net-irc/inspircd: Bump to 3.5.0

Signed-off-by: Wade Cline <wadecline@hotmail.com>
Closes: https://github.com/gentoo/gentoo/pull/14546
Signed-off-by: Joonas Niilola <juippis@gentoo.org>

1 files changed, 346 insertions, 0 deletions

diff --git a/net-irc/inspircd/files/inspircd-3.5.0-fix-path-builds.patch b/net-irc/inspircd/files/inspircd-3.5.0-fix-path-builds.patch
new file mode 100644
index 000000000000..6f156d0cce11
--- /dev/null
+++ b/net-irc/inspircd/files/inspircd-3.5.0-fix-path-builds.patch
@@ -0,0 +1,346 @@
+diff --git a/docs/conf/codepages/ascii.conf.example b/docs/conf/codepages/ascii.conf
+similarity index 100%
+rename from docs/conf/codepages/ascii.conf.example
+rename to docs/conf/codepages/ascii.conf
+diff --git a/docs/conf/codepages/latin1.conf.example b/docs/conf/codepages/latin1.conf
+similarity index 97%
+rename from docs/conf/codepages/latin1.conf.example
+rename to docs/conf/codepages/latin1.conf
+index 3beb002fd..f5c6b98dc 100644
+--- a/docs/conf/codepages/latin1.conf.example
++++ b/docs/conf/codepages/latin1.conf
+@@ -39,4 +39,4 @@
+ <cpcase lower="222" upper="254"> # þ => Þ
+ 
+ # Include the ASCII rules to avoid duplication.
+-<include file="examples/codepages/ascii.conf.example">
++<include file="/etc/inspircd/codepages/ascii.conf">
+diff --git a/docs/conf/codepages/rfc1459.conf.example b/docs/conf/codepages/rfc1459.conf
+similarity index 100%
+rename from docs/conf/codepages/rfc1459.conf.example
+rename to docs/conf/codepages/rfc1459.conf
+diff --git a/docs/conf/codepages/strict-rfc1459.conf.example b/docs/conf/codepages/strict-rfc1459.conf
+similarity index 100%
+rename from docs/conf/codepages/strict-rfc1459.conf.example
+rename to docs/conf/codepages/strict-rfc1459.conf
+diff --git a/docs/conf/filter.conf.example b/docs/conf/filter.conf
+similarity index 100%
+rename from docs/conf/filter.conf.example
+rename to docs/conf/filter.conf
+diff --git a/docs/conf/helpop.conf.example b/docs/conf/helpop.conf
+similarity index 100%
+rename from docs/conf/helpop.conf.example
+rename to docs/conf/helpop.conf
+diff --git a/docs/conf/inspircd.conf.example b/docs/conf/inspircd.conf
+similarity index 98%
+rename from docs/conf/inspircd.conf.example
+rename to docs/conf/inspircd.conf
+index dbd56d2fe..55535b1a0 100644
+--- a/docs/conf/inspircd.conf.example
++++ b/docs/conf/inspircd.conf
+@@ -247,10 +247,10 @@
+ # This can be done by using <connect registered="no">                 #
+ 
+ # To enable IRCCloud on your network uncomment this:
+-#<include file="examples/providers/irccloud.conf.example">
++#<include file="/etc/inspircd/providers/irccloud.conf">
+ 
+ # To enable KiwiIRC.com on your network uncomment this:
+-#<include file="examples/providers/kiwiirc-com.conf.example">
++#<include file="/etc/inspircd/providers/kiwiirc-com.conf">
+ 
+ # A connect class with <connect:deny> set denies connections from the specified host/IP range.
+ <connect
+@@ -494,11 +494,11 @@
+ 
+ # This file has all the information about oper classes, types and o:lines.
+ # You *MUST* edit it.
+-#<include file="examples/opers.conf.example">
++#<include file="/etc/inspircd/opers.conf">
+ 
+ # This file has all the information about server links and ulined servers.
+ # You *MUST* edit it if you intend to link servers.
