old

6 files changed, 0 insertions, 1464 deletions

diff --git a/sys-apps/busybox/busybox-1.11.1.ebuild b/sys-apps/busybox/busybox-1.11.1.ebuild
deleted file mode 100644
index 3a16625334ff..000000000000
--- a/sys-apps/busybox/busybox-1.11.1.ebuild
+++ /dev/null
@@ -1,243 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/busybox/busybox-1.11.1.ebuild,v 1.12 2008/11/20 21:56:26 jer Exp $
-
-inherit eutils flag-o-matic savedconfig toolchain-funcs
-
-################################################################################
-# BUSYBOX ALTERNATE CONFIG MINI-HOWTO
-#
-# Busybox can be modified in many different ways. Here's a few ways to do it:
-#
-# (1) Emerge busybox with FEATURES=keepwork so the work directory won't
-#     get erased afterwards. Add a definition like ROOT=/my/root/path to the
-#     start of the line if you're installing to somewhere else than the root
-#     directory. This command will save the default configuration to
-#     ${PORTAGE_CONFIGROOT} (or ${ROOT} if ${PORTAGE_CONFIGROOT} is not
-#     defined), and it will tell you that it has done this. Note the location
-#     where the config file was saved.
-#
-#     FEATURES=keepwork USE=savedconfig emerge busybox
-#
-# (2) Go to the work directory and change the configuration of busybox using its
-#     menuconfig feature.
-#
-#     cd /var/tmp/portage/busybox*/work/busybox-*
-#     make menuconfig
-#
-# (3) Save your configuration to the default location and copy it to the
-#     one of the locations listed in /usr/portage/eclass/savedconfig.eclass
-#
-# (4) Emerge busybox with USE=savedconfig to use the configuration file you
-#     just generated.
-#
-################################################################################
-#
-# (1) Alternatively skip the above steps and simply emerge busybox without
-#     USE=savedconfig.
-#
-# (2) Edit the file it saves by hand. ${ROOT}"/etc/portage/savedconfig/${CATEGORY}/${PF}
-#
-# (3) Remerge busybox as using USE=savedconfig.
-#
-################################################################################
-
-#SNAPSHOT=20040726
-SNAPSHOT=""
-
-DESCRIPTION="Utilities for rescue and embedded systems"
-HOMEPAGE="http://www.busybox.net/"
-if [[ -n ${SNAPSHOT} ]] ; then
-	MY_P=${PN}
-	SRC_URI="http://www.busybox.net/downloads/snapshots/${PN}-${SNAPSHOT}.tar.bz2"
-else
-	MY_P=${PN}-${PV/_/-}
-	SRC_URI="http://www.busybox.net/downloads/${MY_P}.tar.bz2"
-fi
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="alpha amd64 arm hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc x86"
-IUSE="debug make-symlinks pam selinux static"
-RESTRICT="test"
-
-DEPEND="selinux? ( sys-libs/libselinux )
-	pam? ( sys-libs/pam )"
-
-S=${WORKDIR}/${MY_P}
-
-busybox_config_option() {
-	case $1 in
-		y) sed -i -e "s:.*CONFIG_$2.*set:CONFIG_$2=y:g" .config;;
-		n) sed -i -e "s:CONFIG_$2=y:# CONFIG_$2 is not set:g" .config;;
-		*) use $1 \
-		       && busybox_config_option y $2 \
-		       || busybox_config_option n $2
-		   return 0
-		   ;;
-	esac
-	einfo $(grep "CONFIG_$2[= ]" .config)
-}
-
-src_unpack() {
-	unset KBUILD_OUTPUT #88088
-
-	unpack ${MY_P}.tar.bz2
-	cd "${S}"
-
-	# patches go here!
-	epatch "${FILESDIR}"/busybox-1.11.1-bb.patch
-	epatch "${FILESDIR}"/busybox-1.11.1-ppc-ifile.patch
-
-	# include this upstream later..
-	epatch "${FILESDIR}"/busybox-devmem.patch
-
-	epatch "${FILESDIR}"/busybox-1.10.1-mdev-exec.patch
-
-	# work around broken ass powerpc compilers
-	use ppc64 && append-flags -mminimal-toc
-	# flag cleanup
-	sed -i -r \
-		-e 's:[[:space:]]?-(Werror|Os|falign-(functions|jumps|loops|labels)=1|fomit-frame-pointer)\>::g' \
-		Makefile.flags || die
-	sed -i '/^#error Aborting compilation./d' applets/applets.c || die
-	use elibc_glibc && sed -i 's:-Wl,--gc-sections::' Makefile
-	cat <<-EOF >> Makefile.flags
-	CROSS_COMPILE := ${CHOST}-
-	HOSTCC := $(tc-getBUILD_CC)
-	SKIP_STRIP = y
-	EOF
-
-	# check for a busybox config before making one of our own.
-	# if one exist lets return and use it.
-
-	restore_config .config
-	if [ -f .config ]; then
-		yes "" | emake -j1 oldconfig > /dev/null
-		return 0
-	else
-		ewarn "Could not locate user configfile, so we will save a default one"
-	fi
-
-	# setup the config file
-	emake -j1 allyesconfig > /dev/null
-	busybox_config_option n DMALLOC
-	busybox_config_option n FEATURE_SUID_CONFIG
-	busybox_config_option n BUILD_AT_ONCE
-	busybox_config_option n BUILD_LIBBUSYBOX
-	busybox_config_option n NOMMU
-	busybox_config_option n MONOTONIC_SYSCALL
-
-	# If these are not set and we are using a uclibc/busybox setup
-	# all calls to system() will fail.
-	busybox_config_option y FEATURE_SH_IS_ASH
-	busybox_config_option n FEATURE_SH_IS_NONE
-
-	if use static && use pam ; then
-		ewarn "You cannot have USE='static pam'.  Assuming static is more important."
