proj/gentoo: Initial commit

This commit represents a new era for Gentoo:
Storing the gentoo-x86 tree in Git, as converted from CVS.

This commit is the start of the NEW history.
Any historical data is intended to be grafted onto this point.

Creation process:
1. Take final CVS checkout snapshot
2. Remove ALL ChangeLog* files
3. Transform all Manifests to thin
4. Remove empty Manifests
5. Convert all stale $Header$/$Id$ CVS keywords to non-expanded Git $Id$
5.1. Do not touch files with -kb/-ko keyword flags.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
X-Thanks: Alec Warner <antarus@gentoo.org> - did the GSoC 2006 migration tests
X-Thanks: Robin H. Johnson <robbat2@gentoo.org> - infra guy, herding this project
X-Thanks: Nguyen Thai Ngoc Duy <pclouds@gentoo.org> - Former Gentoo developer, wrote Git features for the migration
X-Thanks: Brian Harring <ferringb@gentoo.org> - wrote much python to improve cvs2svn
X-Thanks: Rich Freeman <rich0@gentoo.org> - validation scripts
X-Thanks: Patrick Lauer <patrick@gentoo.org> - Gentoo dev, running new 2014 work in migration
X-Thanks: Michał Górny <mgorny@gentoo.org> - scripts, QA, nagging
X-Thanks: All of other Gentoo developers - many ideas and lots of paint on the bikeshed

1 files changed, 475 insertions, 0 deletions

diff --git a/app-backup/amanda/amanda-3.3.5.ebuild b/app-backup/amanda/amanda-3.3.5.ebuild
new file mode 100644
index 000000000000..de12f3fb788d
--- /dev/null
+++ b/app-backup/amanda/amanda-3.3.5.ebuild
@@ -0,0 +1,475 @@
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+inherit autotools eutils perl-module user systemd
+
+DESCRIPTION="The Advanced Maryland Automatic Network Disk Archiver"
+HOMEPAGE="http://www.amanda.org/"
+SRC_URI="mirror://sourceforge/amanda/${P}.tar.gz"
+
+LICENSE="HPND BSD BSD-2 GPL-2+ GPL-3+"
+SLOT="0"
+IUSE="curl gnuplot ipv6 kerberos minimal nls readline s3 samba systemd xfs"
+
+KEYWORDS="~amd64 ~ppc ~ppc64 ~sparc ~x86"
+RDEPEND="sys-libs/readline
+	virtual/awk
+	app-arch/tar
+	dev-lang/perl:=
+	app-arch/dump
+	net-misc/openssh
+	>=dev-libs/glib-2.26.0
+	nls? ( virtual/libintl )
+	s3? ( >=net-misc/curl-7.10.0 )
+	!s3? ( curl? ( >=net-misc/curl-7.10.0 ) )
+	samba? ( net-fs/samba )
+	kerberos? ( app-crypt/mit-krb5 )
+	xfs? ( sys-fs/xfsdump )
+	readline? ( sys-libs/readline )
+	!minimal? (
+		dev-perl/XML-Simple
+		virtual/mailx
+		app-arch/mt-st
+		sys-block/mtx
+		gnuplot? ( sci-visualization/gnuplot )
+		app-crypt/aespipe
+		app-crypt/gnupg
+	)"
+
+DEPEND="${RDEPEND}
+	virtual/pkgconfig
+	nls? ( sys-devel/gettext )
+	>=app-text/docbook-xsl-stylesheets-1.72.0
+	app-text/docbook-xml-dtd
+	dev-libs/libxslt
+	"
+
+MYFILESDIR="${T}/files"
+ENVDIR="/etc/env.d"
+ENVDFILE="97amanda"
+TMPENVFILE="${T}/${ENVDFILE}"
+
+# This is a complete list of Amanda settings that the ebuild takes from the
+# build environment. This allows users to alter the behavior of the package as
+# upstream intended, but keeping with Gentoo style. We store a copy of them in
+# /etc/env.d/97amanda during the install, so that they are preserved for future
+# installed. This variable name must not start with AMANDA_, as we do not want
+# it captured into the env file.