+-#<include file="examples/links.conf.example">
++#<include file="/etc/inspircd/links.conf">
+ 
+ #-#-#-#-#-#-#-#-#-#-  MISCELLANEOUS CONFIGURATION  -#-#-#-#-#-#-#-#-#-#
+ #                                                                     #
+@@ -507,7 +507,7 @@
+ #
+ #   motd - displayed on connect and when a user executes /MOTD
+ # Modules can also define their own files
+-<files motd="examples/motd.txt.example">
++<files motd="/etc/inspircd/motd.txt">
+ 
+ # Example of an executable file include. Note this will be read on rehash,
+ # not when the command is run.
+@@ -543,7 +543,7 @@
+ # the default of 'inspircd.pid' is used.                              #
+ #                                                                     #
+ 
+-#<pid file="/path/to/inspircd.pid">
++#<pid file="/var/run/inspircd/inspircd.pid">
+ 
+ #-#-#-#-#-#-#-#-#-#-#-#-#- LIST MODE LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#
+ #                                                                     #
+@@ -693,7 +693,7 @@
+          #                    messages (requires the stripcolor module).
+          #  - topiclock       Channel mode +t - limits changing the topic to (half)ops
+          # You can also configure this on a per-channel basis with a channel mode.
+-         # See m_exemptchanops in modules.conf.example for more details.
++         # See m_exemptchanops in modules.conf for more details.
+          exemptchanops="censor:o filter:o nickflood:o nonick:v regmoderated:o"
+ 
+          # invitebypassmodes: This allows /INVITE to bypass other channel modes.
+@@ -1041,7 +1041,7 @@
+ # provide almost all the features of InspIRCd. :)                     #
+ #                                                                     #
+ # The default does nothing -- we include it for simplicity for you.   #
+-#<include file="examples/modules.conf.example">
++#<include file="/etc/inspircd/modules.conf">
+ 
+ #-#-#-#-#-#-#-#-#-#-#-# SERVICES CONFIGURATION  #-#-#-#-#-#-#-#-#-#-#-#
+ #                                                                     #
+@@ -1050,13 +1050,13 @@
+ # exemptions for services pseudoclients:                              #
+ #
+ # Anope users should uncomment this:
+-#<include file="examples/services/anope.conf.example">
++#<include file="/etc/inspircd/aliases/anope.conf">
+ #
+ # Atheme users should uncomment this:
+-#<include file="examples/services/atheme.conf.example">
++#<include file="/etc/inspircd/aliases/atheme.conf">
+ #
+ # Users of other services should uncomment this:
+-#<include file="examples/services/generic.conf.example">
++#<include file="/etc/inspircd/aliases/generic.conf">
+ 
+ #########################################################################
+ #                                                                       #
+diff --git a/docs/conf/links.conf.example b/docs/conf/links.conf
+similarity index 98%
+rename from docs/conf/links.conf.example
+rename to docs/conf/links.conf
+index 09b3bb3d5..22db1bdab 100644
+--- a/docs/conf/links.conf.example
++++ b/docs/conf/links.conf
+@@ -121,4 +121,4 @@
+ 
+ # Once you have edited this file you can remove this line. This is just to
+ # ensure that you don't hastily include the file without reading it.
+-<die reason="Using links.conf.example without editing it is a security risk">
++<die reason="Using links.conf without editing it is a security risk">
+diff --git a/docs/conf/modules.conf.example b/docs/conf/modules.conf
+similarity index 99%
+rename from docs/conf/modules.conf.example
+rename to docs/conf/modules.conf
+index d68248163..b55d368fb 100644
+--- a/docs/conf/modules.conf.example
++++ b/docs/conf/modules.conf
+@@ -576,10 +576,10 @@
+ # and case mapping.
