ver bump

13 files changed, 5 insertions, 1509 deletions

diff --git a/games-emulation/atari800/files/1.2.2/atari800.1 b/games-emulation/atari800/files/1.2.2/atari800.1
deleted file mode 100644
index 3484b327e6f2..000000000000
--- a/games-emulation/atari800/files/1.2.2/atari800.1
+++ /dev/null
@@ -1,661 +0,0 @@
-.TH ATARI800 1 "26 February 2002"
-.SH NAME
-atari800 \- Atari 800 Emulator, Version 1.2.2
-.SH SYNOPSIS
-\fBatari800\fP [options] [diskfiles...]
-.SH DESCRIPTION
-\fIatari800\fP emulates the Atari 800, Atari 800 XL, Atari 130 XE and
-Atari 5200 Games System.
-.SS Options
-.TP
-\fB-help
-Print emulator version.
-.TP
-\fB-v
-Print emulator version.
-.TP
-\fB-verbose
-Display framerate when exiting
-.TP
-\fB-configure
-Starts emulator in run-time configuration mode.
-.TP
-\fB-config filename
-Specify an alternative configuration filename.
-
-.TP
-\fB-osa_rom filename
-Path to file containing Atari Rev.A Operating System.
-Used to override paths defined at compile time.
-.TP
-\fB-osb_rom filename
-Path to file containing Atari Rev.B Operating System.
-Used to override paths defined at compile time.
-.TP
-\fB-xlxe_rom filename
-Path to file containing Atari XL/XE Operating System.
-Used to override paths defined at compile time.
-.TP
-\fB-5200_rom filename
-Path to file containing Atari 5200 Games System ROM.
-Used to override paths defined at compile time.
-.TP
-\fB-basic_rom filename
-Path to file containing Atari BASIC ROM.
-Used to override paths defined at compile time.
-
-.TP
-\fB-xl
-Emulate Atari 800 XL.
-.TP
-\fB-xe
-Emulate Atari 130 XE - but Antic accesses the same bank the CPU is using.
-.TP
-\fB-320xe
-Emulate Atari 320 XE (Compy Shop)
-.TP
-\fB-rambo
-Emulate Atari 320 XE (Rambo)
-.TP
-\fB-5200
-Emulate Atari 5200 - Games controller emulation has not been implemented yet!
-.TP
-\fB-emuos
-Use EmuOS
-
-.TP
-\fB-a
-Use Atari OS/A.
-.TP
-\fB-b
-Use Atari OS/B.
-.TP
-\fB-c
-Enable RAM between $c000 and $d000.
-
-.TP
-\fB-pal                
-Emulate PAL TV mode
-.TP
-\fB-ntsc               
-Emulate NTSC TV mode
-
-.TP
-\fB-nobasic
-Used to disable Basic when starting the emulator in XL/XE mode.
-Simulates the Option key being held down during system boot.
-.TP
-\fB-basic
-Turn on Atari BASIC ROM
-
-.TP
-\fB-cart <filename>    
-Insert cartridge (CART or raw format)
-.TP
-\fB-run <filename>     
-Run Atari executable file (EXE, COM, XEX)
-.TP
-\fB-tape <filename>    
-Attach cassette image (CAS format or raw file)
-.TP
-\fB-boottape <filename>
-Attach cassette image and boot it
-
-.TP
-\fB-nopatch
-Normally the OS is patched giving very fast I/O. This options prevents
-the patch from being applied so that the OS accesses the serial port
-hardware directly. This option will probably never be needed since
-programs that access the serial hardware should work even if the OS
-has been patched.
-.TP
-\fB-nopatchall         
-Don't patch OS at all, H: and P: devices won't work
-
-.TP
-\fB-H1 <path>          
-Set path for H1: device
-.TP
-\fB-H2 <path>          
-Set path for H2: device
-.TP
-\fB-H3 <path>          
-Set path for H3: device
-.TP
-\fB-H4 <path>          
-Set path for H4: device
-.TP
-\fB-hdreadonly <onoff> 
-Enable (1) or disable (0) read-only mode for H: device
-.TP
-\fB-devbug             
-Put debugging messages for H: and P: devices in log file
-
-.TP
-\fB-rtime <onoff>      
-Enable (1) or disable (0) R-Time 8 emulation
-
-.TP
-\fB-mouse off          
-Do not use mouse
-.TP
-\fB-mouse pad          
-Emulate paddles
-.TP
-\fB-mouse touch        
-Emulate Atari Touch Tablet
-.TP
-\fB-mouse koala        
-Emulate Koala Pad
-.TP
-\fB-mouse pen          
-Emulate Light Pen
-.TP
-\fB-mouse gun          
-Emulate Light Gun
-.TP
-\fB-mouse amiga        
-Emulate Amiga mouse
-.TP
-\fB-mouse st           
-Emulate Atari ST mouse
-.TP
-\fB-mouse trak         
-Emulate Atari Trak-Ball
-.TP
-\fB-mouse joy          
-Emulate joystick using mouse
-.TP
-\fB-mouseport <num>    
-Set mouse port 1-4 (default 1)
-.TP
-\fB-mousespeed <num>   
-Set mouse speed 1-9 (default 3)
-
-.TP
-\fB-refresh
-Controls screen refresh rate. A numerical value follows this option
-which specifies how many emulated screen updates are required before
-the actual screen is updated. This value effects the speed of the
-emulation: A higher value results in faster CPU emulation but a
-less frequently updated screen.