-	fi
-	use static \
-		&& busybox_config_option n PAM \
-		|| busybox_config_option pam PAM
-	busybox_config_option static STATIC
-	busybox_config_option debug DEBUG
-	use debug \
-		&& busybox_config_option y NO_DEBUG_LIB \
-		&& busybox_config_option n DMALLOC \
-		&& busybox_config_option n EFENCE
-
-	busybox_config_option selinux SELINUX
-
-	# default a bunch of uncommon options to off
-	for opt in LOCALE_SUPPORT TFTP FTP{GET,PUT} IPCALC TFTP HUSH \
-		LASH MSH INETD DPKG RPM2CPIO RPM FOLD LOGNAME OD CRONTAB \
-		UUDECODE UUENCODE SULOGIN DC DEBUG_YANK_SUSv2 DEBUG_INIT \
-		DEBUG_CROND_OPTION FEATURE_UDHCP_DEBUG TASKSET INOTIFYD
-	do
-		busybox_config_option n ${opt}
-	done
-
-	emake -j1 oldconfig > /dev/null
-}
-
-src_compile() {
-	unset KBUILD_OUTPUT #88088
-
-	emake busybox || die "build failed"
-	if ! use static && ! use pam ; then
-		mv busybox_unstripped{,.bak}
-		emake CONFIG_STATIC=y busybox || die "static build failed"
-		mv busybox_unstripped bb
-		mv busybox_unstripped{.bak,}
-	fi
-}
-
-src_install() {
-	unset KBUILD_OUTPUT #88088
-	save_config .config
-
-	into /
-	newbin busybox_unstripped busybox || die
-	if use static || use pam ; then
-		dosym busybox /bin/bb || die
-		dosym bb /bin/busybox.static || die
-	else
-		dobin bb || die
-	fi
-
-	insinto /$(get_libdir)/rcscripts/addons
-	doins "${FILESDIR}"/mdev-start.sh || die
-
-	# bundle up the symlink files for use later
-	emake install || die
-	rm _install/bin/busybox
-	tar cf busybox-links.tar -C _install . || : #;die
-	insinto /usr/share/${PN}
-	doins busybox-links.tar || die
-	newins .config ${PF}.config || die
-
-	dodoc AUTHORS README TODO
-
-	cd docs || die
-	docinto txt
-	dodoc *.txt
-	docinto pod
-	dodoc *.pod
-	dohtml *.html *.sgml
-
-	cd ../examples || die
-	docinto examples
-	dodoc inittab depmod.pl *.conf *.script undeb unrpm
-
-	cd bootfloppy || die
-	docinto bootfloppy
-	dodoc $(find . -type f)
-}
-
-pkg_preinst() {
-	if use make-symlinks && [[ ! ${VERY_BRAVE_OR_VERY_DUMB} == "yes" ]] && [[ ${ROOT} == "/" ]] ; then
-		ewarn "setting USE=make-symlinks and emerging to / is very dangerous."
-		ewarn "it WILL overwrite lots of system programs like: ls bash awk grep (bug 60805 for full list)."
-		ewarn "If you are creating a binary only and not merging this is probably ok."
-		ewarn "set env VERY_BRAVE_OR_VERY_DUMB=yes if this is realy what you want."
-		die "silly options will destroy your system"
-	fi
-
-	if use make-symlinks ; then
-		mv "${D}"/usr/share/${PN}/busybox-links.tar "${T}"/ || die
-	fi
-}
-
-pkg_postinst() {
-	if use make-symlinks ; then
-		cd "${T}" || die
-		mkdir _install
-		tar xf busybox-links.tar -C _install || die
-		cp -vpPR _install/* "${ROOT}"/ || die "copying links for ${x} failed"
-	fi
-
-	echo
-	einfo "This ebuild has support for user defined configs"
-	einfo "Please read this ebuild for more details and re-emerge as needed"
-	einfo "if you want to add or remove functionality for ${PN}"
-	echo
-}
diff --git a/sys-apps/busybox/busybox-1.11.3.ebuild b/sys-apps/busybox/busybox-1.11.3.ebuild
deleted file mode 100644
index 341c697c2a0b..000000000000
--- a/sys-apps/busybox/busybox-1.11.3.ebuild
+++ /dev/null
@@ -1,242 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/busybox/busybox-1.11.3.ebuild,v 1.6 2008/12/07 10:16:05 vapier Exp $
-
-inherit eutils flag-o-matic savedconfig toolchain-funcs
-
-################################################################################
-# BUSYBOX ALTERNATE CONFIG MINI-HOWTO
-#
-# Busybox can be modified in many different ways. Here's a few ways to do it:
-#
-# (1) Emerge busybox with FEATURES=keepwork so the work directory won't
-#     get erased afterwards. Add a definition like ROOT=/my/root/path to the
-#     start of the line if you're installing to somewhere else than the root
-#     directory. This command will save the default configuration to
-#     ${PORTAGE_CONFIGROOT} (or ${ROOT} if ${PORTAGE_CONFIGROOT} is not
-#     defined), and it will tell you that it has done this. Note the location
-#     where the config file was saved.
-#
-#     FEATURES=keepwork USE=savedconfig emerge busybox
-#
-# (2) Go to the work directory and change the configuration of busybox using its
-#     menuconfig feature.
-#
-#     cd /var/tmp/portage/busybox*/work/busybox-*
-#     make menuconfig
-#
-# (3) Save your configuration to the default location and copy it to the
-#     one of the locations listed in /usr/portage/eclass/savedconfig.eclass
-#
-# (4) Emerge busybox with USE=savedconfig to use the configuration file you
-#     just generated.
-#
-################################################################################
-#
-# (1) Alternatively skip the above steps and simply emerge busybox without
-#     USE=savedconfig.
-#
-# (2) Edit the file it saves by hand. ${ROOT}"/etc/portage/savedconfig/${CATEGORY}/${PF}
-#
-# (3) Remerge busybox as using USE=savedconfig.
-#
-################################################################################
-
-#SNAPSHOT=20040726
-SNAPSHOT=""
-
-DESCRIPTION="Utilities for rescue and embedded systems"
-HOMEPAGE="http://www.busybox.net/"
-if [[ -n ${SNAPSHOT} ]] ; then
-	MY_P=${PN}
-	SRC_URI="http://www.busybox.net/downloads/snapshots/${PN}-${SNAPSHOT}.tar.bz2"
-else
-	MY_P=${PN}-${PV/_/-}
-	SRC_URI="http://www.busybox.net/downloads/${MY_P}.tar.bz2"
-fi
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="alpha ~amd64 arm ~hppa ia64 m68k ~mips ~ppc ~ppc64 s390 sh sparc x86"
-IUSE="debug make-symlinks pam selinux static"
-RESTRICT="test"
-
-DEPEND="selinux? ( sys-libs/libselinux )
-	pam? ( sys-libs/pam )"
-
-S=${WORKDIR}/${MY_P}
-
-busybox_config_option() {
-	case $1 in
-		y) sed -i -e "s:.*CONFIG_$2.*set:CONFIG_$2=y:g" .config;;
-		n) sed -i -e "s:CONFIG_$2=y:# CONFIG_$2 is not set:g" .config;;
-		*) use $1 \
-		       && busybox_config_option y $2 \
-		       || busybox_config_option n $2
-		   return 0
-		   ;;
-	esac
-	einfo $(grep "CONFIG_$2[= ]" .config)
-}
-
-src_unpack() {
-	unset KBUILD_OUTPUT #88088
-
-	unpack ${MY_P}.tar.bz2
-	cd "${S}"
-
-	# patches go here!
-	epatch "${FILESDIR}"/busybox-1.11.1-bb.patch
-
-	# include this upstream later..
-	epatch "${FILESDIR}"/busybox-devmem.patch
-
-	epatch "${FILESDIR}"/busybox-1.10.1-mdev-exec.patch
-
-	# work around broken ass powerpc compilers
-	use ppc64 && append-flags -mminimal-toc
-	# flag cleanup
-	sed -i -r \
-		-e 's:[[:space:]]?-(Werror|Os|falign-(functions|jumps|loops|labels)=1|fomit-frame-pointer)\>::g' \
-		Makefile.flags || die
-	sed -i '/^#error Aborting compilation./d' applets/applets.c || die
-	use elibc_glibc && sed -i 's:-Wl,--gc-sections::' Makefile
-	cat <<-EOF >> Makefile.flags
-	CROSS_COMPILE := ${CHOST}-
-	HOSTCC := $(tc-getBUILD_CC)
-	SKIP_STRIP = y
-	EOF
-
-	# check for a busybox config before making one of our own.