+ #
+ # You should include one of the following files to set your codepage:
+-#<include file="examples/codepages/ascii.conf.example">
+-#<include file="examples/codepages/latin1.conf.example">
+-#<include file="examples/codepages/rfc1459.conf.example">
+-#<include file="examples/codepages/strict-rfc1459.conf.example">
++#<include file="/etc/inspircd/codepages/ascii.conf">
++#<include file="/etc/inspircd/codepages/latin1.conf">
++#<include file="/etc/inspircd/codepages/rfc1459.conf">
++#<include file="/etc/inspircd/codepages/strict-rfc1459.conf">
+ #
+ # You can also define a custom codepage. For details on how to do this
+ # please refer to the docs site:
+@@ -853,7 +853,7 @@
+ # anticaps, auditorium-see, auditorium-vis, blockcaps, blockcolor,    #
+ # censor, filter, flood, nickflood, noctcp, nonick, nonotice,         #
+ # regmoderated, stripcolor, and topiclock.                            #
+-# See <options:exemptchanops> in inspircd.conf.example for a more     #
++# See <options:exemptchanops> in inspircd.conf for a more             #
+ # detailed list of the restriction modes that can be exempted.        #
+ # These are settable using: /MODE #chan +X <restriction>:<status>     #
+ #<module name="exemptchanops">
+@@ -889,7 +889,7 @@
+ # Your choice of regex engine must match on all servers network-wide. #
+ #                                                                     #
+ # To learn more about the configuration of this module, read          #
+-# examples/filter.conf.example, which covers the various types of     #
++# filter.conf, which covers the various types of                      #
+ # filters and shows how to add exemptions.                            #
+ #                                                                     #
+ #-#-#-#-#-#-#-#-#-#-#-  FILTER  CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#-#
+@@ -898,7 +898,7 @@
+ # specify below the path to the filter.conf file, or define some      #
+ # <keyword> tags.                                                     #
+ #                                                                     #
+-#<include file="examples/filter.conf.example">
++#<include file="/etc/inspircd/filter.conf">
+ 
+ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+ # Flash Policy Daemon module: Allows Flash IRC clients (e.g. LightIRC)#
+@@ -988,7 +988,7 @@
+ # If you specify to use the helpop module, then specify below the     #
+ # path to the helpop.conf file.                                       #
+ #                                                                     #
+-#<include file="examples/helpop.conf.example">
++#<include file="/etc/inspircd/helpop.conf">
+ 
+ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+ # Hide chans module: Allows users to hide their channels list from non-
+@@ -1575,7 +1575,7 @@
+ # onoper        - If on, the message is sent on /OPER, otherwise it's #
+ #                 only sent when /OPERMOTD is used.                   #
+ #                                                                     #
+-#<opermotd file="examples/opermotd.txt.example" onoper="yes">
++#<opermotd file="/etc/inspircd/opermotd.txt" onoper="yes">
+ 
+ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+ # Override module: Adds support for oper override.
+@@ -2153,7 +2153,7 @@
+ # connections in order to oper up. It is highly recommended to load
+ # this module if you use SSL on your network.
+ # For how to use the oper features, please see the first
+-# example <oper> tag in opers.conf.example.
++# example <oper> tag in opers.conf.
+ #
+ #<module name="sslinfo">
+ #
+diff --git a/docs/conf/motd.txt.example b/docs/conf/motd.txt
+similarity index 96%
+rename from docs/conf/motd.txt.example
+rename to docs/conf/motd.txt
+index 9281cd4b9..a4ac6964b 100644
+--- a/docs/conf/motd.txt.example
++++ b/docs/conf/motd.txt
+@@ -23,7 +23,7 @@
+                     `-.__  `----"""    __.-'
+                          `--..____..--'
+ 
+-      +---- To change this see \bmotd.txt.example\x ----+
++      +---- To change this see \bmotd.txt        \x ----+
+       |                                             |
+       |   * \bWeb:\x https://www.inspircd.org           |
+       |   * \bIRC:\x irc.inspircd.org #inspircd         |
+diff --git a/docs/conf/opermotd.txt.example b/docs/conf/opermotd.txt
+similarity index 96%
+rename from docs/conf/opermotd.txt.example
+rename to docs/conf/opermotd.txt
+index a25d90380..68671a081 100644
+--- a/docs/conf/opermotd.txt.example
++++ b/docs/conf/opermotd.txt
+@@ -23,7 +23,7 @@
+                     `-.__  `----"""    __.-'
+                          `--..____..--'
+ 
+-      +-- To change this see \bopermotd.txt.example\x --+
++      +-- To change this see \bopermotd.txt        \x --+
+       |                                             |
+       |   * \bWeb:\x https://www.inspircd.org           |
+       |   * \bIRC:\x irc.inspircd.org #inspircd         |
+diff --git a/docs/conf/opers.conf.example b/docs/conf/opers.conf
+similarity index 99%
+rename from docs/conf/opers.conf.example
+rename to docs/conf/opers.conf
+index 7cad2589c..082009da9 100644
+--- a/docs/conf/opers.conf.example
++++ b/docs/conf/opers.conf
+@@ -178,4 +178,4 @@
+ 
+ # Once you have edited this file you can remove this line. This is just to
+ # ensure that you don't hastily include the file without reading it.