-
-.TP
-\fB-artif <mode>       
-Set artifacting mode 0-4 (0 = disable)
-.TP
-\fB-palette <filename> 
-Read Atari colors from ACT file
-.TP
-\fB-black <num>        
-Set black level 0-255
-.TP
-\fB-while <num>        
-Set white level 0-255
-.TP
-\fB-colors <num>       
-Set color intensity
-.TP
-\fB-colshift <num>     
-Set color shift
-.TP
-\fB-realpal            
-Use palette created by Zdenek Eisenhammer
-.TP
-\fB-oldpal             
-Use old Atari800 palette
-.TP
-\fB-foxpal             
-Use palette created by Piotr Fusik
-
-.TP
-\fB-sound              
-Enable sound
-.TP
-\fB-nosound            
-Disable sound
-.TP
-\fB-dsprate <freq>     
-Set mixing frequency (Hz)
-.TP
-\fB-snddelay <time>    
-Set sound delay (milliseconds)
-
-
-.SS Curses Options
-.TP
-\fB-left
-Use columns 0 to 39.
-.TP
-\fB-central
-Use columns 20 to 59.
-.TP
-\fB-right
-Use columns 40 to 79.
-.TP
-\fB-wide1
-Use columns 0 to 79. In this mode only the even character positions
-are used. The odd locations are filled with spaces.
-.TP
-\fB-wide2
-Use columns 0 to 79. This mode is similar to \fB-wide1\fP except that
-the spaces are in reverse video if the previous character was also
-in reverse video.
-
-
-.SS Falcon Options
-.TP
-\fB-interlace <x>      
-Generate Falcon screen only every x frame
-.TP
-\fB-videl              
-Direct VIDEL programming (Falcon/VGA only)
-.TP
-\fB-double             
-Double the screen size on NOVA
-.TP
-\fB-delta              
-Delta screen output (differences only)
-
-.SS SVGALIB Options
-.TP
-\fB-interlace
-Enable screen interlace option
-
-
-.SS DOS/VGA Options
-.TP
-\fB-interlace          
-Generate screen with interlace
-.TP
-\fB-video <mode>       
-0=320x200, 1=320x240, 2=320x480 interlaced with black lines, 3=320x480 interlaced with darker lines
-.TP
-\fB-novesa             
-Do not use VESA 2 video modes
-.TP
-\fB-vretrace           
-Use vertical retrace control
-
-.TP
-\fB-LPTjoy1            
-Read joystick connected to LPT1
-.TP
-\fB-LPTjoy2            
-Read joystick connected to LPT2
-.TP
-\fB-LPTjoy3            
-Read joystick connected to LPT3
-.TP
-\fB-joyswap            
-Swap joysticks
-
-.TP
-\fB-keyboard 0         
-PC keyboard layout
-.TP
-\fB-keyboard 1         
-Atari keyboard layout
-
-
-.SS X11 Options
-.TP
-\fB-small
-Runs the emulator in a small window where each Atari 800 pixel is
-represented by one X Window pixel.
-.TP
-\fB-large
-Runs the emulator in a large window where each Atari 800 pixel is
-represented by a 2x2 X Window rectange. This mode is selected by
-default.
-.TP
-\fB-huge
-Runs the emulator in a huge window where each Atari 800 pixel is
-represented by a 3x3 X Window rectange.
-.TP
-\fB-clip_x number-of-pixels
-Sets left offset for clipping.
-.TP
-\fB-clip_width number-of-pixels
-Sets the width of the clipping-area.
-.TP
-\fB-clip_y number-of-pixels
-Sets top offset for clipping.
-.TP
-\fB-clip_height number-of-pixels
-Sets the height of the clipping-area.
-.TP
-\fB-private_cmap
-Tells the Emulator to use its own private colormap.
-.TP
-\fB-fps                
-Show framerate
-.TP
-\fB-sio                
-Show SIO monitor
-.TP
-\fB-x11bug             
-Enable debug code in atari_x11.c
-
-.TP
-\fB-keypad             
-Keypad mode
-
-.SS SDL Options
-.PP
-No SDL-specific options at this time
-
-.PD 0
-
-.SH KEYBOARD, JOYSTICK & PADDLE CONTROLS
-
-.SS Curses
-.TP
-\fBF1
-Built in User Interface
-.TP
-\fBF2
-Option
-.TP
-\fBF3
-Select
-.TP
-\fBF4
-Start
-.TP
-\fBF5
-Warm Reset
-.TP
-\fBF6
-Toggle RAM/ROM between 0x8000 and 0xbfff (PIL Mode)
-.TP
-\fBF7
-Break Key
-.TP
-\fBF8
-Cold Reset
-.TP
-\fBF9
-Exit Emulator
-.TP
-\fBF10
----
-.TP
-\fBF11
----
-.TP
-\fBF12
----
-
-.PP
-Some control have special meaning within curses and should not be used.
-
-    Avoid Control + C, J, M, Q, S and Z
-
-The remaining control characters can be typed. Control characters are
-displayed on the screen with the associated upper case character in bold.
-
-No Joystick or Paddle support in this version.
-
-.SS Falcon
-.TP
-\fBF1
-Built in User Interface
-.TP
-\fBF2
-Option
-.TP
-\fBF3
-Select
-.TP
-\fBF4
-Start
-.TP
-\fBF5
-Warm Reset
-.TP
-\fBShft+F5
-Cold Reset
-.TP
-\fBF6
-Toggle RAM/ROM between 0x8000 and 0xbfff (PIL Mode)
-.TP
-\fBF7
-Break Key
-.TP
-\fBF8
-Enter monitor
-.TP
-\fBF9
-EXIT Emulator
-.TP
-\fBHelp
-HELP key (800XL/130XE)
-
-.PP
-Joystick 0 is operated by the numeric keypad (make sure that the numeric
-keypad has been enabled).
- 
-        7 8 9
-         \\|/
-        4 5 6
-         /|\\
-        1 2 3
- 
-        And 0 is the fire key.
- 
-At the moment it is not possible to use a Paddle with this version.
