app-shells/bash: Removed old.

Package-Manager: Portage-2.3.62, Repoman-2.3.12
Signed-off-by: Lars Wendler <polynomial-c@gentoo.org>

3 files changed, 0 insertions, 645 deletions

diff --git a/app-shells/bash/bash-4.4_p12.ebuild b/app-shells/bash/bash-4.4_p12.ebuild
deleted file mode 100644
index 2ebe6c54d4b3..000000000000
--- a/app-shells/bash/bash-4.4_p12.ebuild
+++ /dev/null
@@ -1,253 +0,0 @@
-# Copyright 1999-2018 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="5"
-
-inherit eutils flag-o-matic toolchain-funcs multilib prefix
-
-# Official patchlevel
-# See ftp://ftp.cwru.edu/pub/bash/bash-4.4-patches/
-PLEVEL=${PV##*_p}
-MY_PV=${PV/_p*}
-MY_PV=${MY_PV/_/-}
-MY_P=${PN}-${MY_PV}
-is_release() {
-	case ${PV} in
-	*_alpha*|*_beta*|*_rc*) return 1 ;;
-	*) return 0 ;;
-	esac
-}
-[[ ${PV} != *_p* ]] && PLEVEL=0
-patches() {
-	local opt=$1 plevel=${2:-${PLEVEL}} pn=${3:-${PN}} pv=${4:-${MY_PV}}
-	[[ ${plevel} -eq 0 ]] && return 1
-	eval set -- {1..${plevel}}
-	set -- $(printf "${pn}${pv/\.}-%03d " "$@")
-	if [[ ${opt} == -s ]] ; then
-		echo "${@/#/${DISTDIR}/}"
-	else
-		local u
-		for u in ftp://ftp.cwru.edu/pub/bash mirror://gnu/${pn} ; do
-			printf "${u}/${pn}-${pv}-patches/%s " "$@"
-		done
-	fi
-}
-
-# The version of readline this bash normally ships with.
-READLINE_VER="7.0"
-
-DESCRIPTION="The standard GNU Bourne again shell"
-HOMEPAGE="http://tiswww.case.edu/php/chet/bash/bashtop.html"
-if is_release ; then
-	SRC_URI="mirror://gnu/bash/${MY_P}.tar.gz $(patches)"
-else
-	SRC_URI="ftp://ftp.cwru.edu/pub/bash/${MY_P}.tar.gz"
-fi
-
-LICENSE="GPL-3"
-SLOT="0"
-KEYWORDS="alpha amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc x86 ~amd64-fbsd ~x86-fbsd"
-IUSE="afs bashlogger examples mem-scramble +net nls plugins +readline"
-
-DEPEND=">=sys-libs/ncurses-5.2-r2:0=
-	readline? ( >=sys-libs/readline-${READLINE_VER}:0= )
-	nls? ( virtual/libintl )"
-RDEPEND="${DEPEND}
-	!<sys-apps/portage-2.1.6.7_p1"
-# we only need yacc when the .y files get patched (bash42-005)
-#DEPEND+=" virtual/yacc"
-
-S=${WORKDIR}/${MY_P}
-
-pkg_setup() {
-	if is-flag -malign-double ; then #7332
-		eerror "Detected bad CFLAGS '-malign-double'.  Do not use this"
-		eerror "as it breaks LFS (struct stat64) on x86."
-		die "remove -malign-double from your CFLAGS mr ricer"
-	fi
-	if use bashlogger ; then
-		ewarn "The logging patch should ONLY be used in restricted (i.e. honeypot) envs."
-		ewarn "This will log ALL output you enter into the shell, you have been warned."
-	fi
-}
-
-src_unpack() {
-	unpack ${MY_P}.tar.gz
-}
-
-src_prepare() {
-	# Include official patches
-	[[ ${PLEVEL} -gt 0 ]] && epatch $(patches -s)
-
-	# Clean out local libs so we know we use system ones w/releases.
-	if is_release ; then
-		rm -rf lib/{readline,termcap}/*
-		touch lib/{readline,termcap}/Makefile.in # for config.status
-		sed -ri -e 's:\$[(](RL|HIST)_LIBSRC[)]/[[:alpha:]]*.h::g' Makefile.in || die
-	fi
-
-	# Prefixify hardcoded path names. No-op for non-prefix.
