sys-fs/lvm2: Removed old.

Signed-off-by: Lars Wendler <polynomial-c@gentoo.org>
Package-Manager: Portage-2.3.51, Repoman-2.3.11

3 files changed, 0 insertions, 381 deletions

diff --git a/sys-fs/lvm2/files/lvm.rc-2.02.116-r4 b/sys-fs/lvm2/files/lvm.rc-2.02.116-r4
deleted file mode 100644
index 74b4a41b9ea0..000000000000
--- a/sys-fs/lvm2/files/lvm.rc-2.02.116-r4
+++ /dev/null
@@ -1,132 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2016 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-_get_lvm_path() {
-	local lvm_path=
-	for lvm_path in /bin/lvm /sbin/lvm ; do
-		[ -x "$lvm_path" ] && break
-	done
-	echo "${lvm_path}"
-}
-
-_need_lvmetad()
-{
-	local lvm_path="$(_get_lvm_path)"
-	[ ! -x "${lvm_path}" ] && return 1
-	${lvm_path} dumpconfig global | grep -q 'use_lvmetad=1'
-}
-
-depend() {
-	before checkfs fsck
-	after modules device-mapper
-	# We may use lvmetad based on the configuration. If we added lvmetad
-	# support while lvm2 is running then we aren't dependent on it. For the
-	# more common case, if its disabled in the config we aren't dependent
-	# on it.
-	config /etc/lvm/lvm.conf
-	local _need=
-	if service_started; then
-		_need=$(service_get_value need)
-	else
-		if _need_lvmetad; then
-			_need="${_need} lvmetad"
-		fi
-	fi
-	need sysfs ${_need}
-}
-
-config='global { locking_dir = "/run/lock/lvm" }'
-
-dm_in_proc() {
-	local retval=0
-	for x in devices misc ; do
-		grep -qs 'device-mapper' /proc/${x}
-		retval=$((${retval} + $?))
-	done
-	return ${retval}
-}
-
-start() {
-	# LVM support for /usr, /home, /opt ....
-	# This should be done *before* checking local
-	# volumes, or they never get checked.
-
-	# NOTE: Add needed modules for LVM or RAID, etc
-	#       to /etc/modules.autoload if needed
-	lvm_path="$(_get_lvm_path)"
-	for lvm_path in /bin/lvm /sbin/lvm ; do
-		[ -x "$lvm_path" ] && break
-	done
-	if [ ! -x "$lvm_path" ]; then
-		eerror "Cannot find lvm binary in /sbin or /bin!"
-		return 1
-	fi
-	if [ -z "${CDBOOT}" ] ; then
-		if [ -e /proc/modules ] && ! dm_in_proc ; then
-			modprobe dm-mod 2>/dev/null
-		fi
-		if [ -d /proc/lvm ] || dm_in_proc ; then
-			ebegin "Setting up the Logical Volume Manager"
-			#still echo stderr for debugging
-			lvm_commands="#! ${lvm_path} --config '${config}'\n"
-			# Extra PV find pass because some devices might not have been available until very recently
-			lvm_commands="${lvm_commands}pvscan\n"
-			# Now make the nodes
-			lvm_commands="${lvm_commands}vgscan --mknodes\n"
-			# And turn them on!
-			lvm_commands="${lvm_commands}vgchange --sysinit -a ly\n"
-			# Order of this is important, have to work around dash and LVM readline
-			printf "%b\n" "${lvm_commands}" | $lvm_path /proc/self/fd/0 --config "${config}" >/dev/null
-			eend $? "Failed to setup the LVM"
-		fi
-	fi
-}
-
-start_post()
-{
-	# Save if we needed lvmetad
-	if _need_lvmetad; then
-		service_set_value need lvmetad
-	fi
-}
-
-stop() {
-	for lvm_path in /bin/lvm /sbin/lvm ; do
-		[ -x "$lvm_path" ] && break
-	done
-	if [ ! -x "$lvm_path" ]; then
-		eerror "Cannot find lvm binary in /sbin or /bin!"