-
-.SS SVGALIB
-.TP
-\fBF1
-Built in User Interface
-.TP
-\fBF2
-Option
-.TP
-\fBF3
-Select
-.TP
-\fBF4
-Start
-.TP
-\fBF5
-Warm Reset
-.TP
-\fBShft+F5
-Cold Reset
-.TP
-\fBF6
-Toggle RAM/ROM between 0x8000 and 0xbfff (PIL Mode)
-.TP
-\fBF7
-Break Key
-.TP
-\fBF8
-Enter monitor
-.TP
-\fBF9
-Exit Emulator
-.TP
-\fBF10
-Save Screenshot (+Shift=interlaced screenshot)
-.TP
-\fBF11
-Joystick Autofire On/Off
-.TP
-\fBF12
----
-.TP
-\fB`
-This character replaces the CAPS lock key because I have not found a
-way of detecting it. A future solution maybe to automatically issue a
-CAPS lock key when a transition is made between lower and upper case
-keys. i.e. If svgalib return 'a' followed by 'A' it could send 'a'
-'CAPS' 'A' to the Atari.
-
-.PP
-The CTRL+SHIFT keyboard combinations are implemented using the left
-ALT key.
-
-Joystick 0 is operated by the numeric keypad (make sure that the numeric
-keypad has been enabled).
-
-        7 8 9
-         \\|/
-        4 5 6
-         /|\\
-        1 2 3
-
-        And 0 is the fire key.
-
-At the moment it is not possible to use a Paddle with the SVGALIB
-version.
-
-.SS DOS/VGA
-.TP
-\fBF1
-Built in User Interface
-.TP
-\fBF2
-Option Key
-.TP
-\fBF3
-Select Key
-.TP
-\fBF4
-Start Key
-.TP
-\fBF5
-Warm Reset
-.TP
-\fBShft+F5
-Cold Reset
-.TP
-\fBF6
-PIL Mode (Atari800) / Help Key (XL/XE)
-.TP
-\fBF7
-Switch between Emulated joysticks mode and Normal keyboard
-.TP
-\fBF8
-Enter monitor
-.TP
-\fBF9
-EXIT Emulator
-.TP
-\fBF10
-Save Screenshot (+Shift=interlaced screenshot)
-
-.PP
-Control-C terminates the program; to type Control-c, type ALT-c instead.
-` is used as the Atari-Invers key
-
-Joysticks can be either real one connected to game port, or old 8-bit
-digital CX-40 joysticks connected to parallel port or keyboard joysticks
-(try out JOYCFG.EXE).
- 
-At the moment it is not possible to use a Paddle with this version.
-
-.SS X11
-.TP
-\fBF1
-Built in User Interface
-.TP
-\fBF2
-Option
-.TP
-\fBF3
-Select
-.TP
-\fBF4
-Start
-.TP
-\fBF5
-Warm Reset
-.TP
-\fBShft+F5
-Cold Reset
-.TP
-\fBF6
-Toggle RAM/ROM between 0x8000 and 0xbfff (PIL Mode)
-.TP
-\fBF7
-Break Key
-.TP
-\fBF8
----
-.TP
-\fBF9
-Exit Emulator
-.TP
-\fBF10
----
-.TP
-\fBF11
-Vertical Positioning: Scroll Screen Downwards
-.TP
-\fBF12
-Vertical Positioning: Scroll Screen Upwards
-.TP
-\fBALT
-Atari Key (Either ALT Key will work)
-
-.PP
-Joystick 0 is operated by the mouse position relative to the center of
-the screen. The mouse button acts as the trigger.  On Linux, standard
-joysticks are also supported.
-
-Paddle 0 is operated by moving the mouse pointer across the window.
-
-.SS SDL
-.TP
-\fBLALT+f
-switching FULLSCREEN (probably doesn't work in Windows)
-.TP
-\fBLALT+g
-switching WIDTH_MODE (so you can set 320x240)
-.TP
-\fBLALT+b
-switching BLACK-AND-WHITE (feel to power of BW monitor!)
-.TP
-\fBLALT+j
-swapping _keyboard_emulated_ joysticks
-.TP
-\fBLALT+e
-switching bpp (for debug only, will be removed soon)
-
-.PP
-To redefine keys for joystick emulation you must modify SDL_TRIG_* and
-SDL_JOY_* in atari_sdl.c, then recompile Atari800. In source you can
-also turn off sound or change defaults (FULLSCREEN, BW,
-SWAP_JOYSTICKS, WIDTH_MODE).
-
-On Linux, standard joysticks are supported.
-
-
-.PD 1
-
-.SH FILES
-.TP
-\fI/usr/share/atari800/ATARIOSA.ROM\fR
-Atari O/S A
-.TP
-\fI/usr/share/atari800/ATARIOSB.ROM\fR
-Atari O/S B
-.TP
-\fI/usr/share/atari800/ATARIXL.ROM\fR
-Atari 800 XL O/S
-.TP
-\fI/usr/share/atari800/ATARI5200.ROM\fR
-Atari 5200 O/S
-.TP
-\fI/usr/share/atari800/ATARIBAS.ROM\fR
-Atari Basic
-.SH BUGS
-A few programs cause the emulator to enter its built in debugger. The
-reason for this is unknown at the moment.
-
-The SDL port doesn't seem to recognize the
-.B -help
-option.
\ No newline at end of file
diff --git a/games-emulation/atari800/files/1.2.2/atari800.cfg b/games-emulation/atari800/files/1.2.2/atari800.cfg
deleted file mode 100644
index aae3f9b51fa2..000000000000
--- a/games-emulation/atari800/files/1.2.2/atari800.cfg
+++ /dev/null
@@ -1,24 +0,0 @@
-Atari 800 Emulator, Version 1.2.2
-OS/A_ROM=atariosa.rom
-OS/B_ROM=/usr/share/atari800/ATARIOSB.ROM
-XL/XE_ROM=/usr/share/atari800/ATARIXL.ROM
-BASIC_ROM=/usr/share/atari800/ATARIBAS.ROM
-5200_ROM=
-DISK_DIR=
-ROM_DIR=
-H1_DIR=
-H2_DIR=
-H3_DIR=
-H4_DIR=
-HD_READ_ONLY=1
-EXE_DIR=
-STATE_DIR=
-PRINT_COMMAND=lpr %s
-SCREEN_REFRESH_RATIO=1
-MACHINE_TYPE=Atari OS/B
-RAM_SIZE=48
-DEFAULT_TV_MODE=NTSC
-DISABLE_BASIC=1
-ENABLE_SIO_PATCH=1
-ENABLE_H_PATCH=1
-ENABLE_P_PATCH=1
diff --git a/games-emulation/atari800/files/1.2.5/atari800.1 b/games-emulation/atari800/files/1.2.5/atari800.1
deleted file mode 100644
index 3484b327e6f2..000000000000
--- a/games-emulation/atari800/files/1.2.5/atari800.1
+++ /dev/null
@@ -1,661 +0,0 @@
-.TH ATARI800 1 "26 February 2002"
-.SH NAME
-atari800 \- Atari 800 Emulator, Version 1.2.2
-.SH SYNOPSIS
-\fBatari800\fP [options] [diskfiles...]
