diff options
Diffstat (limited to 'dev-embedded/openocd/openocd-9999.ebuild')
-rw-r--r-- | dev-embedded/openocd/openocd-9999.ebuild | 134 |
1 files changed, 0 insertions, 134 deletions
diff --git a/dev-embedded/openocd/openocd-9999.ebuild b/dev-embedded/openocd/openocd-9999.ebuild deleted file mode 100644 index 5f112f4..0000000 --- a/dev-embedded/openocd/openocd-9999.ebuild +++ /dev/null @@ -1,134 +0,0 @@ -# Copyright 1999-2017 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -EAPI=6 - -inherit eutils multilib flag-o-matic toolchain-funcs udev autotools git-r3 -EGIT_REPO_URI="https://git.code.sf.net/p/${PN}/code" -EGIT_SUBMODULES=("-*libjaylink" "-jimtcl") - -DESCRIPTION="OpenOCD - Open On-Chip Debugger" -HOMEPAGE="http://openocd.sourceforge.net" - -LICENSE="GPL-2+" -SLOT="0" -IUSE="+cmsis-dap dummy +ftdi +jlink parport +usb verbose-io" -RESTRICT="strip" # includes non-native binaries - -RDEPEND=" - >=dev-lang/jimtcl-0.76 - cmsis-dap? ( dev-libs/hidapi ) - jlink? ( >=dev-embedded/libjaylink-0.1.0 ) - usb? ( - virtual/libusb:0 - virtual/libusb:1 - ) - ftdi? ( dev-embedded/libftdi ) -" - -DEPEND=" - ${RDEPEND} - virtual/pkgconfig - >=sys-apps/texinfo-5 -" - -src_prepare() { - default - - AT_NO_RECURSIVE=yes eautoreconf -} - -src_configure() { - # Here are some defaults - local myconf=( - --enable-buspirate - --disable-werror - --disable-internal-jimtcl - --disable-internal-libjaylink - --enable-amtjtagaccel - --enable-ep93xx - --enable-at91rm9200 - --enable-gw16012 - --enable-arm-jtag-ew - --enable-sysfsgpio - --enable-bcm2835gpio - ) - - # Adapters requiring usb/libusb-1.X support - if use usb; then - myconf+=( - --enable-aice - --enable-usb-blaster-2 - --enable-ftdi - --enable-ti-icdi - --enable-ulink - --enable-osbdm - --enable-opendous - --enable-usbprog - --enable-rlink - --enable-stlink - --enable-vsllink - --enable-armjtagew - $(use_enable verbose-io verbose-usb-io) - $(use_enable verbose-io verbose_usb_comms) - ) - else - myconf+=( - --disable-aice - --disable-usb-blaster-2 - --disable-ftdi - --disable-ti-icdi - --disable-ulink - --disable-osbdm - --disable-opendous - --disable-usbprog - --disable-jlink - --disable-rlink - --disable-stlink - --disable-vsllink - --disable-armjtagew - ) - fi - - if use jlink; then - myconf+=( - --enable-jlink - ) - else - myconf+=( - --disable-jlink - ) - fi - - if use ftdi; then - myconf+=( - --enable-usb_blaster - --enable-openjtag - --enable-presto - ) - else - myconf+=( - --disable-openjtag - --disable-presto - --disable-usb_blaster - ) - fi - - econf \ - $(use_enable dummy) \ - $(use_enable cmsis-dap) \ - $(use_enable parport) \ - $(use_enable parport parport_ppdev) \ - $(use_enable verbose-io verbose-jtag-io) \ - "${myconf[@]}" -} - -src_install() { - default - env -uRESTRICT prepstrip "${ED}"/usr/bin - udev_dorules ${D}/usr/share/${PN}/contrib/*.rules -} - -pkg_postinst() { - elog "To access openocd devices as user you must be in the plugdev group" -} |