-	hprefixify pathnames.h.in
-
-	# Avoid regenerating docs after patches #407985
-	sed -i -r '/^(HS|RL)USER/s:=.*:=:' doc/Makefile.in || die
-	touch -r . doc/*
-
-	epatch_user
-}
-
-src_configure() {
-	local myconf=()
-
-	# For descriptions of these, see config-top.h
-	# bashrc/#26952 bash_logout/#90488 ssh/#24762 mktemp/#574426
-	append-cppflags \
-		-DDEFAULT_PATH_VALUE=\'\"${EPREFIX}/usr/local/sbin:${EPREFIX}/usr/local/bin:${EPREFIX}/usr/sbin:${EPREFIX}/usr/bin:${EPREFIX}/sbin:${EPREFIX}/bin\"\' \
-		-DSTANDARD_UTILS_PATH=\'\"${EPREFIX}/bin:${EPREFIX}/usr/bin:${EPREFIX}/sbin:${EPREFIX}/usr/sbin\"\' \
-		-DSYS_BASHRC=\'\"${EPREFIX}/etc/bash/bashrc\"\' \
-		-DSYS_BASH_LOGOUT=\'\"${EPREFIX}/etc/bash/bash_logout\"\' \
-		-DNON_INTERACTIVE_LOGIN_SHELLS \
-		-DSSH_SOURCE_BASHRC \
-		$(use bashlogger && echo -DSYSLOG_HISTORY)
-
-	# Don't even think about building this statically without
-	# reading Bug 7714 first.  If you still build it statically,
-	# don't come crying to us with bugs ;).
-	#use static && export LDFLAGS="${LDFLAGS} -static"
-	use nls || myconf+=( --disable-nls )
-
-	# Historically, we always used the builtin readline, but since
-	# our handling of SONAME upgrades has gotten much more stable
-	# in the PM (and the readline ebuild itself preserves the old
-	# libs during upgrades), linking against the system copy should
-	# be safe.
-	# Exact cached version here doesn't really matter as long as it
-	# is at least what's in the DEPEND up above.
-	export ac_cv_rl_version=${READLINE_VER%%_*}
-
-	# Force linking with system curses ... the bundled termcap lib
-	# sucks bad compared to ncurses.  For the most part, ncurses
-	# is here because readline needs it.  But bash itself calls
-	# ncurses in one or two small places :(.
-
-	if is_release ; then
-		# Use system readline only with released versions.
-		myconf+=( --with-installed-readline=. )
-	fi
-
-	if use plugins; then
-		append-ldflags -Wl,-rpath,/usr/$(get_libdir)/bash
-	else
-		# Disable the plugins logic by hand since bash doesn't
-		# provide a way of doing it.
-		export ac_cv_func_dl{close,open,sym}=no \
-			ac_cv_lib_dl_dlopen=no ac_cv_header_dlfcn_h=no
-		sed -i \
-			-e '/LOCAL_LDFLAGS=/s:-rdynamic::' \
-			configure || die
-	fi
-	tc-export AR #444070
-	econf \
-		--docdir='$(datarootdir)'/doc/${PF} \
-		--htmldir='$(docdir)/html' \
-		--with-curses \
-		$(use_with afs) \
-		$(use_enable net net-redirections) \
-		--disable-profiling \
-		$(use_enable mem-scramble) \
-		$(use_with mem-scramble bash-malloc) \
-		$(use_enable readline) \
-		$(use_enable readline history) \
-		$(use_enable readline bang-history) \
-		"${myconf[@]}"
-}
-
-src_compile() {
-	emake
-
-	if use plugins ; then
-		emake -C examples/loadables all others
-	fi
-}
-
-src_install() {
-	local d f
-
-	default
-
-	dodir /bin
-	mv "${ED}"/usr/bin/bash "${ED}"/bin/ || die
-	dosym bash /bin/rbash
-
-	insinto /etc/bash
-	doins "${FILESDIR}"/bash_logout