+-<die reason="Using opers.conf.example without editing it is a security risk">
++<die reason="Using opers.conf without editing it is a security risk">
+diff --git a/docs/conf/providers/irccloud.conf.example b/docs/conf/providers/irccloud.conf
+similarity index 100%
+rename from docs/conf/providers/irccloud.conf.example
+rename to docs/conf/providers/irccloud.conf
+diff --git a/docs/conf/providers/kiwiirc-com.conf.example b/docs/conf/providers/kiwiirc-com.conf
+similarity index 100%
+rename from docs/conf/providers/kiwiirc-com.conf.example
+rename to docs/conf/providers/kiwiirc-com.conf
+diff --git a/docs/conf/quotes.txt.example b/docs/conf/quotes.txt
+similarity index 100%
+rename from docs/conf/quotes.txt.example
+rename to docs/conf/quotes.txt
+diff --git a/docs/conf/services/anope.conf.example b/docs/conf/services/anope.conf
+similarity index 86%
+rename from docs/conf/services/anope.conf.example
+rename to docs/conf/services/anope.conf
+index 5c8f859ff..69a1ab50a 100644
+--- a/docs/conf/services/anope.conf.example
++++ b/docs/conf/services/anope.conf
+@@ -2,7 +2,7 @@
+ # by Anope. See https://www.anope.org for more information on Anope.
+ 
+ # This file inherits from the generic config to avoid repetition.
+-<include file="examples/services/generic.conf.example">
++<include file="/etc/inspircd/services/generic.conf">
+ 
+ # /GLOBAL <message>
+ # Sends a global notice.
+diff --git a/docs/conf/services/atheme.conf.example b/docs/conf/services/atheme.conf
+similarity index 98%
+rename from docs/conf/services/atheme.conf.example
+rename to docs/conf/services/atheme.conf
+index d509522b8..c1e906ff7 100644
+--- a/docs/conf/services/atheme.conf.example
++++ b/docs/conf/services/atheme.conf
+@@ -3,7 +3,7 @@
+ # information on Atheme.
+ 
+ # This file inherits from the generic config to avoid repetition.
+-<include file="examples/services/generic.conf.example">
++<include file="/etc/inspircd/services/generic.conf">
+ 
+ # Long hand aliases for services pseudoclients.
+ <alias text="ALIS"      replace="SQUERY $requirement :$2-" requires="ALIS"      uline="yes">
+diff --git a/docs/conf/services/generic.conf.example b/docs/conf/services/generic.conf
+similarity index 100%
+rename from docs/conf/services/generic.conf.example
+rename to docs/conf/services/generic.conf
+diff --git a/make/template/main.mk b/make/template/main.mk
+index a57595c9d..42fef2563 100644
+--- a/make/template/main.mk
++++ b/make/template/main.mk
+@@ -220,10 +220,10 @@ install: target
+ 	@-$(INSTALL) -d -g @GID@ -o @UID@ -m $(INSTMODE_DIR) $(BINPATH)
+ 	@-$(INSTALL) -d -g @GID@ -o @UID@ -m $(INSTMODE_DIR) $(CONPATH)