-.SH DESCRIPTION
-\fIatari800\fP emulates the Atari 800, Atari 800 XL, Atari 130 XE and
-Atari 5200 Games System.
-.SS Options
-.TP
-\fB-help
-Print emulator version.
-.TP
-\fB-v
-Print emulator version.
-.TP
-\fB-verbose
-Display framerate when exiting
-.TP
-\fB-configure
-Starts emulator in run-time configuration mode.
-.TP
-\fB-config filename
-Specify an alternative configuration filename.
-
-.TP
-\fB-osa_rom filename
-Path to file containing Atari Rev.A Operating System.
-Used to override paths defined at compile time.
-.TP
-\fB-osb_rom filename
-Path to file containing Atari Rev.B Operating System.
-Used to override paths defined at compile time.
-.TP
-\fB-xlxe_rom filename
-Path to file containing Atari XL/XE Operating System.
-Used to override paths defined at compile time.
-.TP
-\fB-5200_rom filename
-Path to file containing Atari 5200 Games System ROM.
-Used to override paths defined at compile time.
-.TP
-\fB-basic_rom filename
-Path to file containing Atari BASIC ROM.
-Used to override paths defined at compile time.
-
-.TP
-\fB-xl
-Emulate Atari 800 XL.
-.TP
-\fB-xe
-Emulate Atari 130 XE - but Antic accesses the same bank the CPU is using.
-.TP
-\fB-320xe
-Emulate Atari 320 XE (Compy Shop)
-.TP
-\fB-rambo
-Emulate Atari 320 XE (Rambo)
-.TP
-\fB-5200
-Emulate Atari 5200 - Games controller emulation has not been implemented yet!
-.TP
-\fB-emuos
-Use EmuOS
-
-.TP
-\fB-a
-Use Atari OS/A.
-.TP
-\fB-b
-Use Atari OS/B.
-.TP
-\fB-c
-Enable RAM between $c000 and $d000.
-
-.TP
-\fB-pal                
-Emulate PAL TV mode
-.TP
-\fB-ntsc               
-Emulate NTSC TV mode
-
-.TP
-\fB-nobasic
-Used to disable Basic when starting the emulator in XL/XE mode.
-Simulates the Option key being held down during system boot.
-.TP
-\fB-basic
-Turn on Atari BASIC ROM
-
-.TP
-\fB-cart <filename>    
-Insert cartridge (CART or raw format)
-.TP
-\fB-run <filename>     
-Run Atari executable file (EXE, COM, XEX)
-.TP
-\fB-tape <filename>    
-Attach cassette image (CAS format or raw file)
-.TP
-\fB-boottape <filename>
-Attach cassette image and boot it
-
-.TP
-\fB-nopatch
-Normally the OS is patched giving very fast I/O. This options prevents
-the patch from being applied so that the OS accesses the serial port
-hardware directly. This option will probably never be needed since
-programs that access the serial hardware should work even if the OS
-has been patched.
-.TP
-\fB-nopatchall         
-Don't patch OS at all, H: and P: devices won't work
-
-.TP
-\fB-H1 <path>          
-Set path for H1: device
-.TP
-\fB-H2 <path>          
-Set path for H2: device
-.TP
-\fB-H3 <path>          
-Set path for H3: device
-.TP
-\fB-H4 <path>          
-Set path for H4: device
-.TP
-\fB-hdreadonly <onoff> 
-Enable (1) or disable (0) read-only mode for H: device
-.TP
-\fB-devbug             
-Put debugging messages for H: and P: devices in log file
-
-.TP
-\fB-rtime <onoff>      
-Enable (1) or disable (0) R-Time 8 emulation
-
-.TP
-\fB-mouse off          
-Do not use mouse
-.TP
-\fB-mouse pad          
-Emulate paddles
-.TP
-\fB-mouse touch        
-Emulate Atari Touch Tablet
-.TP
-\fB-mouse koala        
-Emulate Koala Pad
-.TP
-\fB-mouse pen          
-Emulate Light Pen
-.TP
-\fB-mouse gun          
-Emulate Light Gun
-.TP
-\fB-mouse amiga        
-Emulate Amiga mouse
-.TP
-\fB-mouse st           
-Emulate Atari ST mouse
-.TP
-\fB-mouse trak         
-Emulate Atari Trak-Ball
-.TP
-\fB-mouse joy          
-Emulate joystick using mouse
-.TP
-\fB-mouseport <num>    
-Set mouse port 1-4 (default 1)
-.TP
-\fB-mousespeed <num>   
-Set mouse speed 1-9 (default 3)
-
-.TP
-\fB-refresh
-Controls screen refresh rate. A numerical value follows this option
-which specifies how many emulated screen updates are required before
-the actual screen is updated. This value effects the speed of the
-emulation: A higher value results in faster CPU emulation but a
-less frequently updated screen.