-	doins "$(prefixify_ro "${FILESDIR}"/bashrc)"
-	keepdir /etc/bash/bashrc.d
-	insinto /etc/skel
-	for f in bash{_logout,_profile,rc} ; do
-		newins "${FILESDIR}"/dot-${f} .${f}
-	done
-
-	local sed_args=(
-		-e "s:#${USERLAND}#@::"
-		-e '/#@/d'
-	)
-	if ! use readline ; then
-		sed_args+=( #432338
-			-e '/^shopt -s histappend/s:^:#:'
-			-e 's:use_color=true:use_color=false:'
-		)
-	fi
-	sed -i \
-		"${sed_args[@]}" \
-		"${ED}"/etc/skel/.bashrc \
-		"${ED}"/etc/bash/bashrc || die
-
-	if use plugins ; then
-		exeinto /usr/$(get_libdir)/bash
-		doexe $(echo examples/loadables/*.o | sed 's:\.o::g')
-		insinto /usr/include/bash-plugins
-		doins *.h builtins/*.h include/*.h lib/{glob/glob.h,tilde/tilde.h}
-	fi
-
-	if use examples ; then
-		for d in examples/{functions,misc,scripts,startup-files} ; do
-			exeinto /usr/share/doc/${PF}/${d}
-			insinto /usr/share/doc/${PF}/${d}
-			for f in ${d}/* ; do
-				if [[ ${f##*/} != PERMISSION ]] && [[ ${f##*/} != *README ]] ; then
-					doexe ${f}
-				else
-					doins ${f}
-				fi
-			done
-		done
-	fi
-
-	doman doc/*.1
-	newdoc CWRU/changelog ChangeLog
-	dosym bash.info /usr/share/info/bashref.info
-}
-
-pkg_preinst() {
-	if [[ -e ${EROOT}/etc/bashrc ]] && [[ ! -d ${EROOT}/etc/bash ]] ; then
-		mkdir -p "${EROOT}"/etc/bash
-		mv -f "${EROOT}"/etc/bashrc "${EROOT}"/etc/bash/
-	fi
-
-	if [[ -L ${EROOT}/bin/sh ]] ; then
-		# rewrite the symlink to ensure that its mtime changes. having /bin/sh
-		# missing even temporarily causes a fatal error with paludis.
-		local target=$(readlink "${EROOT}"/bin/sh)
-		local tmp=$(emktemp "${EROOT}"/bin)
-		ln -sf "${target}" "${tmp}"
-		mv -f "${tmp}" "${EROOT}"/bin/sh
-	fi
-}
-
-pkg_postinst() {
-	# If /bin/sh does not exist, provide it
-	if [[ ! -e ${EROOT}/bin/sh ]] ; then
-		ln -sf bash "${EROOT}"/bin/sh
-	fi
-}
diff --git a/app-shells/bash/bash-5.0.ebuild b/app-shells/bash/bash-5.0.ebuild
deleted file mode 100644
index cace89b9690c..000000000000
--- a/app-shells/bash/bash-5.0.ebuild
+++ /dev/null
@@ -1,259 +0,0 @@
-# Copyright 1999-2019 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-inherit flag-o-matic toolchain-funcs multilib prefix
-
-# Official patchlevel
-# See ftp://ftp.cwru.edu/pub/bash/bash-4.4-patches/
-PLEVEL=${PV##*_p}
-MY_PV=${PV/_p*}
-MY_PV=${MY_PV/_/-}
-MY_P=${PN}-${MY_PV}
-is_release() {
-	case ${PV} in
-	*_alpha*|*_beta*|*_rc*) return 1 ;;
-	*) return 0 ;;
-	esac
-}
-[[ ${PV} != *_p* ]] && PLEVEL=0
-patches() {
-	local opt=$1 plevel=${2:-${PLEVEL}} pn=${3:-${PN}} pv=${4:-${MY_PV}}
-	[[ ${plevel} -eq 0 ]] && return 1
-	eval set -- {1..${plevel}}
-	set -- $(printf "${pn}${pv/\.}-%03d " "$@")
-	if [[ ${opt} == -s ]] ; then
-		echo "${@/#/${DISTDIR}/}"
-	else
-		local u
-		for u in ftp://ftp.cwru.edu/pub/bash mirror://gnu/${pn} ; do
-			printf "${u}/${pn}-${pv}-patches/%s " "$@"
-		done
-	fi
-}
-
-# The version of readline this bash normally ships with.