-	# if one exist lets return and use it.
-
-	restore_config .config
-	if [ -f .config ]; then
-		yes "" | emake -j1 oldconfig > /dev/null
-		return 0
-	else
-		ewarn "Could not locate user configfile, so we will save a default one"
-	fi
-
-	# setup the config file
-	emake -j1 allyesconfig > /dev/null
-	busybox_config_option n DMALLOC
-	busybox_config_option n FEATURE_SUID_CONFIG
-	busybox_config_option n BUILD_AT_ONCE
-	busybox_config_option n BUILD_LIBBUSYBOX
-	busybox_config_option n NOMMU
-	busybox_config_option n MONOTONIC_SYSCALL
-
-	# If these are not set and we are using a uclibc/busybox setup
-	# all calls to system() will fail.
-	busybox_config_option y FEATURE_SH_IS_ASH
-	busybox_config_option n FEATURE_SH_IS_NONE
-
-	if use static && use pam ; then
-		ewarn "You cannot have USE='static pam'.  Assuming static is more important."
-	fi
-	use static \
-		&& busybox_config_option n PAM \
-		|| busybox_config_option pam PAM
-	busybox_config_option static STATIC
-	busybox_config_option debug DEBUG
-	use debug \
-		&& busybox_config_option y NO_DEBUG_LIB \
-		&& busybox_config_option n DMALLOC \
-		&& busybox_config_option n EFENCE
-
-	busybox_config_option selinux SELINUX
-
-	# default a bunch of uncommon options to off
-	for opt in LOCALE_SUPPORT TFTP FTP{GET,PUT} IPCALC TFTP HUSH \
-		LASH MSH INETD DPKG RPM2CPIO RPM FOLD LOGNAME OD CRONTAB \
-		UUDECODE UUENCODE SULOGIN DC DEBUG_YANK_SUSv2 DEBUG_INIT \
-		DEBUG_CROND_OPTION FEATURE_UDHCP_DEBUG TASKSET INOTIFYD
-	do
-		busybox_config_option n ${opt}
-	done
-
-	emake -j1 oldconfig > /dev/null
-}
-
-src_compile() {
-	unset KBUILD_OUTPUT #88088
-
-	emake busybox || die "build failed"
-	if ! use static && ! use pam ; then
-		mv busybox_unstripped{,.bak}
-		emake CONFIG_STATIC=y busybox || die "static build failed"
-		mv busybox_unstripped bb
-		mv busybox_unstripped{.bak,}
-	fi
-}
-
-src_install() {
-	unset KBUILD_OUTPUT #88088
-	save_config .config
-
-	into /
-	newbin busybox_unstripped busybox || die
-	if use static || use pam ; then
-		dosym busybox /bin/bb || die
-		dosym bb /bin/busybox.static || die
-	else
-		dobin bb || die
-	fi
-
-	insinto /$(get_libdir)/rcscripts/addons
-	doins "${FILESDIR}"/mdev-start.sh || die
-
-	# bundle up the symlink files for use later
-	emake install || die
-	rm _install/bin/busybox
-	tar cf busybox-links.tar -C _install . || : #;die
-	insinto /usr/share/${PN}
-	doins busybox-links.tar || die
-	newins .config ${PF}.config || die
-
-	dodoc AUTHORS README TODO
-
-	cd docs || die
-	docinto txt
-	dodoc *.txt
-	docinto pod
-	dodoc *.pod
-	dohtml *.html *.sgml
-
-	cd ../examples || die
-	docinto examples
-	dodoc inittab depmod.pl *.conf *.script undeb unrpm
-
-	cd bootfloppy || die
-	docinto bootfloppy
-	dodoc $(find . -type f)
-}
-
-pkg_preinst() {
-	if use make-symlinks && [[ ! ${VERY_BRAVE_OR_VERY_DUMB} == "yes" ]] && [[ ${ROOT} == "/" ]] ; then
-		ewarn "setting USE=make-symlinks and emerging to / is very dangerous."
-		ewarn "it WILL overwrite lots of system programs like: ls bash awk grep (bug 60805 for full list)."
-		ewarn "If you are creating a binary only and not merging this is probably ok."
-		ewarn "set env VERY_BRAVE_OR_VERY_DUMB=yes if this is realy what you want."
-		die "silly options will destroy your system"
-	fi
-
-	if use make-symlinks ; then
-		mv "${D}"/usr/share/${PN}/busybox-links.tar "${T}"/ || die
-	fi
-}
-
-pkg_postinst() {
-	if use make-symlinks ; then
-		cd "${T}" || die
-		mkdir _install
-		tar xf busybox-links.tar -C _install || die
-		cp -vpPR _install/* "${ROOT}"/ || die "copying links for ${x} failed"
-	fi
-
-	echo
-	einfo "This ebuild has support for user defined configs"
-	einfo "Please read this ebuild for more details and re-emerge as needed"
-	einfo "if you want to add or remove functionality for ${PN}"
-	echo
-}
diff --git a/sys-apps/busybox/busybox-1.12.0.ebuild b/sys-apps/busybox/busybox-1.12.0.ebuild
deleted file mode 100644
index 04d1dd8f266a..000000000000
--- a/sys-apps/busybox/busybox-1.12.0.ebuild
+++ /dev/null
@@ -1,242 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/busybox/busybox-1.12.0.ebuild,v 1.5 2008/11/20 21:56:26 jer Exp $
-
-inherit eutils flag-o-matic savedconfig toolchain-funcs
-
-################################################################################
-# BUSYBOX ALTERNATE CONFIG MINI-HOWTO
-#
-# Busybox can be modified in many different ways. Here's a few ways to do it:
-#
-# (1) Emerge busybox with FEATURES=keepwork so the work directory won't
-#     get erased afterwards. Add a definition like ROOT=/my/root/path to the
-#     start of the line if you're installing to somewhere else than the root
-#     directory. This command will save the default configuration to
-#     ${PORTAGE_CONFIGROOT} (or ${ROOT} if ${PORTAGE_CONFIGROOT} is not
-#     defined), and it will tell you that it has done this. Note the location
-#     where the config file was saved.
-#
-#     FEATURES=keepwork USE=savedconfig emerge busybox
-#
-# (2) Go to the work directory and change the configuration of busybox using its
-#     menuconfig feature.
-#
-#     cd /var/tmp/portage/busybox*/work/busybox-*
-#     make menuconfig
-#
-# (3) Save your configuration to the default location and copy it to the
-#     one of the locations listed in /usr/portage/eclass/savedconfig.eclass
-#
-# (4) Emerge busybox with USE=savedconfig to use the configuration file you
-#     just generated.
-#
-################################################################################
-#
-# (1) Alternatively skip the above steps and simply emerge busybox without
-#     USE=savedconfig.
-#
-# (2) Edit the file it saves by hand. ${ROOT}"/etc/portage/savedconfig/${CATEGORY}/${PF}
-#
-# (3) Remerge busybox as using USE=savedconfig.