-		return 1
-	fi
-# Stop LVM2
-if [ -x /sbin/vgs ] && \
-   [ -x /sbin/vgchange ] && \
-   [ -x /sbin/lvchange ] && \
-   [ -f /etc/lvmtab -o -d /etc/lvm ] && \
-   [ -d /proc/lvm  -o "`grep device-mapper /proc/misc 2>/dev/null`" ]
-then
-	einfo "Shutting down the Logical Volume Manager"
-
-        VGS=$($lvm_path vgs --config "${config}" -o vg_name --noheadings --nosuffix --rows 2> /dev/null)
-
-        if [ "$VGS" ]
-        then
-            ebegin "  Shutting Down LVs & VGs"
-			#still echo stderr for debugging
-			lvm_commands="#! ${lvm_path} --config '${config}'\n"
-			# Extra PV find pass because some devices might not have been available until very recently
-			lvm_commands="${lvm_commands}lvchange --sysinit -a ln ${VGS}\n"
-			# Now make the nodes
-			lvm_commands="${lvm_commands}vgchange --sysinit -a ln ${VGS}\n"
-			# Order of this is important, have to work around dash and LVM readline
-			printf "%b\n" "${lvm_commands}" | $lvm_path /proc/self/fd/0 --config "${config}" >/dev/null
-			eend $? "Failed (possibly some LVs still needed for /usr or root)"
-        fi
-
-	einfo "Finished shutting down the Logical Volume Manager"
-	return 0
-fi
-}
-
-# vim:ts=4
diff --git a/sys-fs/lvm2/files/lvm.rc-2.02.166-r2 b/sys-fs/lvm2/files/lvm.rc-2.02.166-r2
deleted file mode 100644
index 11329bbeaf33..000000000000
--- a/sys-fs/lvm2/files/lvm.rc-2.02.166-r2
+++ /dev/null
@@ -1,145 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-_get_lvm_path() {
-	local lvm_path=
-	for lvm_path in /bin/lvm /sbin/lvm ; do
-		[ -x "$lvm_path" ] && break
-	done
-	echo "${lvm_path}"
-}
-
-_need_lvmetad()
-{
-	local lvm_path="$(_get_lvm_path)"
-	[ ! -x "${lvm_path}" ] && return 1
-	${lvm_path} dumpconfig global 2>/dev/null | grep -q 'use_lvmetad=1'
-}
-
-_need_lvmlockd()
-{
-	local lvm_path="$(_get_lvm_path)"
-	[ ! -x "${lvm_path}" ] && return 1
-	${lvm_path} dumpconfig global 2>/dev/null | grep -q 'use_lvmlockd=1'
-}
-depend() {
-	before checkfs fsck
-	after modules device-mapper
-	# We may use lvmetad based on the configuration. If we added lvmetad
-	# support while lvm2 is running then we aren't dependent on it. For the
-	# more common case, if its disabled in the config we aren't dependent
-	# on it.
-	config /etc/lvm/lvm.conf
-	local _need=
-	if service_started; then
-		_need=$(service_get_value need)
-	else
-		if _need_lvmetad; then
-			_need="${_need} lvmetad"
-		fi
-		if _need_lvmlockd; then
-			_need="${_need} lvmlockd"
-		fi
-	fi
-	need sysfs ${_need}
-}
-
-config='global { locking_dir = "/run/lock/lvm" }'
-
-dm_in_proc() {
-	local retval=0
-	for x in devices misc ; do
-		grep -qs 'device-mapper' /proc/${x}
-		retval=$((${retval} + $?))
-	done
-	return ${retval}
-}
-
-start() {
-	# LVM support for /usr, /home, /opt ....
-	# This should be done *before* checking local
-	# volumes, or they never get checked.
-
-	# NOTE: Add needed modules for LVM or RAID, etc
-	#       to /etc/modules.autoload if needed
-	lvm_path="$(_get_lvm_path)"
-	for lvm_path in /bin/lvm /sbin/lvm ; do
-		[ -x "$lvm_path" ] && break
-	done
-	if [ ! -x "$lvm_path" ]; then
-		eerror "Cannot find lvm binary in /sbin or /bin!"
-		return 1
-	fi
-	if [ -z "${CDBOOT}" ] ; then
-		if [ -e /proc/modules ] && ! dm_in_proc ; then
-			modprobe dm-mod 2>/dev/null
-		fi
-		if [ -d /proc/lvm ] || dm_in_proc ; then
-			ebegin "Setting up the Logical Volume Manager"
-			#still echo stderr for debugging
-			lvm_commands="#! ${lvm_path} --config '${config}'\n"
-			# Extra PV find pass because some devices might not have been available until very recently
-			lvm_commands="${lvm_commands}pvscan\n"
-			# Now make the nodes
-			lvm_commands="${lvm_commands}vgscan --mknodes\n"
-			# And turn them on!
