Added the possibility to mount a tmpfs on /var/lib/run/pure-ftpd (see bug #330563)

Package-Manager: portage-2.2_rc67/cvs/Linux x86_64

2 files changed, 164 insertions, 0 deletions

diff --git a/net-ftp/pure-ftpd/files/pure-ftpd.conf_d-2 b/net-ftp/pure-ftpd/files/pure-ftpd.conf_d-2
new file mode 100644
index 000000000000..502f60c24429
--- /dev/null
+++ b/net-ftp/pure-ftpd/files/pure-ftpd.conf_d-2
@@ -0,0 +1,93 @@
+# Config file for /etc/init.d/pure-ftpd
+##Comment variables out to disable its features, or change the values in it... ##
+
+## This variable must be uncommented in order for the server to start ##
+#IS_CONFIGURED="yes"
+
+## FTP Server,Port (separated by comma) ##
+## If you prefer host names over IP addresses, it's your choice:
+## SERVER="-S ftp.rtchat.com,21"
+## IPv6 addresses are supported.
+## !!! WARNING !!!
+## Using an invalid IP will result in the server not starting,
+## but reporting a correct start!
+## SERVER="-S 192.168.0.1,21"
+## By default binds to all available IPs.
+SERVER="-S 21"
+
+## Number of simultaneous connections in total, and per IP ##
+MAX_CONN="-c 30"
+MAX_CONN_IP="-C 10"
+
+## Start daemonized in background ##
+DAEMON="-B"
+
+## Don't allow uploads if the partition is more full then this var ##
+DISK_FULL="-k 90%"
+
+## If your FTP server is behind a NAT box, uncomment this ##
+#USE_NAT="-N"
+
+## Authentication mechanisms (others are 'pam', ...) ##
+## Further infos can be found in the README file.
+AUTH="-l unix"
+
+## Change the maximum idle time (in minutes) ##
+## If this variable is not defined, it will default to 15 minutes.
+#TIMEOUT="-I <timeout>'"
+
+## Facility used for syslog logging ##
+## If this variable is not defined, it will default to the 'ftp' facility.
+## Logging can be disabled with '-f none'.
+#LOG="-f <facility>"
+
+## Charset conversion support *experimental* ##
+## Only works if USE "charconv" is enabled (only Pure-FTPd >=1.0.21).
+## Set the charset of the filesystem.
+# CHARCONV="--fscharset <charset>"
+
+## If you want to process each file uploaded through Pure-FTPd, enter the name
+## of the script that should process the files below.
+## man pure-uploadscript to learn more about how to write this script.
+# UPLOADSCRIPT="/path/to/uploadscript"
+
+## Misc. Others ##
+MISC_OTHER="-A -x -j -R -Z"
+
+#
+# Use these inside $MISC_OTHER
+# More can be found on "http://download.pureftpd.org/pub/pure-ftpd/doc/README"
+#
+# -A [ chroot() everyone, but root ]
+# -e [ Only allow anonymous users ]
+# -E [ Only allow authenticated users. Anonymous logins are prohibited. ]
+# -i [ Disallow upload for anonymous users, whatever directory perms are ]
+# -j [ If the home directory of a user doesn't exist, auto-create it ]
+# -M [ Allow anonymous users to create directories. ]
+# -R [ Disallow users (even non-anonymous ones) usage of the CHMOD command ]
+# -x [ In  normal  operation mode, authenticated users can read/write
+#	files beginning with a dot ('.'). Anonymous users can't, for security reasons
+#	(like changing banners or a forgotten .rhosts). When '-x' is used, authenticated
+#	users can download dot-files, but not overwrite/create  them,  even  if they own
+#	them. ]
+# -X [ This  flag  is  identical  to  the  previous one (writing