-#
-################################################################################
-
-#SNAPSHOT=20040726
-SNAPSHOT=""
-
-DESCRIPTION="Utilities for rescue and embedded systems"
-HOMEPAGE="http://www.busybox.net/"
-if [[ -n ${SNAPSHOT} ]] ; then
-	MY_P=${PN}
-	SRC_URI="http://www.busybox.net/downloads/snapshots/${PN}-${SNAPSHOT}.tar.bz2"
-else
-	MY_P=${PN}-${PV/_/-}
-	SRC_URI="http://www.busybox.net/downloads/${MY_P}.tar.bz2"
-fi
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86"
-IUSE="debug make-symlinks pam selinux static"
-RESTRICT="test"
-
-DEPEND="selinux? ( sys-libs/libselinux )
-	pam? ( sys-libs/pam )"
-
-S=${WORKDIR}/${MY_P}
-
-busybox_config_option() {
-	case $1 in
-		y) sed -i -e "s:.*CONFIG_$2.*set:CONFIG_$2=y:g" .config;;
-		n) sed -i -e "s:CONFIG_$2=y:# CONFIG_$2 is not set:g" .config;;
-		*) use $1 \
-		       && busybox_config_option y $2 \
-		       || busybox_config_option n $2
-		   return 0
-		   ;;
-	esac
-	einfo $(grep "CONFIG_$2[= ]" .config)
-}
-
-src_unpack() {
-	unset KBUILD_OUTPUT #88088
-
-	unpack ${MY_P}.tar.bz2
-	cd "${S}"
-
-	# patches go here!
-	epatch "${FILESDIR}"/busybox-1.11.1-bb.patch
-
-	# include this upstream later..
-	epatch "${FILESDIR}"/busybox-devmem.patch
-
-	epatch "${FILESDIR}"/busybox-1.12.0-mdev-exec.patch
-
-	# work around broken ass powerpc compilers
-	use ppc64 && append-flags -mminimal-toc
-	# flag cleanup
-	sed -i -r \
-		-e 's:[[:space:]]?-(Werror|Os|falign-(functions|jumps|loops|labels)=1|fomit-frame-pointer)\>::g' \
-		Makefile.flags || die
-	sed -i '/^#error Aborting compilation./d' applets/applets.c || die
-	use elibc_glibc && sed -i 's:-Wl,--gc-sections::' Makefile
-	cat <<-EOF >> Makefile.flags
-	CROSS_COMPILE := ${CHOST}-
-	HOSTCC := $(tc-getBUILD_CC)
-	SKIP_STRIP = y
-	EOF
-
-	# check for a busybox config before making one of our own.
-	# if one exist lets return and use it.
-
-	restore_config .config
-	if [ -f .config ]; then
-		yes "" | emake -j1 oldconfig > /dev/null
-		return 0
-	else
-		ewarn "Could not locate user configfile, so we will save a default one"
-	fi
-
-	# setup the config file
-	emake -j1 allyesconfig > /dev/null
-	busybox_config_option n DMALLOC
-	busybox_config_option n FEATURE_SUID_CONFIG
-	busybox_config_option n BUILD_AT_ONCE
-	busybox_config_option n BUILD_LIBBUSYBOX
-	busybox_config_option n NOMMU
-	busybox_config_option n MONOTONIC_SYSCALL
-
-	# If these are not set and we are using a uclibc/busybox setup
-	# all calls to system() will fail.
-	busybox_config_option y FEATURE_SH_IS_ASH
-	busybox_config_option n FEATURE_SH_IS_NONE
-
-	if use static && use pam ; then
-		ewarn "You cannot have USE='static pam'.  Assuming static is more important."
-	fi
-	use static \
-		&& busybox_config_option n PAM \
-		|| busybox_config_option pam PAM
-	busybox_config_option static STATIC
-	busybox_config_option debug DEBUG
-	use debug \
-		&& busybox_config_option y NO_DEBUG_LIB \
-		&& busybox_config_option n DMALLOC \
-		&& busybox_config_option n EFENCE
-
-	busybox_config_option selinux SELINUX
-
-	# default a bunch of uncommon options to off
-	for opt in LOCALE_SUPPORT TFTP FTP{GET,PUT} IPCALC TFTP HUSH \
-		LASH MSH INETD DPKG RPM2CPIO RPM FOLD LOGNAME OD CRONTAB \
-		UUDECODE UUENCODE SULOGIN DC DEBUG_YANK_SUSv2 DEBUG_INIT \
-		DEBUG_CROND_OPTION FEATURE_UDHCP_DEBUG TASKSET INOTIFYD
-	do
-		busybox_config_option n ${opt}
-	done
-
-	emake -j1 oldconfig > /dev/null
-}
-
-src_compile() {
-	unset KBUILD_OUTPUT #88088
-
-	emake busybox || die "build failed"
-	if ! use static && ! use pam ; then
-		mv busybox_unstripped{,.bak}
-		emake CONFIG_STATIC=y busybox || die "static build failed"
-		mv busybox_unstripped bb
-		mv busybox_unstripped{.bak,}
-	fi
-}
-
-src_install() {
-	unset KBUILD_OUTPUT #88088
-	save_config .config
-
-	into /
-	newbin busybox_unstripped busybox || die
-	if use static || use pam ; then
-		dosym busybox /bin/bb || die
-		dosym bb /bin/busybox.static || die
-	else
-		dobin bb || die
-	fi
-
-	insinto /$(get_libdir)/rcscripts/addons
-	doins "${FILESDIR}"/mdev-start.sh || die
-
-	# bundle up the symlink files for use later
-	emake install || die
-	rm _install/bin/busybox
-	tar cf busybox-links.tar -C _install . || : #;die
-	insinto /usr/share/${PN}
-	doins busybox-links.tar || die
-	newins .config ${PF}.config || die
-
-	dodoc AUTHORS README TODO
-
-	cd docs || die
-	docinto txt
-	dodoc *.txt
-	docinto pod
-	dodoc *.pod
-	dohtml *.html *.sgml
-
-	cd ../examples || die
-	docinto examples
-	dodoc inittab depmod.pl *.conf *.script undeb unrpm
-
-	cd bootfloppy || die
-	docinto bootfloppy
-	dodoc $(find . -type f)
-}
-
-pkg_preinst() {
-	if use make-symlinks && [[ ! ${VERY_BRAVE_OR_VERY_DUMB} == "yes" ]] && [[ ${ROOT} == "/" ]] ; then
-		ewarn "setting USE=make-symlinks and emerging to / is very dangerous."
-		ewarn "it WILL overwrite lots of system programs like: ls bash awk grep (bug 60805 for full list)."
-		ewarn "If you are creating a binary only and not merging this is probably ok."
-		ewarn "set env VERY_BRAVE_OR_VERY_DUMB=yes if this is realy what you want."