-			lvm_commands="${lvm_commands}vgchange --sysinit -a ly\n"
-			if _need_lvmlockd; then
-				# Start lockd VGs as required
-				lvm_commands="${lvm_commands}vgchange --lock-start --lock-opt auto\n"
-			fi
-			# Order of this is important, have to work around dash and LVM readline
-			printf "%b\n" "${lvm_commands}" | $lvm_path /proc/self/fd/0 --config "${config}" >/dev/null
-			eend $? "Failed to setup the LVM"
-		fi
-	fi
-}
-
-start_post()
-{
-	# Save if we needed lvmetad
-	if _need_lvmetad; then
-		service_set_value need lvmetad
-	fi
-}
-
-stop() {
-	for lvm_path in /bin/lvm /sbin/lvm ; do
-		[ -x "$lvm_path" ] && break
-	done
-	if [ ! -x "$lvm_path" ]; then
-		eerror "Cannot find lvm binary in /sbin or /bin!"
-		return 1
-	fi
-# Stop LVM2
-if [ -x /sbin/vgs ] && \
-   [ -x /sbin/vgchange ] && \
-   [ -x /sbin/lvchange ] && \
-   [ -f /etc/lvmtab -o -d /etc/lvm ] && \
-   [ -d /proc/lvm  -o "`grep device-mapper /proc/misc 2>/dev/null`" ]
-then
-	einfo "Shutting down the Logical Volume Manager"
-
-        VGS=$($lvm_path vgs --config "${config}" -o vg_name --noheadings --nosuffix --rows 2> /dev/null)
-
-        if [ "$VGS" ]
-        then
-            ebegin "  Shutting Down LVs & VGs"
-			#still echo stderr for debugging
-			lvm_commands="#! ${lvm_path} --config '${config}'\n"
-			# Extra PV find pass because some devices might not have been available until very recently
-			lvm_commands="${lvm_commands}lvchange --sysinit -a ln ${VGS}\n"
-			# Now make the nodes
-			lvm_commands="${lvm_commands}vgchange --sysinit -a ln ${VGS}\n"
-			# Order of this is important, have to work around dash and LVM readline
-			printf "%b\n" "${lvm_commands}" | $lvm_path /proc/self/fd/0 --config "${config}" >/dev/null
-			eend $? "Failed (possibly some LVs still needed for /usr or root)"
-        fi
-
-	einfo "Finished shutting down the Logical Volume Manager"
-	return 0
-fi
-}
-
-# vim:ts=4
diff --git a/sys-fs/lvm2/files/lvm2-2.02.172-static-pkgconfig-libs.patch b/sys-fs/lvm2/files/lvm2-2.02.172-static-pkgconfig-libs.patch
deleted file mode 100644
index e25cb760ea89..000000000000
--- a/sys-fs/lvm2/files/lvm2-2.02.172-static-pkgconfig-libs.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-diff -Nuar --exclude '*.orig' --exclude '*.rej' LVM2.2.02.172.orig/configure.in LVM2.2.02.172/configure.in
---- LVM2.2.02.172.orig/configure.in	2017-06-28 08:54:27.000000000 -0700
-+++ LVM2.2.02.172/configure.in	2017-07-09 14:58:11.933777531 -0700
-@@ -1324,6 +1324,7 @@
- 	PKG_CHECK_MODULES(BLKID, blkid >= 2.24,
- 			  [ BLKID_WIPING=yes
- 			    BLKID_PC="blkid"
-+				BLKID_STATIC_LIBS=`$PKG_CONFIG --static --libs $BLKID_PC`
- 			    DEFAULT_USE_BLKID_WIPING=1
- 			    AC_DEFINE([BLKID_WIPING_SUPPORT], 1, [Define to 1 to use libblkid detection of signatures when wiping.])
- 			  ], [if test "$BLKID_WIPING" = maybe; then
-@@ -1372,6 +1373,7 @@
- if test "$UDEV_SYNC" = yes; then
- 	pkg_config_init
- 	PKG_CHECK_MODULES(UDEV, libudev >= 143, [UDEV_PC="libudev"])
-+	UDEV_STATIC_LIBS=`$PKG_CONFIG --static --libs libudev`
- 	AC_DEFINE([UDEV_SYNC_SUPPORT], 1, [Define to 1 to enable synchronisation with udev processing.])
- 
- 	AC_CHECK_LIB(udev, udev_device_get_is_initialized, AC_DEFINE([HAVE_LIBUDEV_UDEV_DEVICE_GET_IS_INITIALIZED], 1,
-@@ -1653,19 +1655,32 @@
- if test "$SELINUX" = yes; then
- 	AC_CHECK_LIB([sepol], [sepol_check_context], [
- 		AC_DEFINE([HAVE_SEPOL], 1, [Define to 1 if sepol_check_context is available.])