+#       dot-files is prohibited), but in addition, users can't even *read* files and
+#       directories beginning with a dot (like "cd .ssh"). ]
+# -D [ List files beginning with a dot ('.') even when the client doesn't
+#      append the '-a' option to the list command. A workaround for badly
+#      configured FTP clients. ]
+# -G [ Disallow renaming. ]
+# -d [ Send various debugging messages to the syslog. ONLY for DEBUG ]
+# -F <fortune file> [ Display a fortune cookie on login. Check the README file ]
+# -H [ By default, fully-qualified host names are logged. The '-H' flag avoids host names resolution. ]
+
+
+# Some filesystems don't like accesses being memory mapped. This happens for
+# example with ftpwho on JFFS2 filesystems. If you happen to have such a 
+# filesystem on /var set TMPFS_MOUNT to "true".
+TMPFS_MOUNT="false"
+
+# Special mount options (like nosuid or nodev) for the tmpfs mount can be added 
+# here. Several options must be separated by comma: "nodev,nosuid"
+#TMPFS_OPTS=""
+
diff --git a/net-ftp/pure-ftpd/files/pure-ftpd.rc10 b/net-ftp/pure-ftpd/files/pure-ftpd.rc10
new file mode 100644
index 000000000000..768c565efda6
--- /dev/null
+++ b/net-ftp/pure-ftpd/files/pure-ftpd.rc10
@@ -0,0 +1,71 @@
+#!/sbin/runscript
+# Copyright 1999-2010 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-ftp/pure-ftpd/files/pure-ftpd.rc10,v 1.1 2010/08/19 08:07:13 polynomial-c Exp $
+
+ftpd_pidfile="/var/run/pure-ftpd.pid"
+script_pidfile="/var/run/pure-uploadscript.pid"
+ftpd_rundir="/var/lib/run/pure-ftpd"
+
+depend() {
+	need net
+}
+
+checkconfig() {
+	if [ -z "$IS_CONFIGURED" ] ; then
+		eerror "You need to setup /etc/conf.d/pure-ftpd first!"
+		return 1
+	fi
+}
+
+start() {
+	checkconfig || return 1
+
+	if ${TMPFS_MOUNT:-false} && grep -q tmpfs /proc/filesystems ; then
+		[ -n "${TMPFS_OPTS}" ] && MOUNT_OPTS="-o ${TMPFS_OPTS}"
+		einfo "Mounting tmpfs on ${ftpd_rundir}"
+		mount ${MOUNT_OPTS} -t tmpfs tmpfs ${ftpd_rundir} \
+			|| eerror "Unable to mount tmpfs"
+	fi
+
+	# only works with openrc
+	WAIT=""
+	if [ -f /etc/init.d/sysfs ]; then
+		WAIT="--wait 100"
+	fi
+
+	UPSCRIPT=""
+	OKNODO=""
+	if [ -n "$UPLOADSCRIPT" ] ; then
+		UPSCRIPT="--uploadscript"
+		OKNODO="--oknodo"
+	fi
+	ebegin "Starting Pure-FTPd"
+	start-stop-daemon --start --quiet --pidfile ${ftpd_pidfile} $OKNODO --exec /usr/sbin/pure-ftpd ${WAIT} -- --pidfile ${ftpd_pidfile} $SERVER $MAX_CONN $MAX_CONN_IP $DAEMON $DISK_FULL $USE_NAT $AUTH $LOG $TIMEOUT $CHARCONV $MISC_OTHER $UPSCRIPT
+	result=$?
+	if [ $result -ne 0 ] ; then
+		eend 1 "Could not launch Pure-FTPd"
+	else
+		eend $result
+		if [ -n "$UPLOADSCRIPT" ] ; then
+			ebegin "Starting Pure-FTPd upload script"
+			start-stop-daemon --start --quiet --make-pidfile --pidfile ${script_pidfile} --exec /usr/sbin/pure-uploadscript --background ${WAIT} -- -r $UPLOADSCRIPT
+			eend $?
+		fi
+	fi
+}
+
+stop() {
+	ebegin "Stopping Pure-FTPd"
+	start-stop-daemon --stop --retry 20 --quiet --pidfile ${ftpd_pidfile}
+	eend $?
+	if [ -n "$UPLOADSCRIPT" ] ; then
+		ebegin "Stopping Pure-FTPd upload script"
+		start-stop-daemon --stop --retry 20 --quiet --pidfile ${script_pidfile}
+		eend $?
+	fi
+
+	if ${TMPFS_MOUNT:-false} && mount | grep -q ${ftpd_rundir} ; then
+		umount ${ftpd_rundir} >/dev/null 2>&1
+	fi
+}