net-misc/sks: Unbundle cryptokit

Gentoo-Bug: 591326

Package-Manager: Portage-2.3.6, Repoman-2.3.1

2 files changed, 196 insertions, 0 deletions

diff --git a/net-misc/sks/files/sks-1.1.6-unbundle-cryptokit.patch b/net-misc/sks/files/sks-1.1.6-unbundle-cryptokit.patch
new file mode 100644
index 000000000000..da11839fa129
--- /dev/null
+++ b/net-misc/sks/files/sks-1.1.6-unbundle-cryptokit.patch
@@ -0,0 +1,79 @@
+diff -r 4af75b3526d9 Makefile
+--- a/Makefile	Sun Jun 25 20:39:45 2017 +0000
++++ b/Makefile	Mon Jun 26 00:27:10 2017 +0200
+@@ -53,10 +53,11 @@
+ endif
+ 
+ CAMLP4=-pp $(CAMLP4O)
+-CAMLINCLUDE= -I lib -I bdb
++CRYPTOKIT=$(shell ocamlfind query cryptokit)
++CAMLINCLUDE= -I lib -I bdb -I $(CRYPTOKIT)
+ COMMONCAMLFLAGS=$(CAMLINCLUDE) $(OCAMLLIB) $(CAMLLDFLAGS) -ccopt -Lbdb -dtypes $(WARNERR)
+ OCAMLDEP=ocamldep $(CAMLP4)
+-CAMLLIBS=unix.cma str.cma bdb.cma nums.cma bigarray.cma cryptokit.cma
++CAMLLIBS=unix.cma str.cma bdb.cma nums.cma bigarray.cma $(CRYPTOKIT)/cryptokit.cma
+ OCAMLFLAGS=$(COMMONCAMLFLAGS) -g $(CAMLLIBS)
+ OCAMLOPTFLAGS=$(COMMONCAMLFLAGS) -inline 40 $(CAMLLIBS:.cma=.cmxa)
+ 
+@@ -107,7 +108,7 @@
+ 
+ EXEOBJS.bc=$(RSERVOBJS.bc) build.cmo fastbuild.cmo dbserver.cmo pdiskTest.cmo
+ 
+-LIBS.bc= lib/cryptokit.cma bdb/bdb.cma
++LIBS.bc= bdb/bdb.cma
+ LIBS=$(LIBS.bc:.cma=.cmxa)
+ 
+ VERSION := $(shell cat VERSION)
+@@ -278,32 +279,11 @@
+ 	touch prepared
+ 
+ 
+-CKVER=cryptokit-1.7
+-CKDIR=$(CKVER)/src
+-
+ $(CKVER)/README.txt:
+ 	tar xmvfz $(CKVER).tar.gz
+ 	patch -p 0 < $(CKVER)-sks.patch
+ 	patch -p 0 < $(CKVER)-sks-custom_compare.patch
+ 
+-$(CKDIR)/cryptokit.cma: $(CKVER)/README.txt
+-	cd $(CKDIR) && $(MAKE) all
+-
+-$(CKDIR)/cryptokit.cmxa: $(CKVER)/README.txt
+-	cd $(CKDIR) && $(MAKE) allopt
+-
+-lib/cryptokit.cma: $(CKDIR)/cryptokit.cma $(CKDIR)/cryptokit.cmxa prepared
+-	cp $(CKDIR)/cryptokit.cmi $(CKDIR)/cryptokit.cma \
+-	   $(CKDIR)/cryptokit.mli lib
+-	cp $(CKDIR)/libcryptokit.a lib
+-	if test -f $(CKDIR)/dllcryptokit.so; then \
+-	   cp $(CKDIR)/dllcryptokit.so lib; fi
+-	if test -f $(CKDIR)/cryptokit.cmxa; then \
+-	   cp $(CKDIR)/cryptokit.cmxa $(CKDIR)/cryptokit.cmx \
+-	   $(CKDIR)/cryptokit.a lib; fi
+-
+-lib/cryptokit.cmxa: lib/cryptokit.cma
+-
+ ################################
+ # old stuff
+ ################################
+@@ -340,16 +320,16 @@
+ dumbloop: $(LIBS) $(ALLOBJS) dumbloop.cmo
+ 	$(OCAMLC) -o dumbloop $(OCAMLFLAGS) $(ALLOBJS) dumbloop.cmo
+ 
+-scan: $(OBJS) cryptokit dblib scan.ml
++scan: $(OBJS) dblib scan.ml
+ 	$(OCAMLC) -o scan $(OCAMLFLAGS) $(OBJS) scan.ml
+ 
+ query: $(LIBS) $(ALLOBJS) query.cmo
+ 	$(OCAMLC) -o query $(OCAMLFLAGS) $(ALLOBJS) query.cmo
+ 
+-printids: $(OBJS:.cmo=.cmx) cryptokit printids.ml
++printids: $(OBJS:.cmo=.cmx) printids.ml
+ 	$(OCAMLOPT) -o printids $(OCAMLOPTFLAGS) $(OBJS:.cmo=.cmx) printids.ml
+ 
+-printids.bc: $(OBJS) cryptokit printids.ml
++printids.bc: $(OBJS) printids.ml
+ 	$(OCAMLC) -o printids $(OCAMLFLAGS) $(OBJS) printids.ml
+ 
+ krecode: $(ALLOBJS.opt) $(LIBS) recode.ml
diff --git a/net-misc/sks/sks-1.1.6-r1.ebuild b/net-misc/sks/sks-1.1.6-r1.ebuild
new file mode 100644
index 000000000000..1368af1fdc21
--- /dev/null
+++ b/net-misc/sks/sks-1.1.6-r1.ebuild
@@ -0,0 +1,117 @@
+# Copyright 1999-2017 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=6
+
+inherit multilib user readme.gentoo-r1 systemd
+
+DESCRIPTION="An OpenPGP keyserver which is decentralized with highly reliable synchronization"