-
-.TP
-\fB-artif <mode>       
-Set artifacting mode 0-4 (0 = disable)
-.TP
-\fB-palette <filename> 
-Read Atari colors from ACT file
-.TP
-\fB-black <num>        
-Set black level 0-255
-.TP
-\fB-while <num>        
-Set white level 0-255
-.TP
-\fB-colors <num>       
-Set color intensity
-.TP
-\fB-colshift <num>     
-Set color shift
-.TP
-\fB-realpal            
-Use palette created by Zdenek Eisenhammer
-.TP
-\fB-oldpal             
-Use old Atari800 palette
-.TP
-\fB-foxpal             
-Use palette created by Piotr Fusik
-
-.TP
-\fB-sound              
-Enable sound
-.TP
-\fB-nosound            
-Disable sound
-.TP
-\fB-dsprate <freq>     
-Set mixing frequency (Hz)
-.TP
-\fB-snddelay <time>    
-Set sound delay (milliseconds)
-
-
-.SS Curses Options
-.TP
-\fB-left
-Use columns 0 to 39.
-.TP
-\fB-central
-Use columns 20 to 59.
-.TP
-\fB-right
-Use columns 40 to 79.
-.TP
-\fB-wide1
-Use columns 0 to 79. In this mode only the even character positions
-are used. The odd locations are filled with spaces.
-.TP
-\fB-wide2
-Use columns 0 to 79. This mode is similar to \fB-wide1\fP except that
-the spaces are in reverse video if the previous character was also
-in reverse video.
-
-
-.SS Falcon Options
-.TP
-\fB-interlace <x>      
-Generate Falcon screen only every x frame
-.TP
-\fB-videl              
-Direct VIDEL programming (Falcon/VGA only)
-.TP
-\fB-double             
-Double the screen size on NOVA
-.TP
-\fB-delta              
-Delta screen output (differences only)
-
-.SS SVGALIB Options
-.TP
-\fB-interlace
-Enable screen interlace option
-
-
-.SS DOS/VGA Options
-.TP
-\fB-interlace          
-Generate screen with interlace
-.TP
-\fB-video <mode>       
-0=320x200, 1=320x240, 2=320x480 interlaced with black lines, 3=320x480 interlaced with darker lines
-.TP
-\fB-novesa             
-Do not use VESA 2 video modes
-.TP
-\fB-vretrace           
-Use vertical retrace control
-
-.TP
-\fB-LPTjoy1            
-Read joystick connected to LPT1
-.TP
-\fB-LPTjoy2            
-Read joystick connected to LPT2
-.TP
-\fB-LPTjoy3            
-Read joystick connected to LPT3
-.TP
-\fB-joyswap            
-Swap joysticks
-
-.TP
-\fB-keyboard 0         
-PC keyboard layout
-.TP
-\fB-keyboard 1         
-Atari keyboard layout
-
-
-.SS X11 Options
-.TP
-\fB-small
-Runs the emulator in a small window where each Atari 800 pixel is
-represented by one X Window pixel.
-.TP
-\fB-large
-Runs the emulator in a large window where each Atari 800 pixel is
-represented by a 2x2 X Window rectange. This mode is selected by
-default.
-.TP
-\fB-huge
-Runs the emulator in a huge window where each Atari 800 pixel is
-represented by a 3x3 X Window rectange.
-.TP
-\fB-clip_x number-of-pixels
-Sets left offset for clipping.
-.TP
-\fB-clip_width number-of-pixels
-Sets the width of the clipping-area.
-.TP
-\fB-clip_y number-of-pixels
-Sets top offset for clipping.
-.TP
-\fB-clip_height number-of-pixels
-Sets the height of the clipping-area.
-.TP
-\fB-private_cmap
-Tells the Emulator to use its own private colormap.
-.TP
-\fB-fps                
-Show framerate
-.TP
-\fB-sio                
-Show SIO monitor
-.TP
-\fB-x11bug             
-Enable debug code in atari_x11.c
-
-.TP
-\fB-keypad             
-Keypad mode
-
-.SS SDL Options
-.PP
-No SDL-specific options at this time
-
-.PD 0
-
-.SH KEYBOARD, JOYSTICK & PADDLE CONTROLS
-
-.SS Curses
-.TP
-\fBF1
-Built in User Interface
-.TP
-\fBF2
-Option
-.TP
-\fBF3
-Select
-.TP
-\fBF4
-Start
-.TP
-\fBF5
-Warm Reset
-.TP
-\fBF6
-Toggle RAM/ROM between 0x8000 and 0xbfff (PIL Mode)
-.TP
-\fBF7
-Break Key
-.TP
-\fBF8
-Cold Reset
-.TP
-\fBF9
-Exit Emulator
-.TP
-\fBF10
----
-.TP
-\fBF11
----
-.TP
-\fBF12
----
-
-.PP
-Some control have special meaning within curses and should not be used.
-
-    Avoid Control + C, J, M, Q, S and Z
-
-The remaining control characters can be typed. Control characters are
-displayed on the screen with the associated upper case character in bold.
-
-No Joystick or Paddle support in this version.
-
-.SS Falcon
-.TP
-\fBF1
-Built in User Interface
-.TP
-\fBF2
-Option
-.TP
-\fBF3
-Select
-.TP
-\fBF4
-Start
-.TP
-\fBF5
-Warm Reset
-.TP
-\fBShft+F5
-Cold Reset
-.TP
-\fBF6
-Toggle RAM/ROM between 0x8000 and 0xbfff (PIL Mode)
-.TP
-\fBF7
-Break Key
-.TP
-\fBF8
-Enter monitor
-.TP
-\fBF9
-EXIT Emulator
-.TP
-\fBHelp
-HELP key (800XL/130XE)
-
-.PP
-Joystick 0 is operated by the numeric keypad (make sure that the numeric
-keypad has been enabled).
- 
-        7 8 9
-         \\|/
-        4 5 6
-         /|\\
-        1 2 3
- 
-        And 0 is the fire key.
- 
-At the moment it is not possible to use a Paddle with this version.