-		die "silly options will destroy your system"
-	fi
-
-	if use make-symlinks ; then
-		mv "${D}"/usr/share/${PN}/busybox-links.tar "${T}"/ || die
-	fi
-}
-
-pkg_postinst() {
-	if use make-symlinks ; then
-		cd "${T}" || die
-		mkdir _install
-		tar xf busybox-links.tar -C _install || die
-		cp -vpPR _install/* "${ROOT}"/ || die "copying links for ${x} failed"
-	fi
-
-	echo
-	einfo "This ebuild has support for user defined configs"
-	einfo "Please read this ebuild for more details and re-emerge as needed"
-	einfo "if you want to add or remove functionality for ${PN}"
-	echo
-}
diff --git a/sys-apps/busybox/busybox-1.12.1.ebuild b/sys-apps/busybox/busybox-1.12.1.ebuild
deleted file mode 100644
index ddd97f209fc6..000000000000
--- a/sys-apps/busybox/busybox-1.12.1.ebuild
+++ /dev/null
@@ -1,243 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/busybox/busybox-1.12.1.ebuild,v 1.4 2008/11/20 21:56:26 jer Exp $
-
-inherit eutils flag-o-matic savedconfig toolchain-funcs
-
-################################################################################
-# BUSYBOX ALTERNATE CONFIG MINI-HOWTO
-#
-# Busybox can be modified in many different ways. Here's a few ways to do it:
-#
-# (1) Emerge busybox with FEATURES=keepwork so the work directory won't
-#     get erased afterwards. Add a definition like ROOT=/my/root/path to the
-#     start of the line if you're installing to somewhere else than the root
-#     directory. This command will save the default configuration to
-#     ${PORTAGE_CONFIGROOT} (or ${ROOT} if ${PORTAGE_CONFIGROOT} is not
-#     defined), and it will tell you that it has done this. Note the location
-#     where the config file was saved.
-#
-#     FEATURES=keepwork USE=savedconfig emerge busybox
-#
-# (2) Go to the work directory and change the configuration of busybox using its
-#     menuconfig feature.
-#
-#     cd /var/tmp/portage/busybox*/work/busybox-*
-#     make menuconfig
-#
-# (3) Save your configuration to the default location and copy it to the
-#     one of the locations listed in /usr/portage/eclass/savedconfig.eclass
-#
-# (4) Emerge busybox with USE=savedconfig to use the configuration file you
-#     just generated.
-#
-################################################################################
-#
-# (1) Alternatively skip the above steps and simply emerge busybox without
-#     USE=savedconfig.
-#
-# (2) Edit the file it saves by hand. ${ROOT}"/etc/portage/savedconfig/${CATEGORY}/${PF}
-#
-# (3) Remerge busybox as using USE=savedconfig.
-#
-################################################################################
-
-#SNAPSHOT=20040726
-SNAPSHOT=""
-
-DESCRIPTION="Utilities for rescue and embedded systems"
-HOMEPAGE="http://www.busybox.net/"
-if [[ -n ${SNAPSHOT} ]] ; then
-	MY_P=${PN}
-	SRC_URI="http://www.busybox.net/downloads/snapshots/${PN}-${SNAPSHOT}.tar.bz2"
-else
-	MY_P=${PN}-${PV/_/-}
-	SRC_URI="http://www.busybox.net/downloads/${MY_P}.tar.bz2"
-fi
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86"
-IUSE="debug make-symlinks pam selinux static"
-RESTRICT="test"
-
-DEPEND="selinux? ( sys-libs/libselinux )
-	pam? ( sys-libs/pam )"
-
-S=${WORKDIR}/${MY_P}
-
-busybox_config_option() {
-	case $1 in
-		y) sed -i -e "s:.*CONFIG_$2.*set:CONFIG_$2=y:g" .config;;
-		n) sed -i -e "s:CONFIG_$2=y:# CONFIG_$2 is not set:g" .config;;
-		*) use $1 \
-		       && busybox_config_option y $2 \
-		       || busybox_config_option n $2
-		   return 0
-		   ;;
-	esac
-	einfo $(grep "CONFIG_$2[= ]" .config)
-}
-
-src_unpack() {
-	unset KBUILD_OUTPUT #88088
-
-	unpack ${MY_P}.tar.bz2
-	cd "${S}"
-
-	# patches go here!
-	epatch "${FILESDIR}"/busybox-1.11.1-bb.patch
-	epatch "${FILESDIR}"/busybox-1.12.1-*.patch
-
-	# include this upstream later..
-	epatch "${FILESDIR}"/busybox-devmem.patch
-
-	epatch "${FILESDIR}"/busybox-1.12.0-mdev-exec.patch
-
-	# work around broken ass powerpc compilers
-	use ppc64 && append-flags -mminimal-toc
-	# flag cleanup
-	sed -i -r \
-		-e 's:[[:space:]]?-(Werror|Os|falign-(functions|jumps|loops|labels)=1|fomit-frame-pointer)\>::g' \
-		Makefile.flags || die
-	sed -i '/^#error Aborting compilation./d' applets/applets.c || die
-	use elibc_glibc && sed -i 's:-Wl,--gc-sections::' Makefile
-	cat <<-EOF >> Makefile.flags
-	CROSS_COMPILE := ${CHOST}-
-	HOSTCC := $(tc-getBUILD_CC)
-	SKIP_STRIP = y
-	EOF
-
-	# check for a busybox config before making one of our own.
-	# if one exist lets return and use it.
-
-	restore_config .config
-	if [ -f .config ]; then
-		yes "" | emake -j1 oldconfig > /dev/null
-		return 0
-	else
-		ewarn "Could not locate user configfile, so we will save a default one"
-	fi
-
-	# setup the config file
-	emake -j1 allyesconfig > /dev/null
-	busybox_config_option n DMALLOC
-	busybox_config_option n FEATURE_SUID_CONFIG
-	busybox_config_option n BUILD_AT_ONCE
-	busybox_config_option n BUILD_LIBBUSYBOX
-	busybox_config_option n NOMMU
-	busybox_config_option n MONOTONIC_SYSCALL
-
-	# If these are not set and we are using a uclibc/busybox setup
-	# all calls to system() will fail.
-	busybox_config_option y FEATURE_SH_IS_ASH
-	busybox_config_option n FEATURE_SH_IS_NONE
-
-	if use static && use pam ; then
-		ewarn "You cannot have USE='static pam'.  Assuming static is more important."
-	fi
-	use static \
-		&& busybox_config_option n PAM \
-		|| busybox_config_option pam PAM
-	busybox_config_option static STATIC
-	busybox_config_option debug DEBUG
-	use debug \
-		&& busybox_config_option y NO_DEBUG_LIB \
-		&& busybox_config_option n DMALLOC \
-		&& busybox_config_option n EFENCE
-
-	busybox_config_option selinux SELINUX
-
-	# default a bunch of uncommon options to off
-	for opt in LOCALE_SUPPORT TFTP FTP{GET,PUT} IPCALC TFTP HUSH \
-		LASH MSH INETD DPKG RPM2CPIO RPM FOLD LOGNAME OD CRONTAB \
-		UUDECODE UUENCODE SULOGIN DC DEBUG_YANK_SUSv2 DEBUG_INIT \
-		DEBUG_CROND_OPTION FEATURE_UDHCP_DEBUG TASKSET INOTIFYD
-	do
-		busybox_config_option n ${opt}
-	done
-
-	emake -j1 oldconfig > /dev/null
-}
-
-src_compile() {
-	unset KBUILD_OUTPUT #88088
-
-	emake busybox || die "build failed"
-	if ! use static && ! use pam ; then
-		mv busybox_unstripped{,.bak}
-		emake CONFIG_STATIC=y busybox || die "static build failed"
-		mv busybox_unstripped bb
-		mv busybox_unstripped{.bak,}
-	fi
-}
-
-src_install() {
-	unset KBUILD_OUTPUT #88088
-	save_config .config
-
-	into /
-	newbin busybox_unstripped busybox || die
-	if use static || use pam ; then
-		dosym busybox /bin/bb || die
-		dosym bb /bin/busybox.static || die
-	else
-		dobin bb || die
-	fi
-
-	insinto /$(get_libdir)/rcscripts/addons
-	doins "${FILESDIR}"/mdev-start.sh || die
-
-	# bundle up the symlink files for use later
-	emake install || die
-	rm _install/bin/busybox
-	tar cf busybox-links.tar -C _install . || : #;die
-	insinto /usr/share/${PN}
-	doins busybox-links.tar || die
-	newins .config ${PF}.config || die
-
-	dodoc AUTHORS README TODO
-
-	cd docs || die
-	docinto txt
-	dodoc *.txt
-	docinto pod
-	dodoc *.pod
-	dohtml *.html *.sgml
-
-	cd ../examples || die
-	docinto examples
-	dodoc inittab depmod.pl *.conf *.script undeb unrpm
-
-	cd bootfloppy || die
-	docinto bootfloppy
-	dodoc $(find . -type f)
-}
-
-pkg_preinst() {
-	if use make-symlinks && [[ ! ${VERY_BRAVE_OR_VERY_DUMB} == "yes" ]] && [[ ${ROOT} == "/" ]] ; then
-		ewarn "setting USE=make-symlinks and emerging to / is very dangerous."
