} PROPERTY IMPORTED_LOCATION_STATIC ${LOC})
--
--endforeach(tgt)
--
--
--#message("Protobuf include path: ${PROTOBUF_INCLUDE_DIR}")
--set(PROTOBUF_INCLUDE_DIR ${PROTOBUF_INCLUDE_DIR} CACHE INTERNAL "")
--
--set_target_properties(Protobuf::pb-lite PROPERTIES
--  INTERFACE_INCLUDE_DIRECTORIES "${PROTOBUF_INCLUDE_DIR}"
--)
--
--set_target_properties(Protobuf::pb-full PROPERTIES
--  INTERFACE_LINK_LIBRARIES Protobuf::pb-lite
--)
--
--# On UNIX Protobuf uses pthread library
--if(UNIX)
--  set_property(TARGET Protobuf::pb-lite APPEND PROPERTY
--    INTERFACE_LINK_LIBRARIES pthread
--  )
--endif()
--
--#
--# Note: This is needed to correctly compile headers generated by protobuf
--# with sunpro compiler.
--#
--
--if(SUNPRO)
--  set_property(TARGET Protobuf::pb-lite APPEND PROPERTY
--    INTERFACE_COMPILE_DEFINITIONS SOLARIS_64BIT_ENABLED
--  )
--endif()
--
--#
--# Try using parallel builds for protobuf.
--#
--
--include(ProcessorCount)
--ProcessorCount(N)
--
--MESSAGE("Processor Count: ${N}")
--
--set(opt_build)
--set(opt_tool)
--if(NOT N EQUAL 0)
--  if(NOT CMAKE_VERSION VERSION_LESS 3.12)
--    set(opt_build --parallel ${N})
--  elseif(CMAKE_MAKE_PROGRAM MATCHES "make")
--    set(opt_tool -j${N})
--  endif()
--endif()
--
--add_custom_command(OUTPUT "${build_stamp}"
--  COMMAND ${CMAKE_COMMAND} --build . ${opt_build} --config ${CONFIG_EXPR} -- ${opt_tool}
--  COMMAND ${CMAKE_COMMAND} -E touch "${build_stamp}"
--  WORKING_DIRECTORY "${PB_BINARY_DIR}"
--  COMMENT "Building protobuf"
--)
--
--add_custom_target(build_protobuf
--  SOURCES "${build_stamp}"
--)
--
--set_target_properties(build_protobuf PROPERTIES FOLDER "Misc")
--
--add_dependencies(Protobuf::pb-full build_protobuf)
--add_dependencies(Protobuf::pb-lite build_protobuf)
--add_dependencies(Protobuf::protoc  build_protobuf)
--
--# TODO: Handle lite/full version
--
--
-+find_package(Protobuf REQUIRED)
- 
- # Standard PROTOBUF_GENERATE_CPP modified to our usage
- 
-@@ -299,11 +77,11 @@ function(mysqlx_protobuf_generate_cpp SRCS HDRS)
-              "${CMAKE_CURRENT_BINARY_DIR}/protobuf/${FIL_WE}.pb.h"
-       COMMAND ${CMAKE_COMMAND}
-             -E make_directory "${CMAKE_CURRENT_BINARY_DIR}/protobuf"
--      COMMAND Protobuf::protoc
-+      COMMAND ${Protobuf_PROTOC_EXECUTABLE}
-       ARGS --cpp_out "${CMAKE_CURRENT_BINARY_DIR}/protobuf"
-            -I ${ABS_PATH} ${ABS_FIL}
--           --proto_path=${PROJECT_SOURCE_DIR}/protobuf/protobuf-3.6.1/src
--      DEPENDS ${ABS_FIL} #${PROTOBUF_PROTOC_EXECUTABLE}
-+           --proto_path=${Protobuf_INCLUDE_DIR}
-+      DEPENDS ${ABS_FIL} #${Protobuf_PROTOC_EXECUTABLE}
-       COMMENT "Running C++ protocol buffer compiler on ${FIL}"
-       VERBATIM
-     )
---- a/cdk/core/CMakeLists.txt
-+++ b/cdk/core/CMakeLists.txt
-@@ -44,7 +44,7 @@ add_library(cdk STATIC ${cdk_sources} ${HEADERS})
- 
- target_link_libraries(cdk
-   PUBLIC  cdk_mysqlx cdk_parser
--  PRIVATE Protobuf::pb-lite  # required by codecc.cc
-+  PRIVATE protobuf  # required by codecc.cc
- )
- 
- add_coverage(cdk)
---- a/cdk/protocol/mysqlx/CMakeLists.txt
-+++ b/cdk/protocol/mysqlx/CMakeLists.txt
-@@ -126,11 +126,7 @@ target_include_directories(cdk_proto_mysqlx PRIVATE
-   ${CMAKE_CURRENT_BINARY_DIR}
- )
- 
--if(use_full_protobuf)
--  target_link_libraries(cdk_proto_mysqlx PRIVATE Protobuf::pb-full)
--else()
--  target_link_libraries(cdk_proto_mysqlx PRIVATE Protobuf::pb-lite)
--endif()
-+target_link_libraries(cdk_proto_mysqlx PRIVATE protobuf)
- 
- target_link_libraries(cdk_proto_mysqlx PRIVATE cdk_foundation)
- 
---- a/jdbc.cmake
-+++ b/jdbc.cmake
-@@ -66,7 +66,7 @@ if(MYSQL_CONFIG_EXECUTABLE)
-   list(APPEND jdbc_cmake_opts -DMYSQL_CONFIG_EXECUTABLE=${MYSQL_CONFIG_EXECUTABLE})
- endif()
- 
--list(APPEND jdbc_cmake_opts -DMYSQLCLIENT_STATIC_LINKING=ON)
-+list(APPEND jdbc_cmake_opts -DMYSQLCLIENT_STATIC_LINKING=OFF)
- 
- if(CMAKE_BUILD_TYPE)
-   if(CMAKE_BUILD_TYPE MATCHES "[Ss][Tt][Aa][Tt][Ii][Cc]")
---- a/jdbc/CMakeLists.txt
-+++ b/jdbc/CMakeLists.txt
-@@ -272,7 +272,7 @@ set_target_properties(connector-jdbc
- 
- 
- install(TARGETS connector-jdbc
--  CONFIGURATIONS Release RelWithDebInfo
-+  CONFIGURATIONS Release RelWithDebInfo Gentoo
-   ARCHIVE DESTINATION "${INSTALL_LIB_DIR_STATIC}" COMPONENT JDBCDev
-   RUNTIME DESTINATION "${INSTALL_LIB_DIR}" COMPONENT JDBCDll
-   LIBRARY DESTINATION "${INSTALL_LIB_DIR}" COMPONENT JDBCDll