+ENV_SETTINGS_AMANDA="
+AMANDA_GROUP_GID AMANDA_GROUP_NAME
+AMANDA_USER_NAME AMANDA_USER_UID AMANDA_USER_SH AMANDA_USER_HOMEDIR AMANDA_USER_GROUPS
+AMANDA_SERVER AMANDA_SERVER_TAPE AMANDA_SERVER_INDEX
+AMANDA_TAR_LISTDIR AMANDA_TAR
+AMANDA_PORTS_UDP AMANDA_PORTS_TCP AMANDA_PORTS_BOTH AMANDA_PORTS
+AMANDA_CONFIG_NAME AMANDA_TMPDIR"
+
+amanda_variable_setup() {
+
+	# Setting vars
+	local currentamanda
+
+	# Grab the current settings
+	currentamanda="$(set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' | xargs)"
+
+	# First we set the defaults
+	[ -z "${AMANDA_GROUP_GID}" ] && AMANDA_GROUP_GID=87
+	[ -z "${AMANDA_GROUP_NAME}" ] && AMANDA_GROUP_NAME=amanda
+	[ -z "${AMANDA_USER_NAME}" ] && AMANDA_USER_NAME=amanda
+	[ -z "${AMANDA_USER_UID}" ] && AMANDA_USER_UID=87
+	[ -z "${AMANDA_USER_SH}" ] && AMANDA_USER_SH=/bin/bash
+	[ -z "${AMANDA_USER_HOMEDIR}" ] && AMANDA_USER_HOMEDIR=/var/spool/amanda
+	[ -z "${AMANDA_USER_GROUPS}" ] && AMANDA_USER_GROUPS="${AMANDA_GROUP_NAME}"
+
+	# This installs Amanda, with the server. However, it could be a client,
+	# just specify an alternate server name in AMANDA_SERVER.
+	[ -z "${AMANDA_SERVER}" ] && AMANDA_SERVER="${HOSTNAME}"
+	[ -z "${AMANDA_SERVER_TAPE}" ] && AMANDA_SERVER_TAPE="${AMANDA_SERVER}"
+	[ -z "${AMANDA_SERVER_INDEX}" ] && AMANDA_SERVER_INDEX="${AMANDA_SERVER}"
+	[ -z "${AMANDA_TAR_LISTDIR}" ] && AMANDA_TAR_LISTDIR=${AMANDA_USER_HOMEDIR}/tar-lists
+	[ -z "${AMANDA_CONFIG_NAME}" ] && AMANDA_CONFIG_NAME=DailySet1
+	[ -z "${AMANDA_TMPDIR}" ] && AMANDA_TMPDIR=/var/tmp/amanda
+	[ -z "${AMANDA_DBGDIR}" ] && AMANDA_DBGDIR="$AMANDA_TMPDIR"
+	# These are left empty by default
+	[ -z "${AMANDA_PORTS_UDP}" ] && AMANDA_PORTS_UDP=
+	[ -z "${AMANDA_PORTS_TCP}" ] && AMANDA_PORTS_TCP=
+	[ -z "${AMANDA_PORTS_BOTH}" ] && AMANDA_PORTS_BOTH=
+	[ -z "${AMANDA_PORTS}" ] && AMANDA_PORTS=
+
+	# What tar to use
+	[ -z "${AMANDA_TAR}" ] && AMANDA_TAR=/bin/tar
+
+	# Now pull in the old stuff
+	if [ -f "${ROOT}${ENVDIR}/${ENVDFILE}" ]; then
+		# We don't just source it as we don't want everything in there.
+		eval $(egrep "^AMANDA_" "${ROOT}${ENVDIR}/${ENVDFILE}" | grep -v '^AMANDA_ENV_SETTINGS')
+	fi
+
+	# Re-apply the new settings if any
+	[ -n "${currentamanda}" ] && eval `echo "${currentamanda}"`
+
+}
+
+pkg_setup() {
+	amanda_variable_setup
+
+	# If USE=minimal, give out a warning, if AMANDA_SERVER is not set to
+	# another host than HOSTNAME.