-
-.SS SVGALIB
-.TP
-\fBF1
-Built in User Interface
-.TP
-\fBF2
-Option
-.TP
-\fBF3
-Select
-.TP
-\fBF4
-Start
-.TP
-\fBF5
-Warm Reset
-.TP
-\fBShft+F5
-Cold Reset
-.TP
-\fBF6
-Toggle RAM/ROM between 0x8000 and 0xbfff (PIL Mode)
-.TP
-\fBF7
-Break Key
-.TP
-\fBF8
-Enter monitor
-.TP
-\fBF9
-Exit Emulator
-.TP
-\fBF10
-Save Screenshot (+Shift=interlaced screenshot)
-.TP
-\fBF11
-Joystick Autofire On/Off
-.TP
-\fBF12
----
-.TP
-\fB`
-This character replaces the CAPS lock key because I have not found a
-way of detecting it. A future solution maybe to automatically issue a
-CAPS lock key when a transition is made between lower and upper case
-keys. i.e. If svgalib return 'a' followed by 'A' it could send 'a'
-'CAPS' 'A' to the Atari.
-
-.PP
-The CTRL+SHIFT keyboard combinations are implemented using the left
-ALT key.
-
-Joystick 0 is operated by the numeric keypad (make sure that the numeric
-keypad has been enabled).
-
-        7 8 9
-         \\|/
-        4 5 6
-         /|\\
-        1 2 3
-
-        And 0 is the fire key.
-
-At the moment it is not possible to use a Paddle with the SVGALIB
-version.
-
-.SS DOS/VGA
-.TP
-\fBF1
-Built in User Interface
-.TP
-\fBF2
-Option Key
-.TP
-\fBF3
-Select Key
-.TP
-\fBF4
-Start Key
-.TP
-\fBF5
-Warm Reset
-.TP
-\fBShft+F5
-Cold Reset
-.TP
-\fBF6
-PIL Mode (Atari800) / Help Key (XL/XE)
-.TP
-\fBF7
-Switch between Emulated joysticks mode and Normal keyboard
-.TP
-\fBF8
-Enter monitor
-.TP
-\fBF9
-EXIT Emulator
-.TP
-\fBF10
-Save Screenshot (+Shift=interlaced screenshot)
-
-.PP
-Control-C terminates the program; to type Control-c, type ALT-c instead.
-` is used as the Atari-Invers key
-
-Joysticks can be either real one connected to game port, or old 8-bit
-digital CX-40 joysticks connected to parallel port or keyboard joysticks
-(try out JOYCFG.EXE).
- 
-At the moment it is not possible to use a Paddle with this version.
-
-.SS X11
-.TP
-\fBF1
-Built in User Interface
-.TP
-\fBF2
-Option
-.TP
-\fBF3
-Select
-.TP
-\fBF4
-Start
-.TP
-\fBF5
-Warm Reset
-.TP
-\fBShft+F5
-Cold Reset
-.TP
-\fBF6
-Toggle RAM/ROM between 0x8000 and 0xbfff (PIL Mode)
-.TP
-\fBF7
-Break Key
-.TP
-\fBF8
----
-.TP
-\fBF9
-Exit Emulator
-.TP
-\fBF10
----
-.TP
-\fBF11
-Vertical Positioning: Scroll Screen Downwards
-.TP
-\fBF12
-Vertical Positioning: Scroll Screen Upwards
-.TP
-\fBALT
-Atari Key (Either ALT Key will work)
-
-.PP
-Joystick 0 is operated by the mouse position relative to the center of
-the screen. The mouse button acts as the trigger.  On Linux, standard
-joysticks are also supported.
-
-Paddle 0 is operated by moving the mouse pointer across the window.
-
-.SS SDL
-.TP
-\fBLALT+f
-switching FULLSCREEN (probably doesn't work in Windows)
-.TP
-\fBLALT+g
-switching WIDTH_MODE (so you can set 320x240)
-.TP
-\fBLALT+b
-switching BLACK-AND-WHITE (feel to power of BW monitor!)
-.TP
-\fBLALT+j
-swapping _keyboard_emulated_ joysticks
-.TP
-\fBLALT+e
-switching bpp (for debug only, will be removed soon)
-
-.PP
-To redefine keys for joystick emulation you must modify SDL_TRIG_* and
-SDL_JOY_* in atari_sdl.c, then recompile Atari800. In source you can
-also turn off sound or change defaults (FULLSCREEN, BW,
-SWAP_JOYSTICKS, WIDTH_MODE).
-
-On Linux, standard joysticks are supported.
-
-
-.PD 1
-
-.SH FILES
-.TP
-\fI/usr/share/atari800/ATARIOSA.ROM\fR
-Atari O/S A
-.TP
-\fI/usr/share/atari800/ATARIOSB.ROM\fR
-Atari O/S B
-.TP
-\fI/usr/share/atari800/ATARIXL.ROM\fR
-Atari 800 XL O/S
-.TP
-\fI/usr/share/atari800/ATARI5200.ROM\fR
-Atari 5200 O/S
-.TP
-\fI/usr/share/atari800/ATARIBAS.ROM\fR
-Atari Basic
-.SH BUGS
-A few programs cause the emulator to enter its built in debugger. The
-reason for this is unknown at the moment.
-
-The SDL port doesn't seem to recognize the
-.B -help
-option.