-		ewarn "it WILL overwrite lots of system programs like: ls bash awk grep (bug 60805 for full list)."
-		ewarn "If you are creating a binary only and not merging this is probably ok."
-		ewarn "set env VERY_BRAVE_OR_VERY_DUMB=yes if this is realy what you want."
-		die "silly options will destroy your system"
-	fi
-
-	if use make-symlinks ; then
-		mv "${D}"/usr/share/${PN}/busybox-links.tar "${T}"/ || die
-	fi
-}
-
-pkg_postinst() {
-	if use make-symlinks ; then
-		cd "${T}" || die
-		mkdir _install
-		tar xf busybox-links.tar -C _install || die
-		cp -vpPR _install/* "${ROOT}"/ || die "copying links for ${x} failed"
-	fi
-
-	echo
-	einfo "This ebuild has support for user defined configs"
-	einfo "Please read this ebuild for more details and re-emerge as needed"
-	einfo "if you want to add or remove functionality for ${PN}"
-	echo
-}
diff --git a/sys-apps/busybox/busybox-1.12.2.ebuild b/sys-apps/busybox/busybox-1.12.2.ebuild
deleted file mode 100644
index 69566fd8ec81..000000000000
--- a/sys-apps/busybox/busybox-1.12.2.ebuild
+++ /dev/null
@@ -1,243 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/busybox/busybox-1.12.2.ebuild,v 1.3 2008/11/20 21:56:26 jer Exp $
-
-inherit eutils flag-o-matic savedconfig toolchain-funcs
-
-################################################################################
-# BUSYBOX ALTERNATE CONFIG MINI-HOWTO
-#
-# Busybox can be modified in many different ways. Here's a few ways to do it:
-#
-# (1) Emerge busybox with FEATURES=keepwork so the work directory won't
-#     get erased afterwards. Add a definition like ROOT=/my/root/path to the
-#     start of the line if you're installing to somewhere else than the root
-#     directory. This command will save the default configuration to
-#     ${PORTAGE_CONFIGROOT} (or ${ROOT} if ${PORTAGE_CONFIGROOT} is not
-#     defined), and it will tell you that it has done this. Note the location
-#     where the config file was saved.
-#
-#     FEATURES=keepwork USE=savedconfig emerge busybox
-#
-# (2) Go to the work directory and change the configuration of busybox using its
-#     menuconfig feature.
-#
-#     cd /var/tmp/portage/busybox*/work/busybox-*
-#     make menuconfig
-#
-# (3) Save your configuration to the default location and copy it to the
-#     one of the locations listed in /usr/portage/eclass/savedconfig.eclass
-#
-# (4) Emerge busybox with USE=savedconfig to use the configuration file you
-#     just generated.
-#
-################################################################################
-#
-# (1) Alternatively skip the above steps and simply emerge busybox without
-#     USE=savedconfig.
-#
-# (2) Edit the file it saves by hand. ${ROOT}"/etc/portage/savedconfig/${CATEGORY}/${PF}
-#
-# (3) Remerge busybox as using USE=savedconfig.
-#
-################################################################################
-
-#SNAPSHOT=20040726
-SNAPSHOT=""
-
-DESCRIPTION="Utilities for rescue and embedded systems"
-HOMEPAGE="http://www.busybox.net/"
-if [[ -n ${SNAPSHOT} ]] ; then
-	MY_P=${PN}
-	SRC_URI="http://www.busybox.net/downloads/snapshots/${PN}-${SNAPSHOT}.tar.bz2"
-else
-	MY_P=${PN}-${PV/_/-}
-	SRC_URI="http://www.busybox.net/downloads/${MY_P}.tar.bz2"
-fi
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86"
-IUSE="debug make-symlinks pam selinux static"
-RESTRICT="test"
-
-DEPEND="selinux? ( sys-libs/libselinux )
-	pam? ( sys-libs/pam )"
-
-S=${WORKDIR}/${MY_P}
-
-busybox_config_option() {
-	case $1 in
-		y) sed -i -e "s:.*CONFIG_$2.*set:CONFIG_$2=y:g" .config;;
-		n) sed -i -e "s:CONFIG_$2=y:# CONFIG_$2 is not set:g" .config;;
-		*) use $1 \
-		       && busybox_config_option y $2 \
-		       || busybox_config_option n $2
-		   return 0
-		   ;;
-	esac
-	einfo $(grep "CONFIG_$2[= ]" .config)
-}
-
-src_unpack() {
-	unset KBUILD_OUTPUT #88088
-
-	unpack ${MY_P}.tar.bz2
-	cd "${S}"
-
-	# patches go here!
-	epatch "${FILESDIR}"/busybox-1.11.1-bb.patch
-	epatch "${FILESDIR}"/busybox-${PV}-*.patch
-
-	# include this upstream later..
-	epatch "${FILESDIR}"/busybox-devmem.patch
-
-	epatch "${FILESDIR}"/busybox-1.12.0-mdev-exec.patch
-
-	# work around broken ass powerpc compilers
-	use ppc64 && append-flags -mminimal-toc
-	# flag cleanup
-	sed -i -r \
-		-e 's:[[:space:]]?-(Werror|Os|falign-(functions|jumps|loops|labels)=1|fomit-frame-pointer)\>::g' \
-		Makefile.flags || die
-	sed -i '/^#error Aborting compilation./d' applets/applets.c || die
-	use elibc_glibc && sed -i 's:-Wl,--gc-sections::' Makefile
-	cat <<-EOF >> Makefile.flags
-	CROSS_COMPILE := ${CHOST}-
-	HOSTCC := $(tc-getBUILD_CC)
-	SKIP_STRIP = y
-	EOF
-
-	# check for a busybox config before making one of our own.
-	# if one exist lets return and use it.