+	if use minimal && [ "${AMANDA_SERVER}" = "${HOSTNAME}" ] ; then
+		elog "You are installing a client-only version of Amanda."
+		elog "You should set the variable \$AMANDA_SERVER to point at your"
+		elog "Amanda-tape-server, otherwise you will have to specify its name"
+		elog "when using amrecover on the client."
+		elog "For example: Use something like"
+		elog "AMANDA_SERVER=\"myserver\" emerge amanda"
+		elog
+	fi
+
+	enewgroup "${AMANDA_GROUP_NAME}" "${AMANDA_GROUP_GID}"
+	enewuser "${AMANDA_USER_NAME}" "${AMANDA_USER_UID}" "${AMANDA_USER_SH}" "${AMANDA_USER_HOMEDIR}" "${AMANDA_USER_GROUPS}"
+}
+
+src_unpack() {
+	# we do not want the perl src_unpack
+	default_src_unpack
+}
+
+src_prepare() {
+	# gentoo bug #537248
+	epatch "${FILESDIR}/local-amanda-perl5.20.patch"
+
+	# gentoo bug #331111
+	sed -i '/^check-local: check-perl$/d' "${S}"/config/automake/scripts.am
+	sed -i '/^check-local:/s,syntax-check,,g' "${S}"/perl/Makefile.am
+
+	# bug with glibc-2.16.0
+	sed -i -e '/gets is a security/d' "${S}"/gnulib/stdio.in.h
+
+	eautoreconf
+
+	# places for us to work in
+	mkdir -p "${MYFILESDIR}"
+	# Now we store the settings we just created
+	set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' > "${TMPENVFILE}"
+
+	# Prepare our custom files
+	einfo "Building custom configuration files"
+	local i # our iterator
+	local sedexpr # var for sed expr
+	sedexpr=''
+	for i in ${ENV_SETTINGS_AMANDA} ; do
+		local val
+		eval "val=\"\${${i}}\""
+		sedexpr="${sedexpr}s|__${i}__|${val}|g;"
+	done
+
+	# now apply the sed expr
+	for i in "${FILESDIR}"/amanda-* ; do
+		sed -re "${sedexpr}" <"${i}" >"${MYFILESDIR}/`basename ${i}`"
+	done
+
+	(
+		cat "${MYFILESDIR}"/amanda-amandahosts-client-2.5.1_p3-r1
+		use minimal || cat "${MYFILESDIR}"/amanda-amandahosts-server-2.5.1_p3-r1
+	) > "${T}"/amandahosts
+
+	if ! use minimal; then
+		sed -i -e 's:^\(my $amandahomedir\)=.*:\1 = $localstatedir;:' \
+			server-src/am{addclient,serverconfig}.pl || die
+	fi
+}
+
+src_configure() {
+	# fix bug #36316
+	addpredict /var/cache/samba/gencache.tdb
+	# fix bug #376169
+	addpredict /run/blkid
+	addpredict /etc/blkid.tab
+
+	[ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
+	source "${TMPENVFILE}"
+	local myconf
+
+	einfo "Using ${AMANDA_SERVER_TAPE} for tape server."
+	myconf="${myconf} --with-tape-server=${AMANDA_SERVER_TAPE}"
+	einfo "Using ${AMANDA_SERVER_INDEX} for index server."
+	myconf="${myconf} --with-index-server=${AMANDA_SERVER_INDEX}"
+	einfo "Using ${AMANDA_USER_NAME} for amanda user."
+	myconf="${myconf} --with-user=${AMANDA_USER_NAME}"
+	einfo "Using ${AMANDA_GROUP_NAME} for amanda group."
+	myconf="${myconf} --with-group=${AMANDA_GROUP_NAME}"
+	einfo "Using ${AMANDA_TAR} as Tar implementation."