-READLINE_VER="8.0"
-
-DESCRIPTION="The standard GNU Bourne again shell"
-HOMEPAGE="http://tiswww.case.edu/php/chet/bash/bashtop.html"
-if is_release ; then
-	SRC_URI="mirror://gnu/bash/${MY_P}.tar.gz $(patches)"
-else
-	SRC_URI="ftp://ftp.cwru.edu/pub/bash/${MY_P}.tar.gz"
-fi
-
-LICENSE="GPL-3"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~ppc-aix ~x64-cygwin ~amd64-fbsd ~x86-fbsd ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~x86-macos ~m68k-mint ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="afs bashlogger examples mem-scramble +net nls plugins +readline"
-
-DEPEND="
-	>=sys-libs/ncurses-5.2-r2:0=
-	readline? ( >=sys-libs/readline-${READLINE_VER}:0= )
-	nls? ( virtual/libintl )
-"
-RDEPEND="
-	${DEPEND}
-	!<sys-apps/portage-2.1.6.7_p1
-"
-# we only need yacc when the .y files get patched (bash42-005)
-#DEPEND+=" virtual/yacc"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
-	if is-flag -malign-double ; then #7332
-		eerror "Detected bad CFLAGS '-malign-double'.  Do not use this"
-		eerror "as it breaks LFS (struct stat64) on x86."
-		die "remove -malign-double from your CFLAGS mr ricer"
-	fi
-	if use bashlogger ; then
-		ewarn "The logging patch should ONLY be used in restricted (i.e. honeypot) envs."
-		ewarn "This will log ALL output you enter into the shell, you have been warned."
-	fi
-}
-
-src_unpack() {
-	unpack ${MY_P}.tar.gz
-}
-
-src_prepare() {
-	# Include official patches
-	[[ ${PLEVEL} -gt 0 ]] && eapply -p0 $(patches -s)
-
-	# Clean out local libs so we know we use system ones w/releases.
-	if is_release ; then
-		rm -rf lib/{readline,termcap}/*
-		touch lib/{readline,termcap}/Makefile.in # for config.status
-		sed -ri -e 's:\$[(](RL|HIST)_LIBSRC[)]/[[:alpha:]]*.h::g' Makefile.in || die
-	fi
-
-	# Prefixify hardcoded path names. No-op for non-prefix.
-	hprefixify pathnames.h.in
-
-	# Avoid regenerating docs after patches #407985
-	sed -i -r '/^(HS|RL)USER/s:=.*:=:' doc/Makefile.in || die
-	touch -r . doc/*
-
-	eapply -p0 "${FILESDIR}"/${P}-glob-pattern-backslash.patch
-
-	eapply_user
-}
-
-src_configure() {
-	local myconf=(
-		--disable-profiling
-		--docdir='$(datarootdir)'/doc/${PF}
-		--htmldir='$(docdir)/html'
-		--with-curses
-		$(use_enable mem-scramble)
-		$(use_enable net net-redirections)
-		$(use_enable readline)
-		$(use_enable readline bang-history)
-		$(use_enable readline history)
-		$(use_with afs)
-		$(use_with mem-scramble bash-malloc)
-	)
-
-	# For descriptions of these, see config-top.h
-	# bashrc/#26952 bash_logout/#90488 ssh/#24762 mktemp/#574426
-	append-cppflags \
-		-DDEFAULT_PATH_VALUE=\'\"${EPREFIX}/usr/local/sbin:${EPREFIX}/usr/local/bin:${EPREFIX}/usr/sbin:${EPREFIX}/usr/bin:${EPREFIX}/sbin:${EPREFIX}/bin\"\' \
-		-DSTANDARD_UTILS_PATH=\'\"${EPREFIX}/bin:${EPREFIX}/usr/bin:${EPREFIX}/sbin:${EPREFIX}/usr/sbin\"\' \
-		-DSYS_BASHRC=\'\"${EPREFIX}/etc/bash/bashrc\"\' \
-		-DSYS_BASH_LOGOUT=\'\"${EPREFIX}/etc/bash/bash_logout\"\' \
-		-DNON_INTERACTIVE_LOGIN_SHELLS \
-		-DSSH_SOURCE_BASHRC \
-		$(use bashlogger && echo -DSYSLOG_HISTORY)
-
-	# Don't even think about building this statically without
-	# reading Bug 7714 first.  If you still build it statically,
-	# don't come crying to us with bugs ;).
-	#use static && export LDFLAGS="${LDFLAGS} -static"
-	use nls || myconf+=( --disable-nls )
-
-	# Historically, we always used the builtin readline, but since
-	# our handling of SONAME upgrades has gotten much more stable
-	# in the PM (and the readline ebuild itself preserves the old
-	# libs during upgrades), linking against the system copy should
-	# be safe.
-	# Exact cached version here doesn't really matter as long as it
-	# is at least what's in the DEPEND up above.