+HOMEPAGE="https://bitbucket.org/skskeyserver/sks-keyserver"
+SRC_URI="https://bitbucket.org/skskeyserver/sks-keyserver/downloads/${P}.tgz"
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE="optimize test"
+DOC_CONTENTS="To get sks running, first build the database,
+start the database, import atleast one key, then
+run a cleandb. See the sks man page for more information
+Typical DB_CONFIG file and sksconf has been installed
+in /var/lib/sks and can be used as templates by renaming
+to remove the .typical extension. The DB_CONFIG file has
+to be in place before doing the database build, or the BDB
+environment has to be manually cleared from both KDB and PTree.
+The same applies if you are upgrading to this version with an existing KDB/Ptree,
+using another version of BDB than 4.8; you need to clear the environment
+using e.g. db4.6_recover -h . and db4.6_checkpoint -1h . in both KDB and PTree
+Additionally a sample web interface has been installed as
+web.typical in /var/lib/sks that can be used by renaming it to web
+Important: It is strongly recommended to set up SKS behind a
+reverse proxy. Instructions on properly configuring SKS can be
+found at https://bitbucket.org/skskeyserver/sks-keyserver/wiki/Peering"
+
+DEPEND=">=dev-lang/ocaml-4.0
+	dev-ml/findlib
+	dev-ml/camlp4
+	dev-ml/cryptokit:0/1.10
+	sys-libs/db:5.3"
+RDEPEND="${DEPEND}"
+
+pkg_setup() {
+	ebegin "Creating named group and user"
+	enewgroup sks
+	enewuser sks -1 -1 /var/lib/sks sks
+}
+
+src_prepare() {
+	eapply "${FILESDIR}/${P}-unbundle-cryptokit.patch"
+	cp Makefile.local.unused Makefile.local || die
+	sed -i \
+		-e "s:^BDBLIB=.*$:BDBLIB=-L/usr/$(get_libdir):g" \
+		-e "s:^BDBINCLUDE=.*$:BDBINCLUDE=-I/usr/include/db5.3/:g" \
+		-e "s:^LIBDB=.*$:LIBDB=-ldb-5.3:g" \
+		-e "s:^PREFIX=.*$:PREFIX=${D}/usr:g" \
+		-e "s:^MANDIR=.*$:MANDIR=${D}/usr/share/man:g" \
+		Makefile.local || die
+	sed -i \
+		-e 's:^CAMLINCLUDE= -I lib -I bdb$:CAMLINCLUDE= -I lib -I bdb -I +cryptokit:g' \
+		-e 's:-Werror-implicit-function-declaration::g' \
+		Makefile bdb/Makefile || die
+	sed -i \
+		-e 's:/usr/sbin/sks:/usr/bin/sks:g' \
+		sks_build.sh || die
+	eapply_user
+}
+
+src_compile() {
+	emake dep
+	# sks build fails with paralell build in module Bdb
+	emake -j1 all
+	if use optimize; then
+		emake all.bc
+	fi
+}
+
+src_test() {
+	./sks unit_test || die
+}
+
+src_install() {
+	if use optimize; then
+		emake install.bc
+		dosym /usr/bin/sks.bc usr/bin/sks
+		dosym /usr/bin/sks_add_mail.bc usr/bin/sks_add_mail
+	else
+		emake install
+	fi
+
+	dodoc README.md
+
+	newinitd "${FILESDIR}/sks-db.initd" sks-db
+	newinitd "${FILESDIR}/sks-recon.initd" sks-recon
+	newconfd "${FILESDIR}/sks.confd" sks
+	systemd_dounit "${FILESDIR}"/sks-db.service
+	systemd_dounit "${FILESDIR}"/sks-recon.service
+
+	dodir "/var/lib/sks/web.typical"
+	insinto /var/lib/sks
+	newins sampleConfig/DB_CONFIG DB_CONFIG.typical
+	newins sampleConfig/sksconf.typical sksconf.typical
+	insinto /var/lib/sks/web.typical
+	doins sampleWeb/HTML5/*
+
+	keepdir /var/lib/sks
+	readme.gentoo_create_doc
+}
+
+pkg_postinst() {
+	readme.gentoo_print_elog
+
+	if [[ -n ${REPLACING_VERSIONS} ]]; then
+		einfo "Note when upgrading from versions of SKS earlier than 1.1.4"
+		einfo "The default values for pagesize settings have changed. To continue"
+		einfo "using an existing DB without rebuilding, explicit settings have to be"
+		einfo "added to the sksconf file."
+		einfo "pagesize:       4"
+		einfo "ptree_pagesize: 1"
+	fi;
+}