+	myconf="${myconf} --with-gnutar=${AMANDA_TAR}"
+	einfo "Using ${AMANDA_TAR_LISTDIR} as tar listdir."
+	myconf="${myconf} --with-gnutar-listdir=${AMANDA_TAR_LISTDIR}"
+	einfo "Using ${AMANDA_CONFIG_NAME} as default config name."
+	myconf="${myconf} --with-config=${AMANDA_CONFIG_NAME}"
+	einfo "Using ${AMANDA_TMPDIR} as Amanda temporary directory."
+	myconf="${myconf} --with-tmpdir=${AMANDA_TMPDIR}"
+
+	if [ -n "${AMANDA_PORTS_UDP}" ] && [ -n "${AMANDA_PORTS_TCP}" ] && [ -z "${AMANDA_PORTS_BOTH}" ] ; then
+		eerror "If you want _both_ UDP and TCP ports, please use only the"
+		eerror "AMANDA_PORTS environment variable for identical ports, or set"
+		eerror "AMANDA_PORTS_BOTH."
+		die "Bad port setup!"
+	fi
+	if [ -n "${AMANDA_PORTS_UDP}" ]; then
+		einfo "Using UDP ports ${AMANDA_PORTS_UDP/,/-}"
+		myconf="${myconf} --with-udpportrange=${AMANDA_PORTS_UDP}"
+	fi
+	if [ -n "${AMANDA_PORTS_TCP}" ]; then
+		einfo "Using TCP ports ${AMANDA_PORTS_TCP/,/-}"
+		myconf="${myconf} --with-tcpportrange=${AMANDA_PORTS_TCP}"
+	fi
+	if [ -n "${AMANDA_PORTS}" ]; then
+		einfo "Using ports ${AMANDA_PORTS/,/-}"
+		myconf="${myconf} --with-portrange=${AMANDA_PORTS}"
+	fi
+
+	# Extras
+	# Speed option
+	myconf="${myconf} --with-buffered-dump"
+	# "debugging" in the configuration is NOT debug in the conventional sense.
+	# It is actually just useful output in the application, and should remain
+	# enabled. There are some cases of breakage with MTX tape changers as of
+	# 2.5.1p2 that it exposes when turned off as well.
+	myconf="${myconf} --with-debugging"
+	# Where to put our files
+	myconf="${myconf} --localstatedir=${AMANDA_USER_HOMEDIR}"
+
+	# Samba support
+	myconf="${myconf} `use_with samba smbclient /usr/bin/smbclient`"
+
+	# Support for BSD, SSH, BSDUDP, BSDTCP security methods all compiled in by
+	# default
+	myconf="${myconf} --with-bsd-security"
+	myconf="${myconf} --with-ssh-security"
+	myconf="${myconf} --with-bsdudp-security"
+	myconf="${myconf} --with-bsdtcp-security"
+
+	# kerberos-security mechanism version 5
+	myconf="${myconf} `use_with kerberos krb5-security`"
+
+	# Amazon S3 support
+	myconf="${myconf} `use_enable s3 s3-device`"
+
+	# libcurl is required for S3 but otherwise optional
+	if ! use s3; then
+		myconf="${myconf} $(use_with curl libcurl)"
+	fi
+
+	# Client only, as requested in bug #127725
+	if use minimal ; then
+		myconf="${myconf} --without-server"
+	else
+		# amplot
+		myconf="${myconf} $(use_with gnuplot)"
+	fi
+
+	# IPv6 fun.
+	myconf="${myconf} `use_with ipv6`"
+	# This is to prevent the IPv6-is-working test
+	# As the test fails on binpkg build hosts with no IPv6.