-
-	restore_config .config
-	if [ -f .config ]; then
-		yes "" | emake -j1 oldconfig > /dev/null
-		return 0
-	else
-		ewarn "Could not locate user configfile, so we will save a default one"
-	fi
-
-	# setup the config file
-	emake -j1 allyesconfig > /dev/null
-	busybox_config_option n DMALLOC
-	busybox_config_option n FEATURE_SUID_CONFIG
-	busybox_config_option n BUILD_AT_ONCE
-	busybox_config_option n BUILD_LIBBUSYBOX
-	busybox_config_option n NOMMU
-	busybox_config_option n MONOTONIC_SYSCALL
-
-	# If these are not set and we are using a uclibc/busybox setup
-	# all calls to system() will fail.
-	busybox_config_option y FEATURE_SH_IS_ASH
-	busybox_config_option n FEATURE_SH_IS_NONE
-
-	if use static && use pam ; then
-		ewarn "You cannot have USE='static pam'.  Assuming static is more important."
-	fi
-	use static \
-		&& busybox_config_option n PAM \
-		|| busybox_config_option pam PAM
-	busybox_config_option static STATIC
-	busybox_config_option debug DEBUG
-	use debug \
-		&& busybox_config_option y NO_DEBUG_LIB \
-		&& busybox_config_option n DMALLOC \
-		&& busybox_config_option n EFENCE
-
-	busybox_config_option selinux SELINUX
-
-	# default a bunch of uncommon options to off
-	for opt in LOCALE_SUPPORT TFTP FTP{GET,PUT} IPCALC TFTP HUSH \
-		LASH MSH INETD DPKG RPM2CPIO RPM FOLD LOGNAME OD CRONTAB \
-		UUDECODE UUENCODE SULOGIN DC DEBUG_YANK_SUSv2 DEBUG_INIT \
-		DEBUG_CROND_OPTION FEATURE_UDHCP_DEBUG TASKSET INOTIFYD
-	do
-		busybox_config_option n ${opt}
-	done
-
-	emake -j1 oldconfig > /dev/null
-}
-
-src_compile() {
-	unset KBUILD_OUTPUT #88088
-
-	emake busybox || die "build failed"
-	if ! use static && ! use pam ; then
-		mv busybox_unstripped{,.bak}
-		emake CONFIG_STATIC=y busybox || die "static build failed"
-		mv busybox_unstripped bb
-		mv busybox_unstripped{.bak,}
-	fi
-}
-
-src_install() {
-	unset KBUILD_OUTPUT #88088
-	save_config .config
-
-	into /
-	newbin busybox_unstripped busybox || die
-	if use static || use pam ; then
-		dosym busybox /bin/bb || die
-		dosym bb /bin/busybox.static || die
-	else
-		dobin bb || die
-	fi
-
-	insinto /$(get_libdir)/rcscripts/addons
-	doins "${FILESDIR}"/mdev-start.sh || die
-
-	# bundle up the symlink files for use later
-	emake install || die
-	rm _install/bin/busybox
-	tar cf busybox-links.tar -C _install . || : #;die
-	insinto /usr/share/${PN}
-	doins busybox-links.tar || die
-	newins .config ${PF}.config || die
-
-	dodoc AUTHORS README TODO
-
-	cd docs || die
-	docinto txt
-	dodoc *.txt
-	docinto pod
-	dodoc *.pod
-	dohtml *.html *.sgml
-
-	cd ../examples || die
-	docinto examples
-	dodoc inittab depmod.pl *.conf *.script undeb unrpm
-
-	cd bootfloppy || die
-	docinto bootfloppy
-	dodoc $(find . -type f)
-}
-
-pkg_preinst() {
-	if use make-symlinks && [[ ! ${VERY_BRAVE_OR_VERY_DUMB} == "yes" ]] && [[ ${ROOT} == "/" ]] ; then
-		ewarn "setting USE=make-symlinks and emerging to / is very dangerous."
-		ewarn "it WILL overwrite lots of system programs like: ls bash awk grep (bug 60805 for full list)."
-		ewarn "If you are creating a binary only and not merging this is probably ok."
-		ewarn "set env VERY_BRAVE_OR_VERY_DUMB=yes if this is realy what you want."
-		die "silly options will destroy your system"
-	fi
-
-	if use make-symlinks ; then
-		mv "${D}"/usr/share/${PN}/busybox-links.tar "${T}"/ || die
-	fi
-}
-
-pkg_postinst() {
-	if use make-symlinks ; then
-		cd "${T}" || die
-		mkdir _install
-		tar xf busybox-links.tar -C _install || die
-		cp -vpPR _install/* "${ROOT}"/ || die "copying links for ${x} failed"
-	fi
-
-	echo
-	einfo "This ebuild has support for user defined configs"
-	einfo "Please read this ebuild for more details and re-emerge as needed"
-	einfo "if you want to add or remove functionality for ${PN}"
-	echo
-}
diff --git a/sys-apps/busybox/busybox-1.13.1.ebuild b/sys-apps/busybox/busybox-1.13.1.ebuild
deleted file mode 100644
index 8b35669ac5d3..000000000000
--- a/sys-apps/busybox/busybox-1.13.1.ebuild
+++ /dev/null
@@ -1,251 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/busybox/busybox-1.13.1.ebuild,v 1.1 2008/12/27 06:16:22 vapier Exp $
-
-inherit eutils flag-o-matic savedconfig toolchain-funcs
-
-################################################################################
-# BUSYBOX ALTERNATE CONFIG MINI-HOWTO
-#
-# Busybox can be modified in many different ways. Here's a few ways to do it:
-#
-# (1) Emerge busybox with FEATURES=keepwork so the work directory won't
-#     get erased afterwards. Add a definition like ROOT=/my/root/path to the
-#     start of the line if you're installing to somewhere else than the root
-#     directory. This command will save the default configuration to
-#     ${PORTAGE_CONFIGROOT} (or ${ROOT} if ${PORTAGE_CONFIGROOT} is not
-#     defined), and it will tell you that it has done this. Note the location
-#     where the config file was saved.
-#
-#     FEATURES=keepwork USE=savedconfig emerge busybox
-#
-# (2) Go to the work directory and change the configuration of busybox using its
-#     menuconfig feature.
-#
-#     cd /var/tmp/portage/busybox*/work/busybox-*
-#     make menuconfig
-#
-# (3) Save your configuration to the default location and copy it to the
-#     one of the locations listed in /usr/portage/eclass/savedconfig.eclass
-#
-# (4) Emerge busybox with USE=savedconfig to use the configuration file you
-#     just generated.
-#
-################################################################################
-#
-# (1) Alternatively skip the above steps and simply emerge busybox without
-#     USE=savedconfig.
-#
-# (2) Edit the file it saves by hand. ${ROOT}"/etc/portage/savedconfig/${CATEGORY}/${PF}
-#
-# (3) Remerge busybox as using USE=savedconfig.