--		SELINUX_LIBS="-lsepol"])
-+		SEPOL_LIBS="-lsepol"])
-+
-+	dnl -- init pkgconfig if required
-+	if  test x$PKGCONFIG_INIT != x1; then
-+		pkg_config_init
-+	fi
-+	PKG_CHECK_MODULES(SELINUX, libselinux, [
-+		SELINUX_PC="libselinux"
-+		SELINUX_STATIC_LIBS=`$PKG_CONFIG --static --libs libselinux`
-+		SELINUX_LIBS="$SELINUX_LIBS $SEPOL_LIBS"
-+		AC_DEFINE([HAVE_SELINUX], 1, [Define to 1 to include support for selinux.])
-+	],[
-+		dnl -- old non-pkgconfig method, is buggy with static builds
- 
- 	AC_CHECK_LIB([selinux], [is_selinux_enabled], [
- 		AC_CHECK_HEADERS([selinux/selinux.h],, hard_bailout)
- 		AC_CHECK_HEADERS([selinux/label.h])
- 		AC_DEFINE([HAVE_SELINUX], 1, [Define to 1 to include support for selinux.])
--		SELINUX_LIBS="-lselinux $SELINUX_LIBS"
-+		SELINUX_LIBS="-lselinux $SEPOL_LIBS"
- 		SELINUX_PC="libselinux"
- 		HAVE_SELINUX=yes ], [
- 		AC_MSG_WARN(Disabling selinux)
- 		SELINUX_LIBS=
- 		SELINUX_PC=
- 		HAVE_SELINUX=no ])
-+	])
- fi
- 
- ################################################################################
-@@ -2011,6 +2026,7 @@
- ################################################################################
- AC_SUBST(APPLIB)
- AC_SUBST(AWK)
-+AC_SUBST(BLKID_STATIC_LIBS)
- AC_SUBST(BLKID_PC)
- AC_SUBST(BUILD_CMIRRORD)
- AC_SUBST(BUILD_DMEVENTD)
-@@ -2125,6 +2141,7 @@
- AC_SUBST(SALCK_CFLAGS)
- AC_SUBST(SALCK_LIBS)
- AC_SUBST(SELINUX_LIBS)
-+AC_SUBST(SELINUX_STATIC_LIBS)
- AC_SUBST(SELINUX_PC)
- AC_SUBST(SNAPSHOTS)
- AC_SUBST(STATICDIR)
-@@ -2140,6 +2157,7 @@
- AC_SUBST(CACHE_DUMP_CMD)
- AC_SUBST(CACHE_REPAIR_CMD)
- AC_SUBST(CACHE_RESTORE_CMD)
-+AC_SUBST(UDEV_STATIC_LIBS)
- AC_SUBST(UDEV_PC)
- AC_SUBST(UDEV_RULES)
- AC_SUBST(UDEV_SYNC)
-diff -Nuar --exclude '*.orig' --exclude '*.rej' LVM2.2.02.172.orig/make.tmpl.in LVM2.2.02.172/make.tmpl.in
---- LVM2.2.02.172.orig/make.tmpl.in	2017-06-28 08:54:28.000000000 -0700
-+++ LVM2.2.02.172/make.tmpl.in	2017-07-09 14:56:38.262933483 -0700
-@@ -53,7 +53,7 @@
- 
- LIBS = @LIBS@
- # Extra libraries always linked with static binaries
--STATIC_LIBS = $(SELINUX_LIBS) $(UDEV_LIBS) $(BLKID_LIBS)
-+STATIC_LIBS = $(SELINUX_STATIC_LIBS) $(UDEV_STATIC_LIBS) $(BLKID_STATIC_LIBS)
- DEFS += @DEFS@
- # FIXME set this only where it's needed, not globally?
- CFLAGS ?= @COPTIMISE_FLAG@ @CFLAGS@
-@@ -68,10 +68,13 @@
- PTHREAD_LIBS = @PTHREAD_LIBS@
- READLINE_LIBS = @READLINE_LIBS@
- SELINUX_LIBS = @SELINUX_LIBS@
-+SELINUX_STATIC_LIBS = @SELINUX_STATIC_LIBS@
- UDEV_CFLAGS = @UDEV_CFLAGS@
- UDEV_LIBS = @UDEV_LIBS@
-+UDEV_STATIC_LIBS = @UDEV_STATIC_LIBS@
- BLKID_CFLAGS = @BLKID_CFLAGS@
- BLKID_LIBS = @BLKID_LIBS@
-+BLKID_STATIC_LIBS = @BLKID_STATIC_LIBS@
- VALGRIND_CFLAGS = @VALGRIND_CFLAGS@
- TESTING = @TESTING@
-