+	use ipv6 && export amanda_cv_working_ipv6=yes
+
+	# I18N
+	myconf="${myconf} `use_enable nls`"
+
+	# Bug #296634: Perl location
+	perl_set_version
+	myconf="${myconf} --with-amperldir=${VENDOR_LIB}"
+
+	# Bug 296633: --disable-syntax-checks
+	# Some tests are not safe for production systems
+	myconf="${myconf} --disable-syntax-checks"
+
+	# build manpages
+	myconf="${myconf} --enable-manpage-build"
+
+	# bug #483120
+	tc-export AR
+
+	econf \
+		$(use_with readline) \
+		${myconf}
+}
+
+src_compile() {
+	# Again, do not want the perl-module src_compile
+	default_src_compile
+}
+
+src_install() {
+	[ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
+	source ${TMPENVFILE}
+
+	einfo "Doing stock install"
+	emake DESTDIR="${D}" install || die
+
+	# Build the envdir file
+	# Don't forget this..
+	einfo "Building environment file"
+	(
+		echo "# These settings are what was present in the environment when this"
+		echo "# Amanda was compiled.  Changing anything below this comment will"
+		echo "# have no effect on your application, but it merely exists to"
+		echo "# preserve them for your next emerge of Amanda"
+		cat "${TMPENVFILE}" | sed "s,=\$,='',g"
+	) >> "${MYFILESDIR}/${ENVDFILE}"
+
+	# Env.d
+	einfo "Installing environment config file"
+	doenvd "${MYFILESDIR}/${ENVDFILE}"
+
+	# Lock down next section (up until docs).
+	insopts -m0640
+	# Installing Amanda Xinetd Services Definition
+	einfo "Installing xinetd service file"
+	insinto /etc/xinetd.d
+	if use minimal ; then
+		newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-client amanda
+	else
+		newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-server amanda
+	fi
+
+	if ! use minimal; then
+		einfo "Installing Sample Daily Cron Job for Amanda"
+		insinto /etc/cron.daily
+		newins "${MYFILESDIR}/amanda-cron" amanda
+	fi
+
+	einfo "Installing systemd service and socket files for Amanda"
+	systemd_dounit "${FILESDIR}"/amanda.socket || die
+	systemd_newunit "${FILESDIR}"/amanda.service-r1 'amanda@.service' || die
+
+	insinto /etc/amanda
+	einfo "Installing .amandahosts File for ${AMANDA_USER_NAME} user"
+	doins "${T}/amandahosts"
+	fperms 600 /etc/amanda/amandahosts
+
+	dosym /etc/amanda/amandahosts "${AMANDA_USER_HOMEDIR}/.amandahosts"
+	insinto "${AMANDA_USER_HOMEDIR}"
+	einfo "Installing .profile for ${AMANDA_USER_NAME} user"
+	newins "${MYFILESDIR}/amanda-profile" .profile
+
+	insinto /etc/amanda
+	doins "${S}/example/amanda-client.conf"
+	if ! use minimal ; then
+		insinto "/etc/amanda/${AMANDA_CONFIG_NAME}"
+		doins "${S}/example/amanda.conf"
+		doins "${S}/example/disklist"
+		keepdir "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}/index"
+	fi
+
+	keepdir "${AMANDA_TAR_LISTDIR}"
+	keepdir "${AMANDA_USER_HOMEDIR}/amanda"
+	keepdir "${AMANDA_TMPDIR}/dumps"
+	# Just make sure it exists for XFS to work...