\ No newline at end of file
diff --git a/games-emulation/atari800/files/1.2.5/atari800.cfg b/games-emulation/atari800/files/1.2.5/atari800.cfg
deleted file mode 100644
index aae3f9b51fa2..000000000000
--- a/games-emulation/atari800/files/1.2.5/atari800.cfg
+++ /dev/null
@@ -1,24 +0,0 @@
-Atari 800 Emulator, Version 1.2.2
-OS/A_ROM=atariosa.rom
-OS/B_ROM=/usr/share/atari800/ATARIOSB.ROM
-XL/XE_ROM=/usr/share/atari800/ATARIXL.ROM
-BASIC_ROM=/usr/share/atari800/ATARIBAS.ROM
-5200_ROM=
-DISK_DIR=
-ROM_DIR=
-H1_DIR=
-H2_DIR=
-H3_DIR=
-H4_DIR=
-HD_READ_ONLY=1
-EXE_DIR=
-STATE_DIR=
-PRINT_COMMAND=lpr %s
-SCREEN_REFRESH_RATIO=1
-MACHINE_TYPE=Atari OS/B
-RAM_SIZE=48
-DEFAULT_TV_MODE=NTSC
-DISABLE_BASIC=1
-ENABLE_SIO_PATCH=1
-ENABLE_H_PATCH=1
-ENABLE_P_PATCH=1
diff --git a/games-emulation/atari800/files/atari800-1.2.2-gentoo.diff b/games-emulation/atari800/files/atari800-1.2.2-gentoo.diff
deleted file mode 100644
index a9df9fdc32ce..000000000000
--- a/games-emulation/atari800/files/atari800-1.2.2-gentoo.diff
+++ /dev/null
@@ -1,12 +0,0 @@
-diff -u -r atari800-1.2.2-ORIG/src/configure atari800-1.2.2/src/configure
---- atari800-1.2.2-ORIG/src/configure	Mon Dec 31 06:16:27 2001
-+++ atari800-1.2.2/src/configure	Mon Feb 25 10:15:47 2002
-@@ -883,7 +883,7 @@
- 	;;
-   mingw32 ) a800_host=win;;
-   msdosdjgpp ) a800_host=dos;;
--  linux ) a800_host=linux;;
-+  *linux* ) a800_host=linux;;
-   mint ) a800_host=falcon;;
- esac
- 
diff --git a/games-emulation/atari800/files/atari800-1.2.5-gentoo.diff b/games-emulation/atari800/files/atari800-1.2.5-gentoo.diff
deleted file mode 100644
index ef1ff01d97f9..000000000000
--- a/games-emulation/atari800/files/atari800-1.2.5-gentoo.diff
+++ /dev/null
@@ -1,43 +0,0 @@
---- atari800-1.2.5/src/pokeysnd.c	2002-12-04 22:21:39.000000000 -0500
-+++ atari800-1.2.4/src/pokeysnd.c	2001-07-22 04:24:47.000000000 -0400
-@@ -1,4 +1,4 @@
--/* $Id: atari800-1.2.5-gentoo.diff,v 1.1 2003/09/09 16:26:49 vapier Exp $ */
-+/* $Id: atari800-1.2.5-gentoo.diff,v 1.1 2003/09/09 16:26:49 vapier Exp $ */
- /*****************************************************************************/
- /*                                                                           */
- /* Module:  POKEY Chip Emulator, V2.4                                        */
-@@ -533,8 +533,8 @@
- 			/* or the channel is off (volume == 0) */
- 			/* or the channel freq is greater than the playback freq */
- 			if ( (AUDC[chan + chip_offs] & VOL_ONLY) ||
--				((AUDC[chan + chip_offs] & VOLUME_MASK) == 0)
--				/* || (Div_n_max[chan + chip_offs] < (Samp_n_max >> 8))*/) {
-+				((AUDC[chan + chip_offs] & VOLUME_MASK) == 0) ||
-+				(Div_n_max[chan + chip_offs] < (Samp_n_max >> 8))) {
- 				/* indicate the channel is 'on' */
- 				Outvol[chan + chip_offs] = 1;
- 
-@@ -542,8 +542,8 @@
- 				if ((chan == CHAN3 && !(AUDCTL[chip] & CH1_FILTER)) ||
- 					(chan == CHAN4 && !(AUDCTL[chip] & CH2_FILTER)) ||
- 					(chan == CHAN1) ||
--					(chan == CHAN2)
--					/* || (Div_n_max[chan + chip_offs] < (Samp_n_max >> 8))*/) {
-+					(chan == CHAN2) ||
-+					(Div_n_max[chan + chip_offs] < (Samp_n_max >> 8))) {
- 					/* and set channel freq to max to reduce processing */
- 					Div_n_max[chan + chip_offs] = 0x7fffffffL;
- 					Div_n_cnt[chan + chip_offs] = 0x7fffffffL;
-@@ -1068,9 +1068,6 @@
- 
- /*
- $Log: not supported by cvs2svn $
- Revision 1.1  2003/01/31 22:01:10  rphillips
- new version. masked. fixes #11605
-
--Revision 1.9  2002/08/26 05:44:22  pfusik
--Adam Bienias's fix for better sound quality
--
- Revision 1.8  2001/07/22 08:24:47  knik
- PURE -> PURETONE to avoid windows headers interference
- 
diff --git a/games-emulation/atari800/files/atari800-1.3.0-security.patch b/games-emulation/atari800/files/atari800-1.3.0-security.patch
deleted file mode 100644
index 4f25ab684a6f..000000000000
--- a/games-emulation/atari800/files/atari800-1.3.0-security.patch
+++ /dev/null
@@ -1,73 +0,0 @@
---- atari.c-orig	2003-02-10 11:22:32.000000000 +0000
-+++ atari.c	2003-07-31 23:58:35.000000000 +0100
-@@ -389,16 +389,57 @@
- 			tv_mode = TV_PAL;
- 		else if (strcmp(argv[i], "-ntsc") == 0)
- 			tv_mode = TV_NTSC;
--		else if (strcmp(argv[i], "-osa_rom") == 0)
--			strcpy(atari_osa_filename, argv[++i]);
--		else if (strcmp(argv[i], "-osb_rom") == 0)
--			strcpy(atari_osb_filename, argv[++i]);
--		else if (strcmp(argv[i], "-xlxe_rom") == 0)
--			strcpy(atari_xlxe_filename, argv[++i]);
--		else if (strcmp(argv[i], "-5200_rom") == 0)
--			strcpy(atari_5200_filename, argv[++i]);
--		else if (strcmp(argv[i], "-basic_rom") == 0)
--			strcpy(atari_basic_filename, argv[++i]);