-	export ac_cv_rl_version=${READLINE_VER%%_*}
-
-	# Force linking with system curses ... the bundled termcap lib
-	# sucks bad compared to ncurses.  For the most part, ncurses
-	# is here because readline needs it.  But bash itself calls
-	# ncurses in one or two small places :(.
-
-	if is_release ; then
-		# Use system readline only with released versions.
-		myconf+=( --with-installed-readline=. )
-	fi
-
-	if use plugins; then
-		append-ldflags -Wl,-rpath,/usr/$(get_libdir)/bash
-	else
-		# Disable the plugins logic by hand since bash doesn't
-		# provide a way of doing it.
-		export ac_cv_func_dl{close,open,sym}=no \
-			ac_cv_lib_dl_dlopen=no ac_cv_header_dlfcn_h=no
-		sed -i \
-			-e '/LOCAL_LDFLAGS=/s:-rdynamic::' \
-			configure || die
-	fi
-	tc-export AR #444070
-	econf "${myconf[@]}"
-}
-
-src_compile() {
-	emake
-
-	if use plugins ; then
-		emake -C examples/loadables all others
-	fi
-}
-
-src_install() {
-	local d f
-
-	default
-
-	dodir /bin
-	mv "${ED%/}"/usr/bin/bash "${ED%/}"/bin/ || die
-	dosym bash /bin/rbash
-
-	insinto /etc/bash
-	doins "${FILESDIR}"/bash_logout
-	doins "$(prefixify_ro "${FILESDIR}"/bashrc)"
-	keepdir /etc/bash/bashrc.d
-	insinto /etc/skel
-	for f in bash{_logout,_profile,rc} ; do
-		newins "${FILESDIR}"/dot-${f} .${f}
-	done
-
-	local sed_args=(
-		-e "s:#${USERLAND}#@::"
-		-e '/#@/d'
-	)
-	if ! use readline ; then
-		sed_args+=( #432338
-			-e '/^shopt -s histappend/s:^:#:'
-			-e 's:use_color=true:use_color=false:'
-		)
-	fi
-	sed -i \
-		"${sed_args[@]}" \
-		"${ED%/}"/etc/skel/.bashrc \
-		"${ED%/}"/etc/bash/bashrc || die
-
-	if use plugins ; then
-		exeinto /usr/$(get_libdir)/bash
-		doexe $(echo examples/loadables/*.o | sed 's:\.o::g')
-		insinto /usr/include/bash-plugins
-		doins *.h builtins/*.h include/*.h lib/{glob/glob.h,tilde/tilde.h}
-	fi
-
-	if use examples ; then
-		for d in examples/{functions,misc,scripts,startup-files} ; do
-			exeinto /usr/share/doc/${PF}/${d}
-			insinto /usr/share/doc/${PF}/${d}
-			for f in ${d}/* ; do
-				if [[ ${f##*/} != PERMISSION ]] && [[ ${f##*/} != *README ]] ; then
-					doexe ${f}
-				else
-					doins ${f}
-				fi
-			done
-		done
-	fi
-
-	doman doc/*.1
-	newdoc CWRU/changelog ChangeLog
-	dosym bash.info /usr/share/info/bashref.info
-}
-
-pkg_preinst() {
-	if [[ -e ${EROOT}/etc/bashrc ]] && [[ ! -d ${EROOT}/etc/bash ]] ; then
-		mkdir -p "${EROOT}"/etc/bash
-		mv -f "${EROOT}"/etc/bashrc "${EROOT}"/etc/bash/
-	fi
-
-	if [[ -L ${EROOT}/bin/sh ]] ; then
-		# rewrite the symlink to ensure that its mtime changes. having /bin/sh
-		# missing even temporarily causes a fatal error with paludis.