-#
-################################################################################
-
-#SNAPSHOT=20040726
-SNAPSHOT=""
-
-DESCRIPTION="Utilities for rescue and embedded systems"
-HOMEPAGE="http://www.busybox.net/"
-if [[ -n ${SNAPSHOT} ]] ; then
-	MY_P=${PN}
-	SRC_URI="http://www.busybox.net/downloads/snapshots/${PN}-${SNAPSHOT}.tar.bz2"
-else
-	MY_P=${PN}-${PV/_/-}
-	SRC_URI="http://www.busybox.net/downloads/${MY_P}.tar.bz2"
-fi
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86"
-IUSE="debug make-symlinks pam selinux static"
-RESTRICT="test"
-
-DEPEND="selinux? ( sys-libs/libselinux )
-	pam? ( sys-libs/pam )"
-
-S=${WORKDIR}/${MY_P}
-
-busybox_config_option() {
-	case $1 in
-		y) sed -i -e "s:.*CONFIG_$2.*set:CONFIG_$2=y:g" .config;;
-		n) sed -i -e "s:CONFIG_$2=y:# CONFIG_$2 is not set:g" .config;;
-		*) use $1 \
-		       && busybox_config_option y $2 \
-		       || busybox_config_option n $2
-		   return 0
-		   ;;
-	esac
-	einfo $(grep "CONFIG_$2[= ]" .config || echo Could not find CONFIG_$2 ...)
-}
-
-src_unpack() {
-	unset KBUILD_OUTPUT #88088
-
-	unpack ${MY_P}.tar.bz2
-	cd "${S}"
-
-	# patches go here!
-	epatch "${FILESDIR}"/busybox-1.11.1-bb.patch
-	epatch "${FILESDIR}"/busybox-${PV}-*.patch
-
-	epatch "${FILESDIR}"/busybox-1.12.0-mdev-exec.patch
-
-	# work around broken ass powerpc compilers
-	use ppc64 && append-flags -mminimal-toc
-	# flag cleanup
-	sed -i -r \
-		-e 's:[[:space:]]?-(Werror|Os|falign-(functions|jumps|loops|labels)=1|fomit-frame-pointer)\>::g' \
-		Makefile.flags || die
-	sed -i '/^#error Aborting compilation./d' applets/applets.c || die
-	use elibc_glibc && sed -i 's:-Wl,--gc-sections::' Makefile
-	sed -i \
-		-e "/^CROSS_COMPILE/s:=.*:= ${CHOST}-:" \
-		-e "/^HOSTCC/s:=.*:= $(tc-getBUILD_CC):" \
-		Makefile || die
-
-	# check for a busybox config before making one of our own.
-	# if one exist lets return and use it.
-
-	restore_config .config
-	if [ -f .config ]; then
-		yes "" | emake -j1 oldconfig > /dev/null
-		return 0
-	else
-		ewarn "Could not locate user configfile, so we will save a default one"
-	fi
-
-	# setup the config file
-	emake -j1 allyesconfig > /dev/null
-	busybox_config_option n DMALLOC
-	busybox_config_option n FEATURE_SUID_CONFIG
-	busybox_config_option n BUILD_AT_ONCE
-	busybox_config_option n BUILD_LIBBUSYBOX
-	busybox_config_option n NOMMU
-	busybox_config_option n MONOTONIC_SYSCALL
-
-	# If these are not set and we are using a uclibc/busybox setup
-	# all calls to system() will fail.
-	busybox_config_option y FEATURE_SH_IS_ASH
-	busybox_config_option n FEATURE_SH_IS_NONE
-
-	if use static && use pam ; then
-		ewarn "You cannot have USE='static pam'.  Assuming static is more important."
-	fi
-	use static \
-		&& busybox_config_option n PAM \
-		|| busybox_config_option pam PAM
-	busybox_config_option static STATIC
-	busybox_config_option debug DEBUG
-	use debug \
-		&& busybox_config_option y NO_DEBUG_LIB \
-		&& busybox_config_option n DMALLOC \
-		&& busybox_config_option n EFENCE
-
-	busybox_config_option selinux SELINUX
-
-	# default a bunch of uncommon options to off
-	local opt
-	for opt in \
-		APP_UDHCPD \
-		CRONTAB \
-		DC DPKG \
-		FAKEIDENTD FBSPLASH FOLD FTP{GET,PUT} \
-		HTTPD HUSH \
-		INETD INOTIFYD IPCALC \
-		LASH LOCALE_SUPPORT LOGNAME \
-		MSH \
-		OD \
-		SULOGIN \
-		TASKSET TFTP{,D} \
-		RPM RPM2CPIO \
-		UDPSVD UUDECODE UUENCODE
-	do
-		busybox_config_option n ${opt}
-	done
-
-	emake -j1 oldconfig > /dev/null
-}
-
-src_compile() {
-	unset KBUILD_OUTPUT #88088
-	export SKIP_STRIP=y
-
-	emake busybox || die "build failed"
-	if ! use static && ! use pam ; then
-		mv busybox_unstripped{,.bak}
-		emake CONFIG_STATIC=y busybox || die "static build failed"
-		mv busybox_unstripped bb
-		mv busybox_unstripped{.bak,}
-	fi
-}
-
-src_install() {
-	unset KBUILD_OUTPUT #88088
-	save_config .config
-
-	into /
-	newbin busybox_unstripped busybox || die
-	if use static || use pam ; then
-		dosym busybox /bin/bb || die
-		dosym bb /bin/busybox.static || die
-	else
-		dobin bb || die
-	fi
-
-	insinto /$(get_libdir)/rcscripts/addons
-	doins "${FILESDIR}"/mdev-start.sh || die
-
-	# bundle up the symlink files for use later
-	emake install || die
-	rm _install/bin/busybox
-	tar cf busybox-links.tar -C _install . || : #;die
-	insinto /usr/share/${PN}
-	doins busybox-links.tar || die
-	newins .config ${PF}.config || die
-
-	dodoc AUTHORS README TODO
-
-	cd docs || die
-	docinto txt
-	dodoc *.txt
-	docinto pod
-	dodoc *.pod
-	dohtml *.html *.sgml
-
-	cd ../examples || die
-	docinto examples
-	dodoc inittab depmod.pl *.conf *.script undeb unrpm
-
-	cd bootfloppy || die
-	docinto bootfloppy
-	dodoc $(find . -type f)
-}
-
-pkg_preinst() {
-	if use make-symlinks && [[ ! ${VERY_BRAVE_OR_VERY_DUMB} == "yes" ]] && [[ ${ROOT} == "/" ]] ; then
-		ewarn "setting USE=make-symlinks and emerging to / is very dangerous."
-		ewarn "it WILL overwrite lots of system programs like: ls bash awk grep (bug 60805 for full list)."
-		ewarn "If you are creating a binary only and not merging this is probably ok."
-		ewarn "set env VERY_BRAVE_OR_VERY_DUMB=yes if this is realy what you want."
-		die "silly options will destroy your system"
-	fi
-
-	if use make-symlinks ; then
-		mv "${D}"/usr/share/${PN}/busybox-links.tar "${T}"/ || die
-	fi
-}
-
-pkg_postinst() {
-	if use make-symlinks ; then
-		cd "${T}" || die
-		mkdir _install
-		tar xf busybox-links.tar -C _install || die
-		cp -vpPR _install/* "${ROOT}"/ || die "copying links for ${x} failed"
-	fi
-
-	echo
-	einfo "This ebuild has support for user defined configs"
-	einfo "Please read this ebuild for more details and re-emerge as needed"
-	einfo "if you want to add or remove functionality for ${PN}"
-	echo
-}