+	use xfs && keepdir /var/xfsdump/inventory
+
+	local i
+	for i in "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \
+		"${AMANDA_TMPDIR}" /etc/amanda; do
+		einfo "Securing directory (${i})"
+		fowners -R ${AMANDA_USER_NAME}:${AMANDA_GROUP_NAME} ${i}
+	done
+	# Do NOT use -R
+	fperms 0700 \
+		"${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \
+		"${AMANDA_TMPDIR}" "${AMANDA_TMPDIR}/dumps" \
+		 "${AMANDA_USER_HOMEDIR}/amanda" \
+		 /etc/amanda
+
+	if ! use minimal ; then
+		fperms 0700 \
+			 "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}" \
+	         /etc/amanda/${AMANDA_CONFIG_NAME}
+	fi
+
+	einfo "Setting setuid permissions"
+	amanda_permissions_fix "${D}"
+
+	# Relax permissions again
+	insopts -m0644
+
+	# docs
+	einfo "Installing documentation"
+	dodoc AUTHORS ChangeLog DEVELOPING NEWS README ReleaseNotes UPGRADING
+	# our inetd sample
+	einfo "Installing standard inetd sample"
+	newdoc "${MYFILESDIR}/amanda-inetd.amanda.sample-2.6.0_p2-r2" amanda-inetd.amanda.sample
+	# Amanda example configs
+	einfo "Installing example configurations"
+	rm "${D}"/usr/share/amanda/{COPYRIGHT,ChangeLog,NEWS,ReleaseNotes}
+	mv "${D}/usr/share/amanda/example" "${D}/usr/share/doc/${PF}/"
+	docinto example1
+	newdoc "${FILESDIR}/example_amanda.conf" amanda.conf
+	newdoc "${FILESDIR}/example_disklist-2.5.1_p3-r1" disklist
+	newdoc "${FILESDIR}/example_global.conf" global.conf
+
+	einfo "Cleaning up dud .la files"
+	perl_set_version
+	find "${D}"/"${VENDOR_LIB}" -name '*.la' -print0 |xargs -0 rm -f
+}
+
+pkg_postinst() {
+	[ ! -f "${TMPENVFILE}" -a "$MERGE_TYPE" == "binary" ] && \
+		TMPENVFILE="${ROOT}${ENVDIR}/${ENVDFILE}"
+	[ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
+	source "${TMPENVFILE}"
+
+	# Migration of amandates from /etc to $localstatedir/amanda
+	if [ -f "${ROOT}/etc/amandates" -a \
+		! -f "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" ]; then
+		einfo "Migrating amandates from /etc/ to ${AMANDA_USER_HOMEDIR}/amanda"
+		einfo "A backup is also placed at /etc/amandates.orig"
+		cp -dp "${ROOT}/etc/amandates" "${ROOT}/etc/amandates.orig"
+		mkdir -p "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/"
+		cp -dp "${ROOT}/etc/amandates" "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates"
+	fi
+	if [ -f "${ROOT}/etc/amandates" ]; then
+		einfo "If you have migrated safely, please delete /etc/amandates"
+	fi
+
+	einfo "Checking setuid permissions"
+	amanda_permissions_fix "${ROOT}"
+
+	elog "You should configure Amanda in /etc/amanda now."
+	elog
+	elog "If you use xinetd, Don't forget to check /etc/xinetd.d/amanda"
+	elog "and restart xinetd afterwards!"
+	elog
+	elog "Otherwise, please look at /usr/share/doc/${PF}/inetd.amanda.sample"
+	elog "as an example of how to configure your inetd."
+	elog
+	elog "NOTICE: If you need raw access to partitions you need to add the"
+	elog "amanda user to the 'disk' group."
+	elog
+	elog "NOTICE: If you have a tape changer, you need to add the amanda user"
+	elog "to the 'tape' group."
+	elog
+	elog "If you use localhost in your disklist your restores may break."
+	elog "You should replace it with the actual hostname!"
+	elog "Please also see the syntax changes to amandahosts."
+	elog
+	elog "Please note that this package no longer explicitly depends on"
+	elog "virtual/inetd, as it supports modes where an inetd is not needed"
+	elog "(see bug #506028 for details)."
+
+}
+
+# We have had reports of amanda file permissions getting screwed up.
+# Losing setuid, becoming too lax etc.
+# ONLY root and users in the amanda group should be able to run these binaries!
+amanda_permissions_fix() {
+	local root="$1"
+	[ -z "${root}" ] && die "Failed to pass root argument to amanda_permissions_fix!"
+	local le="/usr/libexec/amanda"
+	for i in /usr/sbin/amcheck "${le}"/calcsize "${le}"/killpgrp \
+		"${le}"/rundump "${le}"/runtar "${le}"/dumper \
+		"${le}"/planner ; do
+		chown root:${AMANDA_GROUP_NAME} "${root}"/${i}
+		chmod u=srwx,g=rx,o= "${root}"/${i}
+	done
+}