-		local target=$(readlink "${EROOT}"/bin/sh)
-		local tmp=$(emktemp "${EROOT}"/bin)
-		ln -sf "${target}" "${tmp}"
-		mv -f "${tmp}" "${EROOT}"/bin/sh
-	fi
-}
-
-pkg_postinst() {
-	# If /bin/sh does not exist, provide it
-	if [[ ! -e ${EROOT}/bin/sh ]] ; then
-		ln -sf bash "${EROOT}"/bin/sh
-	fi
-}
diff --git a/app-shells/bash/files/bash-5.0-glob-pattern-backslash.patch b/app-shells/bash/files/bash-5.0-glob-pattern-backslash.patch
deleted file mode 100644
index 40379b3d4ccd..000000000000
--- a/app-shells/bash/files/bash-5.0-glob-pattern-backslash.patch
+++ /dev/null
@@ -1,133 +0,0 @@
-*** ../bash-5.0/bashline.c	2018-11-27 13:20:16.000000000 -0500
---- bashline.c	2019-01-09 09:44:26.000000000 -0500
-***************
-*** 232,235 ****
---- 232,236 ----
-  static int bash_possible_command_completions __P((int, int));
-  
-+ static int completion_glob_pattern __P((const char *));
-  static char *glob_complete_word __P((const char *, int));
-  static int bash_glob_completion_internal __P((int));
-***************
-*** 1742,1746 ****
-    /* This could be a globbing pattern, so try to expand it using pathname
-       expansion. */
-!   if (!matches && glob_pattern_p (text))
-      {
-        matches = rl_completion_matches (text, glob_complete_word);
---- 1743,1747 ----
-    /* This could be a globbing pattern, so try to expand it using pathname
-       expansion. */
-!   if (!matches && completion_glob_pattern (text))
-      {
-        matches = rl_completion_matches (text, glob_complete_word);
-***************
-*** 1851,1855 ****
-  	}
-  
-!       globpat = glob_pattern_p (hint_text);
-  
-        /* If this is an absolute program name, do not check it against
---- 1852,1856 ----
-  	}
-  
-!       globpat = completion_glob_pattern (hint_text);
-  
-        /* If this is an absolute program name, do not check it against
-***************
-*** 3714,3717 ****
---- 3715,3773 ----
-  }
-  
-+ static int
-+ completion_glob_pattern (string)
-+      const char *string;
-+ {
-+   register int c;
-+   char *send;
-+   int open;
-+ 
-+   DECLARE_MBSTATE;
-+ 
-+   open = 0;
-+   send = string + strlen (string);
-+ 
-+   while (c = *string++)
-+     {
-+       switch (c)
-+ 	{
-+ 	case '?':
-+ 	case '*':
-+ 	  return (1);
-+ 
-+ 	case '[':
-+ 	  open++;
-+ 	  continue;
-+ 
-+ 	case ']':
-+ 	  if (open)
-+ 	    return (1);
-+ 	  continue;
-+ 
-+ 	case '+':
-+ 	case '@':
-+ 	case '!':
-+ 	  if (*string == '(')	/*)*/
-+ 	    return (1);
-+ 	  continue;
-+ 
-+ 	case '\\':
-+ 	  if (*string == 0)
-+ 	    return (0);	 	  
-+ 	}
-+ 
-+       /* Advance one fewer byte than an entire multibyte character to
-+ 	 account for the auto-increment in the loop above. */
-+ #ifdef HANDLE_MULTIBYTE
-+       string--;
-+       ADVANCE_CHAR_P (string, send - string);
-+       string++;
-+ #else
-+       ADVANCE_CHAR_P (string, send - string);
-+ #endif
-+     }
-+   return (0);
-+ }
-+ 
-  static char *globtext;
-  static char *globorig;
-***************
-*** 3878,3882 ****
-      }      
-  
-!   if (t && glob_pattern_p (t) == 0)
-      rl_explicit_arg = 1;	/* XXX - force glob_complete_word to append `*' */
-    FREE (t);
---- 3934,3938 ----
-      }      
-  
-!   if (t && completion_glob_pattern (t) == 0)
-      rl_explicit_arg = 1;	/* XXX - force glob_complete_word to append `*' */
-    FREE (t);
-*** ../bash-5.0/lib/glob/glob_loop.c	2018-12-31 13:35:15.000000000 -0500
---- lib/glob/glob_loop.c	2019-01-09 09:44:36.000000000 -0500
-***************
-*** 55,59 ****
-  
-        case L('\\'):
-- #if 0
-  	/* Don't let the pattern end in a backslash (GMATCH returns no match
-  	   if the pattern ends in a backslash anyway), but otherwise return 1,
---- 55,58 ----
-***************
-*** 61,69 ****
-  	   and it can be removed. */
-  	return (*p != L('\0'));
-- #else
-- 	/* The pattern may not end with a backslash. */
-- 	if (*p++ == L('\0'))
-- 	  return 0;
-- #endif
-        }
-  
---- 60,63 ----