-+		else if (strcmp(argv[i], "-osa_rom") == 0) {
-+ 		        if ( (i+1) < *argc ) {
-+			          memset(atari_osa_filename,'\0',sizeof(atari_osa_filename));
-+			          strncpy(atari_osa_filename, argv[++i], sizeof(atari_osa_filename)-1);
-+			}
-+			else {
-+			          printf("Missing argument for '-osa_rom'\n");
-+				  return( 1 );
-+			}
-+
-+		}
-+		else if (strcmp(argv[i], "-osb_rom") == 0) {
-+ 		        if ( (i+1) < *argc ) {
-+			          memset(atari_osb_filename,'\0',sizeof(atari_osb_filename));
-+			          strncpy(atari_osb_filename, argv[++i],sizeof(atari_osb_filename)-1);
-+			}
-+			else {
-+			          printf("Missing argument for '-osb_rom'\n");
-+				  return( 1 );
-+			}
-+		}
-+		else if (strcmp(argv[i], "-xlxe_rom") == 0) {
-+ 		        if ( (i+1) < *argc ) {
-+			          memset(atari_xlxe_filename,'\0',sizeof(atari_xlxe_filename));
-+			          strncpy(atari_xlxe_filename, argv[++i], sizeof(atari_xlxe_filename)-1);
-+			}
-+			else {
-+			          printf("Missing argument for '-xlxe_rom'\n");
-+				  return( 1 );
-+			}
-+		}
-+		else if (strcmp(argv[i], "-5200_rom") == 0) {
-+ 		        if ( (i+1) < *argc ) {
-+			          memset(atari_5200_filename,'\0',sizeof(atari_5200_filename));
-+			          strncpy(atari_5200_filename, argv[++i], sizeof(atari_5200_filename)-1);
-+			}
-+			else {
-+			          printf("Missing argument for '-5200_rom'\n");
-+				  return( 1 );
-+			}
-+		}
-+		else if (strcmp(argv[i], "-basic_rom") == 0) {
-+ 		        if ( (i+1) < *argc ) {
-+			          memset(atari_basic_filename,'\0',sizeof(atari_basic_filename));
-+			          strncpy(atari_basic_filename, argv[++i], sizeof(atari_basic_filename)-1);
-+			}
-+			else {
-+			          printf("Missing argument for '-basic_rom'\n");
-+				  return( 1 );
-+			}
-+		}
- 		else if (strcmp(argv[i], "-cart") == 0) {
- 			rom_filename = argv[++i];
- 		}
-
-
-
diff --git a/games-emulation/atari800/files/1.3.0/atari800.cfg b/games-emulation/atari800/files/atari800.cfg
index aae3f9b51fa2..b31c67de0958 100644
--- a/games-emulation/atari800/files/1.3.0/atari800.cfg
+++ b/games-emulation/atari800/files/atari800.cfg
@@ -1,8 +1,8 @@
 Atari 800 Emulator, Version 1.2.2
 OS/A_ROM=atariosa.rom
-OS/B_ROM=/usr/share/atari800/ATARIOSB.ROM
-XL/XE_ROM=/usr/share/atari800/ATARIXL.ROM
-BASIC_ROM=/usr/share/atari800/ATARIBAS.ROM
+OS/B_ROM=/usr/share/games/atari800/ATARIOSB.ROM
+XL/XE_ROM=/usr/share/games/atari800/ATARIXL.ROM
+BASIC_ROM=/usr/share/games/atari800/ATARIBAS.ROM
 5200_ROM=
 DISK_DIR=
 ROM_DIR=
diff --git a/games-emulation/atari800/files/digest-atari800-1.2.2 b/games-emulation/atari800/files/digest-atari800-1.2.2
deleted file mode 100644
index 94e7a21c1990..000000000000
--- a/games-emulation/atari800/files/digest-atari800-1.2.2
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 8e44b40722b4711af7affb135a13960f atari800-1.2.2.tar.gz 462135
-MD5 4dc3b6b4313e9596c4d474785a37b94d xf25.zip 188942
diff --git a/games-emulation/atari800/files/digest-atari800-1.2.5 b/games-emulation/atari800/files/digest-atari800-1.2.5
deleted file mode 100644
index 6e2564a845d6..000000000000
--- a/games-emulation/atari800/files/digest-atari800-1.2.5
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 9f4e90498414c307170b62ae3b8ade18 atari800-1.2.5.tar.gz 482781
-MD5 4dc3b6b4313e9596c4d474785a37b94d xf25.zip 188942
diff --git a/games-emulation/atari800/files/digest-atari800-1.3.0 b/games-emulation/atari800/files/digest-atari800-1.3.0
deleted file mode 100644
index 3a9b403feff4..000000000000
--- a/games-emulation/atari800/files/digest-atari800-1.3.0
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 2998586f3c69f8a7e50439722e30ffc6 atari800-1.3.0.tar.gz 671467
-MD5 4dc3b6b4313e9596c4d474785a37b94d xf25.zip 188942
diff --git a/games-emulation/atari800/files/digest-atari800-1.3.0-r1 b/games-emulation/atari800/files/digest-atari800-1.3.0-r1
deleted file mode 100644
index 3a9b403feff4..000000000000
--- a/games-emulation/atari800/files/digest-atari800-1.3.0-r1
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 2998586f3c69f8a7e50439722e30ffc6 atari800-1.3.0.tar.gz 671467
-MD5 4dc3b6b4313e9596c4d474785a37b94d xf25.zip 188942
diff --git a/games-emulation/atari800/files/digest-atari800-1.3.1 b/games-emulation/atari800/files/digest-atari800-1.3.1
new file mode 100644
index 000000000000..66216aefd98e
--- /dev/null
+++ b/games-emulation/atari800/files/digest-atari800-1.3.1
@@ -0,0 +1,2 @@
+MD5 02c824a4648732a3646d377ee02efd7d atari800-1.3.1.tar.gz 710294
+MD5 4dc3b6b4313e9596c4d474785a37b94d xf25.zip 188942