+ 	@-$(INSTALL) -d -g @GID@ -o @UID@ -m $(INSTMODE_DIR) $(DATPATH)
+-	@-$(INSTALL) -d -g @GID@ -o @UID@ -m $(INSTMODE_DIR) $(EXAPATH)/codepages
+-	@-$(INSTALL) -d -g @GID@ -o @UID@ -m $(INSTMODE_DIR) $(EXAPATH)/providers
+-	@-$(INSTALL) -d -g @GID@ -o @UID@ -m $(INSTMODE_DIR) $(EXAPATH)/services
+-	@-$(INSTALL) -d -g @GID@ -o @UID@ -m $(INSTMODE_DIR) $(EXAPATH)/sql
++	@-$(INSTALL) -d -g @GID@ -o @UID@ -m $(INSTMODE_DIR) $(CONPATH)/codepages
++	@-$(INSTALL) -d -g @GID@ -o @UID@ -m $(INSTMODE_DIR) $(CONPATH)/providers
++	@-$(INSTALL) -d -g @GID@ -o @UID@ -m $(INSTMODE_DIR) $(CONPATH)/services
++	@-$(INSTALL) -d -g @GID@ -o @UID@ -m $(INSTMODE_DIR) $(CONPATH)/sql
+ 	@-$(INSTALL) -d -g @GID@ -o @UID@ -m $(INSTMODE_DIR) $(LOGPATH)
+ 	@-$(INSTALL) -d -g @GID@ -o @UID@ -m $(INSTMODE_DIR) $(MANPATH)
+ 	@-$(INSTALL) -d -g @GID@ -o @UID@ -m $(INSTMODE_DIR) $(MODPATH)
+@@ -240,11 +240,11 @@ endif
+ 	-$(INSTALL) -g @GID@ -o @UID@ -m $(INSTMODE_TXT) @CONFIGURE_DIRECTORY@/inspircd.1 $(MANPATH) 2>/dev/null
+ 	-$(INSTALL) -g @GID@ -o @UID@ -m $(INSTMODE_TXT) @CONFIGURE_DIRECTORY@/inspircd-genssl.1 $(MANPATH) 2>/dev/null
+ 	-$(INSTALL) -g @GID@ -o @UID@ -m $(INSTMODE_BIN) tools/genssl $(BINPATH)/inspircd-genssl 2>/dev/null
+-	-$(INSTALL) -g @GID@ -o @UID@ -m $(INSTMODE_TXT) docs/conf/*.example $(EXAPATH)
+-	-$(INSTALL) -g @GID@ -o @UID@ -m $(INSTMODE_TXT) docs/conf/codepages/*.example $(EXAPATH)/codepages
+-	-$(INSTALL) -g @GID@ -o @UID@ -m $(INSTMODE_TXT) docs/conf/providers/*.example $(EXAPATH)/providers
+-	-$(INSTALL) -g @GID@ -o @UID@ -m $(INSTMODE_TXT) docs/conf/services/*.example $(EXAPATH)/services
+-	-$(INSTALL) -g @GID@ -o @UID@ -m $(INSTMODE_TXT) docs/sql/*.sql $(EXAPATH)/sql
++	-$(INSTALL) -g @GID@ -o @UID@ -m $(INSTMODE_TXT) docs/conf/*.{conf,txt} $(CONPATH)
++	-$(INSTALL) -g @GID@ -o @UID@ -m $(INSTMODE_TXT) docs/conf/codepages/* $(CONPATH)/codepages
++	-$(INSTALL) -g @GID@ -o @UID@ -m $(INSTMODE_TXT) docs/conf/providers/* $(CONPATH)/providers
++	-$(INSTALL) -g @GID@ -o @UID@ -m $(INSTMODE_TXT) docs/conf/services/* $(CONPATH)/services
++	-$(INSTALL) -g @GID@ -o @UID@ -m $(INSTMODE_TXT) docs/sql/*.sql $(CONPATH)/sql
+ 	-$(INSTALL) -g @GID@ -o @UID@ -m $(INSTMODE_PRV) *.pem $(CONPATH) 2>/dev/null
+ 	@echo ""
+ 	@echo "*************************************"
+@@ -258,7 +258,6 @@ endif
+ 	@echo '  Data:' $(DATPATH)
+ 	@echo 'To start the ircd, run:' $(SCRPATH)/inspircd start
+ 	@echo 'Remember to create your config file:' $(CONPATH)/inspircd.conf
+-	@echo 'Examples are available at:' $(EXAPATH)
+ 
+ GNUmakefile: make/template/main.mk src/version.sh configure @CONFIGURE_CACHE_FILE@
+ 	./configure --update